Milwaukee 9075-20 - User Manual

1/2" SQUARE DRIVE
HEX SOCKETS

Standard equipment for 9072-22 Kit.

49-66-3080

1/2"

49-66-3110

11/16"

49-66-3090

9/16"

49-66-3120

3/4"

49-66-3100

5/8"

49-66-3130

13/16"

5" LENGTH 1/2" SQUARE-
DRIVE EXTENSION

48-95-5000

Adapts to 1/2" Square Drive. Provides 5"
additional length where required for use with
sockets.

1/2" SQUARE DRIVE UNIVERSAL JOINT

48-03-0500

Fits 1/2" Square Drive.Use with Hex Sockets
to reach difficult places at various angles...
also allows clearance around obstructions.

1/2" SQUARE DRIVE TO 7/16" HEX
QUICK-CHANGE ADAPTER

48-66-0061

Use with 7/16" hex shank auger bits,
selfeed bits or other 7/16" hex shank acces-
sories which have ball-retainer grooves.

RETAINING RINGS FOR 3/4" SQUARE ANVILS

44-86-0282

1-7/16" ID (use with 1-1/2" hub sockets)

44-86-0285

1-5/8" ID (use with 1-3/4" hub sockets)

ROUND END DETENT KIT

49-17-0410

Use with 9066-6, 9068, 9070-20, 9072-20
and 9075-20. For quick socket changes.

FLAT END DETENT KIT

49-17-0405

For 9066-6, 9068, 9070-20, 9072-20 and
9075-20.

Replaces standard round detent pin on 9066-
6, 9068. Socket will not slip off unless detent
pin is pressed in.

Below Serial No. 656-38701, Use 49-17-0400
Positive Detent Kit

5/8" HEX QUICK-CHANGE
CONVERSION KIT

14-46-9095

Completely assembled, easily converts
7/16" front end to 5/8" hex.

CHUCK ADAPTOR
48-66-0065

For 9092-20 and 9099-20.

Adds versatility by enabling these tools
to drill small holes (1/2" diameter max.)
with jobber bits in steel, wood and plastic;
or with carbide tipped bits to drill mortar,
brick, etc. (NOT for use with any accessory
that results in continuous impacting.)

GREASE

49-08-7655

Type “Z” grease. For 9070-20, 9071-20,
9072-20.

49-08-4220

Type “J” grease. For 9075-20.

H

E

A

V

Y

-

D

U

T

Y

76

SPECIFICATIONS

IMPACTS

NO

NET

SHIP

CAT.

PER

LOAD

TORQUE LENGTH WGT.

WGT.

NO.

VOLTS

AMPS

MINUTE

RPM

FT./LBS.

INCHES LBS.

LBS.

9075-20

120 AC/DC

7.0

2500

1,750

380

11-5/8

6.2

8.0

9092-20

120 AC

7.0

1000-2600

600-1,800

315

12-1/4

6.5

7.8

STANDARD EQUIPMENT: FOR 9075-20 –

Tool and 8' 2-Wire Fixed Cord.

FOR 9092-20 –

Tool and Quik-Lok

®

Cord 48-76-5010.

380

FT.-LBS.

OF TORQUE!

ACCESSORIES

HEAVY-DUTY

3/4" AND 7/16" IMPACT WRENCHES

SEE PAGES 13, 24,

AND 28

FOR CORDLESS

IMPACT WRENCHS

9092-20

•

7/16" HEX QUICK-CHANGE
DUAL BALL BIT HOLDER

•

10' QUIK-LOK CORD

FULL POWER IN REVERSE
BEST POWER TO WEIGHT RATIO

■

New Mechanism Delivers Higher Torque
And Smoother Operation

■

Metal Housing

■

7.0 Amp Milwaukee Built Motor

■

Soft Grip Handle

■

Ergonomically Balanced Center Grip

9075-20 FEATURES:

■

3/4" Square Drive With Friction Ring
and Through Hole Rocket Retention

■

Forward/Reverse Rocker Switch (AC/DC)
Is Ideal When Frequent Reversing Is
Necessary

9092-20 FEATURES:

■

7/16" Hex Quick-Change Dual Ball Bit
Holder

■

Forward/Reverse Lever

■

Hanger Bracket w/Solid Steel Ring

for

hanging on belts, climbing pegs and for lifting
with a rope and clasp.

■

Variable Speed Trigger with Speed Setting
Dial

9075-20

•

3/4" SQUARE DRIVE WITH FRICTION
RING AND THROUGH HOLE SOCKET RETENTION

315

FT.-LBS.

OF TORQUE!