Miele E 745/1 - User Manual
Miele E 745/1 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
M.-Nr. 07 333 150 / 00
en
E 745/1 injector module for pipettes
Items supplied:
1 x E 745/1 injector module, H 288, W 492, D 496 mm
^
With the pointed end facing downwards, place each
pipette through the grid into the appropriate holder in the
base.
Bulb pipettes:
^
If the a pipette does not fit through the grid, the lower
shaft of the pipette must be long enough for the tip to
reach the holder in the base.
Placing pipettes into the injector module:
Areas of application:
This injector module is used in the lower level of the
E 741/1 mobile unit.
104 pipettes up to 540 mm in height can be processed in
this injector module.
Each compartment in the holder frame measures
16 x 16 mm.
The pipettes must not be allowed to touch each other. To
give the pipettes more space, it may be necessary to
place fewer pipettes in the injector module.
This injector module should only be used for processing
laboratory glassware which has been declared as suitable
for machine processing by the glassware manufacturer.
,
Please observe the Warning and Safety instructions
in the Operating Instructions for your washer-disinfector
as well as any instructions provided by the glassware
manufacturer.
Any broken glassware can cause serious injury.
All glassware should be properly inspected and tested
for cleanliness. Do not rely on a visual check alone.
Miele Company Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW, Tel (01235) 554455,
Fax (01235) 554477, Internet: http://www.miele.co.uk /
!
Alteration rights reserved / 1708
,
The water intake level must be increased for the
relevant reprocessing programmes.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
