Milwaukee 6509 - User Manual
Milwaukee 6509 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Symbology
- Page 4 – EXTENSION CORDS; READ AND SAVE ALL INSTRUCTIONS; GROUNDING
- Page 5 – TOOL ASSEMBLY
- Page 7 – OPERATION
- Page 8 – MAINTENANCE; ACCESSORIES
- Page 10 – RÈGLES DE SÉCURITÉ PARTICULIÈRE; Pictographie
- Page 11 – LISEZ ATTENTIVEMENT CES INSTRUCTIONS
- Page 14 – MANIEMENT
- Page 15 – ACCESSOIRES
- Page 17 – REGLAS ESPECIFICAS DE SEGURIDAD; Simbología
- Page 18 – LEA Y GUARDE TODAS LAS INSTRUCCIONES
- Page 19 – ENSAMBAJE DE LA HERRAMIENTA
- Page 21 – OPERACION
- Page 22 – MANTENIMIENTO
- Page 24 – MILWAUKEE ELECTRIC TOOL CORPORATION; UNITED STATES; authorized; Brookfield, Wisconsin USA; CANADA; Service; MEXICO; Servicios de; Milwaukee Electric Tool; agréés
SAWZALL
®
PASSE-PARTOUT SAWZALL
®
SIERRAS SABLE SAWZALL
®
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.
Catalog No.
No de Cat.
Catálogo No.
6519 Series
Séries 6519
Serie 6519
Catalog No.
No de Cat.
Catálogo No.
6509 Series
Séries 6509
Serie 6509
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 6509
Summary
page 3 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a live wire will make exposed metal parts of the tool live and shock the operator. 2. Use clamps or another practical way to secur...
page 4 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge exten- sion cord. Using extension cords with inadequately sized wire causes a serious dr...
page 5 Removing and Replacing Quik-Lok ® Cords (Fig. 1) (Select Models) MILWAUKEE 's exclusive Quik-Lok ® Cords provide instant field replace- ment or substitution. Fig. 1 1. To remove the Quik-Lok ® Cord, turn the cord nut 1/4 turn to the left and pull it out. 2. To replace the Quik-Lok ® Cord, ali...
