Miele 11503040 - User Manual

IMPORTANT SAFETY INSTRUCTIONS 7 Appropriate use  This appliance is intended for use in domestic households and similar residential environments such as– staff kitchen areas in shops, offices and other working environ-ments– farm houses and by clients in hotels, motels and other residentialtype envi...

IMPORTANT SAFETY INSTRUCTIONS 8 Safety with children  To reduce the risk of injury, do not allow children to play in, on or near the appliance.  Risk of death. Please bear in mind that by removing the dividing panel in the large freezer basket, children may be tempted to climbinside.  The door hi...

IMPORTANT SAFETY INSTRUCTIONS 9 Technical safety  The coolant circuit has been checked for leaks. The refrigeration appliance complies with statutory and regulatory requirements.  This refrigeration appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. ...

IMPORTANT SAFETY INSTRUCTIONS 12 Correct use  The refrigeration appliance is designed for use within a specific climate class (room temperature range). Do not use in a climate classfor which it is not designed. A lower room temperature will cause thecompressor to switch off for longer periods, mean...

IMPORTANT SAFETY INSTRUCTIONS 13  Risk of injury. Do not take ice cubes out with your bare hands and never place ice cubes or ice pops in your mouth straight from thefreezer section. The very low temperature of the frozen food cancause frost burn to the lips and tongue.  Do not refreeze partially ...

IMPORTANT SAFETY INSTRUCTIONS 14 Cleaning and maintenance  Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time.  Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a shortcircuit.  Sharp edged or ...

IMPORTANT SAFETY INSTRUCTIONS 15 Disposal of your old appliance  Children could become trapped in the machine and could suffo- cate. - Remove the machine doors. - Remove the drawers. - Leave the adjustable shelves in the machine so children cannot climb inside.  DANGER of electric shock! - Cut the...

Caring for the environment 16 Disposal of packaging material The packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled. Ensure that any plastic wrapp...

Installation *INSTALLATION* 17 Installation location This appliance should be installed in adry, well-ventilated room. When deciding where to install your re-frigeration appliance, please bear inmind that it will use more energy if in-stalled near to a heater, a range, or an-other appliance that giv...

Installation *INSTALLATION* 18  Risk of damage due to high hu- midity.In environments with high humidity,condensation can build up on exter-nal refrigeration appliance panels,which can cause corrosion.Install the refrigeration appliance in adry and/or air-conditioned room withsufficient ventilation...

Installation *INSTALLATION* 19 Load-bearing capacity of the nichefloor To ensure the safe installation of the re-frigeration appliance and to guaranteeits correct functioning, the floor of theniche where the appliance is to be in-stalled must be smooth and even. It must be made from strong, rigid ma...

Installation *INSTALLATION* 20 Side-by-side This appliance can be installed side-by-side with another refrigeration appli-ance. The following overview will showyou which side-by-side options youhave with your appliance: A side-by-side merging kit and a topframe (KTF) are required for this. Bothare a...

Installation *INSTALLATION* 22 Installation dimensions Position of the electrical and plumbed water connections - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. - The 1/4" (6 mm) plumbed water connection should not be positioned higher than 2" (...

Installation *INSTALLATION* 25 Dimensions with appliance doors open (opening angle 90°/115°) 3/8" (9.5 mm) 9 1/4" (234 mm) A B 20 7/8" (530 mm) A B Cabinet front Door handle

Installation *INSTALLATION* 26 Building in the appliance Before starting... It is essential to read these installa-tion instructions carefully beforestarting to install the appliance.The appliance should be installed bya suitably qualified tradesman in ac-cordance with these installation in-structio...

Installation *INSTALLATION* 27 Aligning the installation niche The building-in niche must be carefullyaligned using a spirit level before the re-frigeration appliance is installed. Theniche corners must be at 90° angles toeach other, otherwise the cabinet frontwill not sit straight on all 4 corners ...

Installation *INSTALLATION* 28 Before installation  Before installation, remove any ac-cessories from the back of the appli-ance.  Check the refrigeration appliance fordamage during transportation. Do not install a damaged appliance.  Check that all parts at the back of theappliance are unhindere...

Installation *INSTALLATION* 29 Preparing the installation niche  Risk of damage and injury due to the refrigeration appliance tippingover.This refrigeration appliance is veryheavy and can tip forwards when thedoors are open.The installation niche must be se-cured to the wall behind it and/orabove i...

