Miele CVA4075 - Manual

Front view a Touch controls (lowest control "On/Off" button) b Display c Touch controls (lowest control "Clear" button) d Top lighting e Door grip f Hot water spout g Bottom lighting h Plastic drip tray i Metal drip tray j Coffee dispenser (height adjustable) k Froth dispenser (remov...

Interior view a Main switch b Cover for ground coffee funnel c Funnel for ground coffee d Grind control lever e Coffee bean container f Drip tray with no-spill grid for transport g Water tank (with water inlet valve) h Brew unit i Waste unit Guide to the machine 9

Touch controls Select a touch control with yourfingertip to use the machine. Display To select a menu, select the touchcontrol next to the respective menupoint. If more features can be selected underone menu point, the menu has threedots (e.g. "Settings..."). "more" / "back":...

Before using the coffee system forthe first time, clean the appliance.See "Cleaning and Care". Filling the water tank The beans and the water quality isimportant for a good espresso orcoffee. If the machine is plumbed to awater line and turned on, the water tankis automatically filled. Empty...

Filling the beans container Only fill espresso or coffee beans inthe beans container. Anything else -including ground coffee - willdamage the grinding unit.Caramelized or otherwisepre-treated beans or sugarcontaining beverages must not befilled into the appliance. It willdamage the coffee system. ^ ...

The lines must be rinsed dailybefore the first use. This will happenautomatically if "Rinse automatic" isset to "On" (see "Settings - RinseAutomatic") and the machine is cold.After heating, hot water runs out ofthe two spouts into the drip tray. If"Rinse automatic" wa...

Pre-warming cups All beverages should be made in awarm cup, to develop the aroma. Thesmaller the amount of coffee orespresso and the thicker the cups, themore important it is to pre-warm thecups. ^ Set the cup under the hot waterspout. + ESPRESSO HOT WATER ~ + COFFEE MILK FROTH ~ + CAPPUCCINO more ~...

Espresso and coffee madefrom ground coffee After filling the funnel with groundcoffee (see "Filling water, beans orground coffee - Filling ground coffee"),the display shows: i Did you fill ground coffee anddo you want to prepare it? + No Yes ~ ^ Select "Yes". Select "No" if n...

Cappuccino and milk froth When using for the first time or usingafter descaling The lines were completely drainedbefore the unit left the factory. They willalso be drained when the machine isdescaled. Before preparingcappuccino or froth, the lines must befilled with water. ^ Set a cup under the capp...

Cappuccino To prepare a cappuccino you need alarge ceramic or porcelain cup and asmall mug (supplied) of milk. The best milk froth is achieved withcold milk. Only one cup of cappuccino can beprepared at a time because of themilk frothing process. ^ Set the mug of milk under the intakehose and the cu...

The amount of ground coffeedetermines the strength of the coffeeand the quality of the crema. The amount of ground coffee can beadjusted in the main menu. See"Settings - Grind amount". To prevent machine damage adjustthe coffee grinder one notch at a time and let the beans grind before adjus...

The coffee system can be customizedto suit individual preferences. Language To show the displays in the desiredlanguage, select the language beforethe first use. Preheating + DESCALING + USER PROFILES: STANDARD + SETTINGS F ... ^ Select "Settings" from the main menuduring the pre-heating pha...

Clock + back SETTINGS F ... ~ + CARE ... + USER PROFILES ^ Select "Settings". SETTINGS + LANGUAGE F ... GRIND AMOUNT ... ~ + CLOCK PRE-BREWING ~ + TIMER ... more ~ ^ Select "Clock". Setting the time of day ^ Select "Enter Time". ^ Select "+" or "-" with the ri...

Timer Setting a timer + back SETTINGS F ... ~ + CARE ... + USER PROFILES ^ Select "Settings". SETTINGS + LANGUAGE F ... GRIND AMOUNT ... ~ + CLOCK PRE-BREWING ~ + TIMER ... more ~ ^ Select "Timer". ^ Select "Setting". Turn on at A specific time of day can be set to turnthe ma...

