Milwaukee 6176-20 - Manual
Milwaukee 6176-20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SPECIAL SAFETY INSTRUCTIONS - ABRASIVE CUT-OFF MACHINES; SERVICE
- Page 5 – GROUNDING; READ AND SAVE ALL INSTRUCTIONS FOR
- Page 6 – OPERATION
- Page 8 – MAINTENANCE; ACCESSORIES; WARRANTY
- Page 12 – MISE À LA TERRE; LISEZ ATTENTIVEMENT CES INSTRUCTIONS
- Page 13 – MANIEMENT
- Page 15 – GARANTIE
- Page 20 – TIERRA; LEA Y GUARDE TODAS LAS INSTRUCCIONES
- Page 21 – OPERACION
- Page 23 – MANTENIMIENTO; ACCESORIOS
- Page 24 – Printed in Taiwan; MILWAUKEE ELECTRIC TOOL CORPORATION; A Company within the Atlas Copco Group; UNITED STATES; MILWAUKEE Service; ERVICE; CANADA; Service MILWAUKEE; M E X I C O; Servicios de MILWAUKEE; Milwaukee Electric Tool
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
HEAVY-DUTY 14" ABRASIVE CUT-OFF MACHINE
EXTRA ROBUSTE TRONÇONNEUSE 35,6 cm À DISQUE ABRASIF
SIERRA TRONZADORA ABRASIVA DE 35,6 cm, HEAVY DUTY
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.
Catalog No.
No de Cat.
Número de Catálogo
6176-20
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 6176-20
Summary
page 3 SPECIAL SAFETY INSTRUCTIONS - ABRASIVE CUT-OFF MACHINES W h e e l I n s t r u c t i o n s 1. Use only the edge (not the sides) of the wheel for cutting. Do notallow the wheel to twist or bind. 2. Keep hands and body away from the rotating wheel. Do not wearloose clothing when using this tool....
page 5 Grounded tools require a three wire extension cord. Double insulatedtools can use either a two or three wire extension cord. As the distancefrom the supply outlet increases, you must use a heavier gauge exten-sion cord. Using extension cords with inadequately sized wire causes aserious drop i...
page 6 OPERATION Using the Hold-Down Chain This tool is equipped with a hold-down chain which locks the handledown for transporting and storing the tool. To release the hold downchain, pull the handle down and lift the chain off the hook. To lock thechain, pull the handle down and loop the chain ont...
