Milwaukee 6230 - Manual
Milwaukee 6230 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – FUNCTIONAL DESCRIPTION; SPECIFIC SAFETY RULES; FPM
- Page 4 – GROUNDING; READ AND SAVE ALL INSTRUCTIONS; WARNING
- Page 6 – OPERATION
- Page 9 – Spécifi cations
- Page 10 – MISE À LA TERRE; LISEZ ATTENTIVEMENT CES INSTRUCTIONS; AVERTISSEMENT
- Page 15 – Simbología; Especifi caciones
- Page 16 – TIERRA; LEA Y GUARDE TODAS LAS INSTRUCCIONES; ADVERTENCIA
- Page 20 – MILWAUKEE ELECTRIC TOOL CORPORATION; UNITED STATES; MILWAUKEE Service; authorized; Brookfi eld, Wisconsin USA; CANADA; Service MILWAUKEE; MEXICO; Servicios de MILWAUKEE; Milwaukee Electric Tool; agréés
BAND SAW
SCIE À RUBAN
SIERRA CLINTA
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OP-
ERADOR.
Catalog No.
No de Cat.
Catálogo No.
6225
Catalog No.
No de Cat.
Catálogo No.
6230
6236
DEEP CUT BAND SAW
SCIE À RUBAN PORTATIVE
SIERRAS CLINTA DE CORTE PROFUNDO
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
page 3 Recom- mended Blades Rectangular Stock FUNCTIONAL DESCRIPTION 1. Trigger 2. Handle 3. Two-speed switch 4. Work steady rest 5. Blade 6. Tension lock handle 7. Front handle 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden ...
page 4 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Us-ing extension cords with inadequately sized wire causes a serious dro...
page 6 Two Speed Switch (Cat. Nos. 6225 & 6236) MILWAUKEE Two-Speed Band Saws are equipped with a speed change switch located below the trigger on the handle. To change speeds, stop the motor and slide the speed change switch to "HI" or "LO" as indicated on the tool. For cutting ...