Activating a timer + back SETTINGS ~ + CARE ... + USER PROFILES ^ Select "Settings". SETTINGS + LANGUAGE F ... GRIND AMOUNT ... ~ + CLOCK PRE-BREWING ~ + TIMER ... more ~ ^ Select "Timer". The timer function "Turning on at" or"Turning off at" can be activated ordeacti...

Grind amount The grind amount can be set,depending on the coffee type, between0.2 ounces and 0.5 ounces(6 - 14 grams). The more the coffee isground the stronger the espresso,coffee or cappuccino will be. The crema is also influenced by thegrind amount. – If the crema has an even but white/yellow col...

Temperature Five temperatures are available foreach beverage, three for hot water.Maximum is the highest temperature,minimum the lowest. Not every coffee type allows hightemperatures. Some types react sosensitively that the crema cannot beproperly built. ^ Select the User profile, for which youwould...

Steam system The appliance has two heatingsystems. They allow for independentpreparation of froth/cappuccino orespresso/coffee. The second heatingsystem can be turned off to saveenergy during the heating phase e.g. iffroth is not prepared very often. When the steam system is turned offand froth or c...

Total no. coffees ^ Select "Total no. coffees" to check thenumber of previously dispensedespresso, coffee and cappuccino. After a few seconds the displayswitches back to the "Settings" menu ortouch "OK". System Lock The coffee system can be locked sothat it cannot be used by ...

Water hardness The hardness of the water used in thecoffee system must be determined andprogrammed into the appliance. Thewater hardness will determine howfrequently the unit must be descaled tomaintain the coffee system properly.The machine monitors the volume ofwater passing through it in conjunct...

Change name ^ If you would like to change a name,touch "Change name" and then thetouch control next to the name to bechanged. ^ Type in the name as described in"Creating a user profile" and select"OK". ^ Select "Clear" to go back to theprevious screen. Delete To delet...

Display The display contrast and brightnesscan be adjusted. ^ Select "Settings" and then select"more" three times. SETTINGS + back PLUMBED ... ~ + DISPLAY RESET ~ + TONE OPTIONS ^ Select "Display". ^ Select "Brightness" or "Contrast" andthen the setting. The h...

Plumbed This unit is designed for operation witha permanent tap water connection butcan be converted from water line towater tank use. To do that the plumbedwater line connection can be turned onor off. When the unit is set to on, it usesthe water line. The water tank isautomatically filled. When th...

The flavor of the coffee depends on thecoffee and quantity of water used. Toensure the machine uses exactly theamount of water to suit your taste andyour cups, there is a choice of twoserving sizes for espresso/coffee. Thefill height can be programmed. Espresso serving size approx. 30 - 125 ml. Coff...

Allow the coffee system to coolbefore cleaning. Danger of burns! Do not clean the unit with a steamcleaner. Never use cleanerscontaining chlorides, sand, soda orscouring agents. These will damagethe surface. To avoid mold of coffee waste, cleanthe unit regularly. All parts can be cleaned in thedishw...

Water tank If the unit is not plumbed, empty thewater tank daily and refill beforepreparing the first drink with fresh, coldtap water. Check if the valve is clean. If thevalve has residues on it, the watertank will not connect properly andmight leak. ^ Clean the niche of the water tank. ^ Remove the...

Drip tray The trip tray contains a sensor whichcauses the display to show when thetray is full and needs to be emptied.Clean the drip tray daily . Remove the drip tray after the finalrinse when no more water runs fromthe lines. ^ Open the door and pull the drip trayout. The drip tray contains a grid...

Drip catch with metal insert ^ Take out and clean the drip catchand metal plate. Bean container The bean container must be cleaned by hand with hot water and liquid dish soap. ^ Pull the bean container out and pushthe lid back. ^ Wash the bean container by handwith hot water and liquid dish soap,the...

