Miele PWM 511 [EL DV DD] - Installation Manual

Page 2 - Contents; Installation notes

Contents 2 Installation notes ............................................................................................................. 3 Explanation of the safety instructions and warnings on the machine ............................... 3 Installation requirements ..................................

Page 3 - Installation requirements; General operating conditions

Installation notes *INSTALLATION* 3 Explanation of the safety instructions and warnings on themachine Read the operating instructions Read all the instructions, e.g. the installation instruc-tions Warning, hot surfaces Warning, voltage up to 1000 volts Earthing Equipotential bonding Installation req...

Page 4 - Transportation and site access; The washing machine must not be installed on a carpeted floor.; Installation on concrete plinth; The washing machine must be secured to the plinth immedi-

Installation notes *INSTALLATION* 4 Transportation and site access The machine must not be moved without the transit bars in place.Keep the transit bars in a safe place. They must be refitted if the ma-chine is to be moved again (e.g. when relocating the machine). Installation Transport the washing ...

Page 5 - Levelling the machine; Electrical connection; This washing machine must be connected to an electrical mains

Installation notes *INSTALLATION* 5 Levelling the machine  Align the washing machine vertically and horizontally using the ad-justable feet and a spirit level. The washing machine must stand evenly and horizontally on all fourfeet to ensure trouble-free and energy-efficient operation. Otherwisethe ...

Page 6 - We recommend connection to the power supply via a suitably; Water connection; Non-return valves are included in the scope of supply.

Installation notes *INSTALLATION* 6 Tip: We recommend connection to the power supply via a suitably rated plug and socket which must be easily accessible for servicingand maintenance work after the machine has been installed. An elec-trical safety test must be carried out after installation and afte...

Page 7 - Outflowing suds can be as hot as 95 °C. Danger of burning!

Installation notes *INSTALLATION* 7 The water inlet hose for cold water is not suitable for connection toa hot water supply. Hot water con-nection The same connection requirements as for cold water also apply tohot water up to 60 °C. A suitable connection hose with a threaded union is supplied with ...

Page 8 - There are the following options for draining the machine:; Dispenser connection

Installation notes *INSTALLATION* 8 Drain pump (de-pending onmodel) In machines with drain pump, the suds are drained through a drainpump with a delivery head of max. 1 m. The drain hose must be installed free of kinks for the suds to drainfreely. There are the following options for draining the mac...

Page 9 - Optional accessories; Payment device

Installation notes *INSTALLATION* 9 Optional accessories Only use genuine Miele spare parts and accessories with this ma-chine.Using spare parts or accessories from other manufacturers will in-validate the guarantee, and Miele cannot accept liability. APWM 019/020Connector Box The Connector Box allo...

Page 10 - Connected appliances must also comply with SELV.

Installation notes *INSTALLATION* 10 WiFi/LAN inter-face The washing machine is equipped with a WiFi/LAN interface for ex-changing data. The data interface provided on the LAN connection complies withSELV (Safety Extra Low Voltage) in accordance with EN 60950. TheLAN connection uses a RJ45 connector...

Page 11 - Installation; Standard

Installation 11 Standard a Electrical connection b Cold water connection c Hot water connection d Drain pipe (DV versions only) e Drain connection (DP versions only)

Page 13 - Plinth

Installation 13 Plinth a Electrical connection b Cold water connection c Hot water connection d Drain pipe (DV versions only) e Drain connection (DP versions only)

Page 15 - Machine foot

Installation *INSTALLATION* 15 Standard Dimensions in mm  Machine foot j Overflow

Page 17 - Securing the machine

Installation *INSTALLATION* 17 Securing the machine Standard Plinth Dimensions in mm  Screw/anchor point

Page 18 - Technical data; Voltage versions and electrical data

Technical data 18 Voltage versions and electrical data 3N AC 400 V EL DV Supply voltage 3N AC 400 V Frequency 50/60 Hz Required fuse rating (on site) Circuit breaker trip characteristic 3 x 16 A Type B Power rating 8,2 kW Connection cable, min. cross-section 5 x 1,5 mm² 3N AC 400 V EL DP Supply volt...

Page 19 - Plumbing; Cold water connection; Equipotential bonding

Technical data 19 Plumbing Cold water connection Required flow pressure 100 - 1000 kPa (1 - 10 bar) Maximum flow rate 10 l/min Threaded union required (male thread, to be provided by customer in accordance withDIN 44991, flat sealing) 3/4 " Length of water inlet hose included in scope of supply ...

Page 20 - Anchoring; Transport data, weight and floor load

Technical data 20 Anchoring Standard Required anchor points 2 DIN 571 wood screw (diameter x length) 12 mm x 90 mm Rawl plugs (diameter x length) 16 mm x 80 mm With plinth (APWM) Required anchor points 4 DIN 571 wood screw (diameter x length) 12 mm x 90 mm Rawl plugs (diameter x length) 16 mm x 80 m...