Installation *INSTALLATION* 31 2 Securing with a wooden wedge  Secure the installation niche to thewall behind it and/or above it as re-quired using the anti-tip brackets   .  Now prepare the plumbed water con-nection for the refrigeration appliance(see “Plumbed water connection”). Pushing the ap...

Installation *INSTALLATION* 33 Aligning the refrigeration appliance  Align the appliance with neighboringcabinet fronts as described below. The adjustable feet at the front andback of the appliance can all be ad-justed from the front of the appliance.  Risk of damage due to incorrect feet adjustme...

Installation *INSTALLATION* 34  Adjust the rear feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver   .  Adjust the front feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver   . Tip: Proceed carefully when adjusting the feet, alternating between the leftand ri...

Installation *INSTALLATION* 35  Risk of damage if the feet are adjusted too much.The rear adjustable feet can be dam-aged.Unscrew the feet only until the marking on the toe-kick is aligned toa maximum of 2 7/16" (62 mm) (max.niche height of 85 3/16" (2,164 mm)).  Use a level to check the a...

Installation *INSTALLATION* 36  Slide the cover onto the lower appli-ance door from the inside. Securing the toe-kick board andcover  Remove the film from the adhesivestrips on the toe-kick cover pro-vided   .  Secure the toe-kick cover   to the toe-kick board   .  Click the toe-kick board  ...

Installation *INSTALLATION* 37 Aligning the appliance doors After installation, align the appliancedoors with adjacent cabinet fronts. To do this, check the gaps to the adja-cent cabinet fronts.  If necessary, use the spacers pro-vided   and place them at the top of the appliance doors on both sid...

Installation *INSTALLATION* 40 Limiting the opening angle of the ap-pliance door The door hinges are set ex works to en-able the appliance door to be openedwide. If, for example, the appliance door hitsan adjacent wall when it is opened, youshould limit the opening angle of theappliance door to 90°:...

Installation *INSTALLATION* 41 Water connection Information on the fresh water con-nection  Risk of injury and appliance damage if appliance is not con-nected properly.Failing to connect the applianceproperly can result in personal injuryand/or material damage.The appliance may only be con-nected t...

Installation *INSTALLATION* 43 Electrical connection  Risk of electric shock! The appliance must only be switchedon when it has been installed in ac-cordance with the installation in-structions.Ground the appliance.The appliance must not be groundedvia a gas pipe.If in doubt, have a suitably qualif...

Installation *INSTALLATION* 44 If the outlet is no longer accessible afterinstallation, an additional means of dis-connection must be provided for allpoles. Suitable means of disconnectioninclude switches with an all-pole dis-connect device with a contact openingof at least 1/8" (3 mm). These ca...

Saving energy 45 Normal energy consumption Increased energy consumption Installation /Maintenance In a well-ventilated room. In an enclosed, poorly venti-lated room. Protected from direct sun-light. In direct sunlight. Away from heat sources (ra-diator, range/oven). Near a heat source (radiator,oven...

Saving energy 46 Normal energy consumption Increased energy consumption Use The drawers, and shelvesare arranged as they werewhen the appliance was de-livered. Only open the door whennecessary and for as short atime as possible. Store foodin an organized way. Frequent opening of thedoor for long per...

Guide to the appliance 47 a Automatic door opening (Push2open/Pull2open) b Display c On/Off switch d Interior lighting e Shelves f Holder for the Active AirClean filter g Door shelves in the appliance door h Hanging drawer for storing small food items

Guide to the appliance 48 i Door pillar with integrated heating (Condensation Protection) j Humidity-controlled compartment with moisture regulator for fruit and vegeta-bles k Dry compartment with low temperature for food which goes off quickly l Ice maker m Freezer baskets n Ice-cube container o Wa...

Guide to the appliance 49 Main screen °F 39      1 2 3 4 5 0 °F 6  7 a Automatic SuperCool display(only visible when the Automatic SuperCool function has been switched on) b Temperature display (target temperature) for the refrigerator section c Sensor control   for setting the temperature d ...

Guide to the appliance 50 Settings mode   In Settings mode, you can select the following appliance functions and alter theirsettings to some extent: Symbol Function  Language Set  Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright)  /  Buzzer Tones Adjust the volume...