Coffee dispenser connector A connector between the brew unit andcoffee dispenser is located on the innerdoor. ^ Gently clean the connector regularlywith a damp cloth without removingthe lubricant for the gasket. ^ Lubricate the gasket once a monthwith the supplied silicone grease. Interior and door ...

Brew unit Manually clean the brew unitmonthly. The movable parts arelubricated and the gaskets will getdamaged in the dishwasher. ^ Take out the water tank, waste unitand the cover for the ground coffeefunnel. ^ Press the light colored button on thebrew unit handle, a , and turn the handle to the le...

Cleaning/Degreasing the brew unit Depending on the fat content of thecoffee, the brew unit can clog. Cleanthe brew unit approx. every 200 cupswith the enclosed detergent tablets.They are specially developed for thecoffee maker to optimize thedegreasing. The cleaning tablets canbe purchased from Miel...

Froth dispenser/Intake hose Clean the froth dispenser after eachuse, otherwise they may becomeblocked with dried milk and hard toclean. Rinsing does not replace cleaning inthe dishwasher. ^ Select "Care". ^ Select "System rinse". ^ Set a glass with water under theintake hose and sele...

^ Reassemble the parts as shown.Take care that the raised parts (seearrow) point downwards and, ^ that the marks are lined up. ^ Push the froth dispenser into themachine from underneath, a , and turn the cover above the spout to theright, b . Do not use the machine without thefroth dispenser install...

Exterior The front of the appliance can becleaned with a sponge and a solution ofwarm water and non abrasive liquiddish soap. Dry with a soft cloth. Only use a slightly damp spongewhen cleaning the controls. Watercould penetrate into the electronicsand cause damage. Abrasive cleaning agents, glasscl...

The coffee system must be descaledregularly. The appliance will display areminder message to descale and willeventually lock if not descaled. The display will show "Please descalethe coffee system. Remaining numbersof servings: 50". This message will nowappear after each preparation. If thec...

Repairs to electrical appliances should only be carried out by a suitablyqualified person in accordance with local and national safety regulations.Repairs and other work by unqualified persons could be dangerous. Themanufacturer cannot be held responsible for unauthorized work. Machine Problems The ...

Preparing / dispensing problems No water, steam or milk is dispensed from the froth dispenser. – The water tank is not correctly inserted. – The dispenser is clogged. – Take out the water tank and reinsert it. – Clean the froth dispenser as described in "Cleaning and Care - Frothdispenser/Intake...

The machine does not rinse when turned on although the automatic rinsefeature is set to "On". When the machine is still at a temperature of about 140°F (60°C). The machinewill not rinse when it's too hot. The water dispensing stops when programming the serving size. – There was not enough wa...

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe contact information on the back ofthis booklet. When contacting the Technical ServiceDepartment, please quote the modeland serial number of your appliancegiven on the data plate in...

Disposal of packing material The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable.Please recycle. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of children.Danger of suffo...

The machine must be connected tothe water supply in accordance withlocal and national regulations.The water being used should havethe drinking water standards of therespective country where themachine is used. – All units and systems used to deliver the water to the coffee system mustconform with th...

Ensure that power is not supplied tothe machine while installation ormaintenance work is performed. All electrical work should beperformed by a qualified electricianin strict accordance with nationaland local safety regulations.Installation, repairs and other workby unqualified persons could bedange...

Installation options The coffee system is designed to be built into cabinetry. A combination with other Miele built in appliances is possible. If the machine isinstalled in combination with other appliances, it should be installed with aprotective base between the appliance and the unit (exception: ...

Installation Make sure power is not supplied tothe appliance while installation ormaintenance work is performed.Disconnect the power supply to thework area by unplugging the unit,tripping the circuit breaker orremoving the fuse. The coffeesystem must be installed intocabinetry before being used. ^ U...

Adjusting the door hinges The door hinges can be adjusted if thedoor cannot be opened easily. ^ To adjust the door sideways, a , turn screw a . ^ To adjust the door to the front orback, b , turn screw b . Installation 61