Minolta 6100 - Manuals

Minolta 6100 – Manual in PDF format online.

Manuals:

Manual Minolta 6100

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10

Summary

Page 4 - Converting your; magicolor; 100 DeskLaser printer to a magicolor 6100 Crown Print; Replacing the controller board.

Converting your magicolor 6100 DeskLaser printer to a magicolor 6100 Crown Print System involves two steps: 1 Replacing the controller board. 2 Applying the new product labels. ▲ Caution : It’s very important to protect the printer controller board from electrostatic damage while performing this con...

Page 6 - Refer to the appropriate chapter(s) of your; magicolor 6100 Print System Options; manual for instructions.; 0 Reinstall the controller board into the printer.

7 Insert each DIMM straight down into the DIMM connector until the latches snap into the locked position. When seated, the DIMM stands upright, firmly in place. If you can-not snap the DIMM into place, do not force it. Reposition it, making sure that the bottom of the DIMM is seated completely in th...

Page 7 - 100 Crown Print System. Verify that

13 Check the startup page. After the printer warms up, a startup page similar to the one shown below prints. The startup page indicates that the printer has successfully been converted from a magicolor 6100 DeskLaser to a magicolor 6100 Crown Print System. Verify that the memory and options that wer...

Minolta Manuals