Milwaukee 2731-20 - Manual
Milwaukee 2731-20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS
- Page 3 – US; MILWAUKEE
- Page 6 – LIMITED WARRANTY - USA AND CANADA; LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ.
- Page 9 – APPLICATIONS
- Page 13 – Selección de la cuchilla; FUNCTIONAL DESCRIPTION; Recargue la batería; ADVERTENCIA; Para reducir el; Instalación y extracción de las cuchillas
- Page 14 – Para reducir el riesgo
- Page 15 – El polvo, las rebabas
- Page 16 – MANTENIMIENTO; ACCESORIOS
- Page 17 – MILWAUKEE ELECTRIC TOOL CORPORATION; UNITED STATES; MILWAUKEE Service; CANADA; CENTRO DE ATENCION A CLIENTES; MEXICO; - Soporte de Servicio; Contacta nuestro servicio técnico para....
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
M18
TM
FUEL ™ 7-1/4" CIRCULAR SAW
SCIE CIRCULAIRE DE 184 mm (7-1/4") M18
TM
FUEL ™
SIERRA CIRCULAR DE 184 mm (7-1/4”) DE M18
TM
FUEL ™
Cat. No.
No de cat.
2731-20
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 2731-20
Summary
2 3 BATTERY TOOL USE AND CARE SPECIFIC SAFETY RULES PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmos- pheres, such as in the presence of...
4 5 Cat. No. Volts DC No Load RPM Blade Size Arbor Depth of Cut At 90° Depth of Cut at 45° 2731-20 18 5000 7-1/4" 5/8" 0 to 2-1/2" 0 to 1-13/16" FUNCTIONAL DESCRIPTION SYMBOLOGY SPECIFICATIONS ASSEMBLY WARNING Recharge only with the charger specifi ed for the battery. For specifi c c...
10 11 TECHTRONIC INDUSTRIES' warranty is for 5 year since the original purchase date.This warranty card covers any defect in material and workmanship on this Power Tool.To make this warranty valid, present this warranty card, sealed/stamped by the distributor or store where you pur-chased the produc...