Guide to the appliance 51  Vacation Switch on or off(see “Selecting additional settings”)  Dispenser Unit Switching the ice maker on and off (see “Making ice cubes”)  Sabbath Mode Switch on or off (see “Selecting additional settings”)  Water Filter Display Switch on or off or reset (see “Selecti...

Accessories 52 Accessories supplied Appliance plug Active AirClean filters The Active AirClean filters neutralize un-pleasant odors in the refrigerator sec-tion and stop odors from being trans-ferred to the food. Insert the supplied Active AirClean fil-ters as described under “Cleaning andcare – Rep...

Before first use 54 Before first use Allow the appliance to stand for ap-prox. 1 hour prior to connecting it tothe power supply.This will help prevent any malfunc-tions. Packaging material  Remove all packaging material fromthe inside of the appliance. Leftover tape residue.Always remove all packag...

Before first use 55 Inserting the Active AirClean filters Your refrigeration appliance is equippedwith 2 Active AirClean filters which neu-tralize unpleasant odors in the refrigera-tor section.  Insert the Active AirClean filters sup-plied as described under “Cleaningand care – Replacing the Active...

Before first use 56 Operating the refrigeration ap-pliance The touch display can be scratchedby pointed or sharp objects, e.g.,pens.Only touch the display with your fin-gers. If your fingers are cold, the touchdisplay may not react. °F 39    °F 39      0 °F  The sensor controls underneath t...

Before first use 57 Starting up for the first time  Open the appliance door.  Turn the refrigeration appliance on bypressing the On/Off switch. The On/Off switch is located belowthe display. The refrigeration appliance will start tocool and the interior lighting will comeon when the appliance door...

Switching on and off 58 Switching on the appliance  Open the appliance door.  Turn the refrigeration appliance on bypressing the On/Off switch. The refrigeration appliance will start tocool and the interior lighting will comeon when the appliance door is opened. Miele will appear, followed by the ...

Switching on and off 59 Switching off for longer peri-ods of time If the appliance is not going to be usedfor a longer period of time:  Turn the appliance off.  Unplug the appliance or switch offthe breaker.  Risk of damage due to frozen water intake pipe.If the water intake is blocked whilethe i...

Selecting additional settings 60 In settings mode   , certain settings can be adjusted and functions selected,allowing you to adjust the machine tosuit your requirements. The following section only describe thefunctions in settings mode  that re- quire further explanation. The door alarm and other...

Selecting additional settings 61 Switching Eco Mode  on or off Eco Mode is useful when you are going on vacation, for example, and you donot wish to switch off the appliancecompletely or do not need a high de-gree of cooling. Energy consumption in Eco Mode is lower than in normal opera- tion. The f...

Selecting additional settings 62 Performing a Self Test    Perform a Self Test if you are concerned that your refrigeration appliance is notworking properly and want to check if itis suffering from any problems.  In Settings mode   , use the   and   sensor controls to select Self Test and selec...

Selecting additional settings 63 Switching Condensation Pro- tection  on and off The door pillar of the upper left appli-ance door (see “Product description”)features integrated heating. Switch the heating on if you notice con-densation on the door pillar betweenthe fridge zone doors or on the door...

Selecting additional settings 64 Please note that the Door Assistantcan only be used to control the right Fridge Zone door. If the Push2Open  function is activated in the case of a handle-free cabinetfront, the right Fridge Zone door mustbe opened first before the left FridgeZone door can be opened....

Selecting additional settings 65 – Adjusting the duration of the Auto-Close function You can also adjust the duration forhow long the appliance door will remainopen until it closes automatically.  In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to co...

Selecting additional settings 66 Miele@home Setting up Miele@home The message Set up Miele@home only appears if the refrigeration appliancehas not yet been connected to a WiFinetwork.  Connect your refrigeration applianceas described in “Before using for thefirst time”. Deactivating Miele@home  In...

Selecting additional settings 67 Setting up Miele@home again If you have changed your WiFi network,you can set up Miele@home again foryour appliance.  In Settings mode   , use the   and   sensor controls to select Miele@home and select OK to confirm your selection.  Use the   and   sensor con...

Selecting additional settings 68 Resetting the settings to their default settings   You can reset the refrigeration appliance‘s settings to their default settings. Reset the refrigeration appliance’s settings to the default settings when disposingof your refrigeration appliance, selling it, or putt...

Selecting additional settings 69 The refrigeration appliance‘s settings will be reset to the following values: Function Default settings  Language English  Display Brightness Average value (4 of 7 segments) Color Scheme Dark  /  Buzzer Tones Average value (4 of 7 segments) / Keypad Tone Average ...

Selecting additional settings 70 Switching Vacation mode  on or off Vacation is useful when going on vaca- tion, for example, if you do not wish toswitch off the fridge zone completely ordo not need a high degree of cooling. Food which does not spoil quickly canbe stored in the appliance for someti...

Selecting additional settings 71 Switching Vacation mode   on  In Settings mode  , use the  and  sensor controls to select the Vaca- tion and select OK to confirm your se- lection.  Use the  and  sensor controls to select On and select OK to confirm your selection. 14°C (57°F) is now display...

Selecting additional settings 72 - SuperFrost function (if previously switched on) - Ice Maker (if previously switched on) You can still select: - the sensor control for Settings mode   so that Sabbath Mode can be switched off The Sabbath Mode function will switch it- self off automatically after a...

Selecting additional settings 73 Switching on the Water Filter Display  If the Water Filter Display has been switched off once, it must be switchedon again if required.  In Settings mode  , use the  and  sensor controls to select the Water Filter Display and select OK to confirm your selection....

Selecting additional settings 74 Switching on, switching off, orresetting the Display Active AirClean Filter    The Display Active AirClean Filter will re- mind you approx. every 6 months thatthe Active AirClean filters have to be re-placed. Change Active AirClean Filter will appear on the display....

Selecting additional settings 75 Resetting the Display Active AirClean Filter    After you have replaced the Active Air-Clean filters, you must reset the Display Active AirClean Filter so that it can be dis- played again after 6 months. If you do not reset the display, it ap-pears again and again. ...

The correct temperature 76 It is very important to set the correcttemperature for storing food in the ap-pliance. Bacteria will cause food whichis not stored at the correct temperatureto deteriorate rapidly. Temperature influ-ences the growth rate of these bacteria.Reducing the temperature reduces t...

The correct temperature 77 ... in the Freezer Zone To freeze fresh food and to store frozenfood for a long time, a temperature of 0°F (-18°C) is required. At this tempera- ture the growth of bacteria is generallyhalted. As soon as the temperaturerises above 14°F (-10°C), the bacteriabecome active in...

Using Automatic SuperCool and SuperFreeze 78 Automatic SuperCool func-tion   The Automatic SuperCool function canbe used to rapidly reduce the tempera-ture in the refrigerator section to its low-est setting (depending on the roomtemperature). Automatic SuperCool is particularly rec-ommended for the...

Using Automatic SuperCool and SuperFreeze 79 SuperFrost function   For best results, turn on the SuperFrostfunction before putting fresh food intothe freezer. Fresh food will be frozen quickly, so thatthe nutritional value, vitamin content,appearance, and taste are maintained. Exceptions: - Placing...

Using Automatic SuperCool and SuperFreeze 80 Tip: To save energy, you should manu- ally switch off the SuperFrost functiononce the freezer reaches a constant temperature of 0°F (-18°C) or colder.Monitor the temperature in the freezerzone.

Temperature and door alarm 81 Your appliance is equipped with a warn-ing system to ensure that temperatureincreases in the freezer section do notgo unnoticed and also prevents energyfrom being wasted when a door is leftopen. Temperature alarm The Freezer temperature too high. Max. temperature °C mes...

Temperature and door alarm 82 Door alarm The alarm will sound if an appliancedoor is left open for more than 2 min-utes.The Close the door message also ap- pears on the display. As soon as the corresponding door isclosed, the alarm will stop and the mes-sage on the display will go out. Turning the d...

Adjusting the interior fittings 83 Removing or moving the doorshelves Only move or remove the doorshelves when they are empty.  Hold the shelf on the frame with bothhands and lift it slightly so that it canbe lifted with the catches on bothsides over the guide.  Remove the shelf or place it in the...

Adjusting the interior fittings 84 Removing the hanging drawer  Pull the hanging drawer straight outto lift it over the pull-out stops onboth sides.  To reinsert the hanging drawer, pushit straight into the guide. The hanging drawer can be moved tothe left or right if required. Moving the hanging ...

Adjusting the interior fittings 85 Removing compartments fromthe Fridge Zone  Pull the compartment out a little bit.  Using both hands, grasp the com-partment frame from below and pushthe compartment downwards so thatthe rear end disengages and lifts up-wards.  Pull the compartment forwards to re...

Adjusting the interior fittings 86 Removing the dividing panel (de-pending on the model) The dividing panel in the freezer basketcan be removed for cleaning: The dividing panel is secured to thefreezer basket with brackets.  Pull the freezer basket out as far as itwill go.  To release the brackets...

Storing food in the refrigerator section 87 Always observe USDA food safetyguidelines.  Risk of fire from electrical appli- ances.Operating electrical devices in theappliance can cause sparks to form.Do not operate any electrical devicesinside the appliance.  Risk of explosion due to flammable mix...

Storing food in the refrigerator section 88 Warmest area The warmest area in the refrigeratorsection is in the top section of the door.Use this for storing butter so that it re-mains spreadable and cheese so that itretains its flavor. Coldest area The coldest area in the fridge zone is di-rectly abo...

Storing food in the refrigerator section 89 Notes on buying food The freshness of the food when it is firstplaced in the appliance is the most im-portant factor for how long it staysfresh.Take into account the use-by date andthe correct storage temperature.Time out of the fridge, e.g., transportingf...

Storing food in the MasterFresh zone 90 MastertFresh zone The MastertFresh zone provides idealstorage conditions for fruit, vegetables,fish, meat, and dairy products. Foodstays fresh considerably longer whileretaining both flavor and vitamins. The MasterFresh zone comprises a hu-midity-controlled an...

Storing food in the MasterFresh zone 92 Dry compartment with low tempera-ture The temperature in the dry compart-ment is maintained at 30 to 37°F ( -1 to3°C). While lower than the temperaturein a standard fridge zone, this is the op-timum temperature range for storingfresh food which is not sensitiv...

Storing food in the MasterFresh zone 93 The following tips may help if you find that food you have stored does notkeep well (for example, the food wilts or becomes withered after only a shortstorage time):  Only place fresh food in the appliance as the initial condition of the food is cru-cial to m...

Freezing and storing food 94 Always observe USDA food safetyguidelines.  Risk of fire from electrical appli- ances.Operating electrical devices in theappliance can cause sparks to form.Do not operate any electrical devicesinside the appliance. Maximum freezing capacity To ensure that fresh food pla...

Freezing and storing food 95 Storing frozen food Never re-freeze partially or fully de-frosted food. Defrosted food mustonly be re-frozen after it has beencooked. When buying frozen food to store inyour freezer, make sure to check: - that the packaging is not damaged - the expiration date - the temp...

Freezing and storing food 96 - Placing hot food or drink in the freezer causes food that is alreadyfrozen to partially thaw and increasesenergy consumption. Allow hot foodand drink to cool down before plac-ing it in the freezer. Packaging food for freezing  Freeze food in portions. – Suitable packa...

Freezing and storing food 97 Placing food in the freezer Food to be frozen can be placed any-where in the freezer zone.Place large quantities of food in thelarge freezer basket.  Place the frozen food flat in the bot-tom of the basket so that it freezesthrough to the core as quickly as pos-sible. ...

Freezing and storing food 98 Defrosting frozen goods Never re-freeze partially or fully de-frosted food. Defrosted food may onlybe re-frozen after it has been cooked. Frozen food can be defrosted in differ-ent ways: - In a microwave - In an oven using “Convection” or the “Defrost” setting - At room ...

Making ice cubes 99 For the automatic ice cube maker tooperate, it must be connected to awater supply (see “Installation – Watersupply”).  Risk to health due to contami- nated water.Consuming polluted water can leadto illnesses.The first 3 batches of ice cubesmade after the ice cube maker isstarted...

Making ice cubes 100 Turning off the ice maker The ice maker can be turned off inde-pendently of the freezer zone if you donot want to make any ice cubes.  Close the faucet in the water supplyline (approx. 3 hours before switchingoff the appliance to avoid the build-up of bacteria caused by stagnan...

Automatic defrosting 101  WARNING! DANGER of injury and damage!Do not use any mechanical or othertypes of aids which are not recom-mended by the manufacturer to ac-celerate the defrosting process. Refrigerator section and Mas-terFresh drawer The refrigerator section and the Master-Fresh drawer defr...

Cleaning and care 102  WARNING! DANGER of electric shock!Unplug the appliance or trip the cir-cuit breaker.  WARNING! Fire hazard! Do not damage the coolantpipework. Do not let water get into the elec-tronic or the lighting.  Risk of damage due to moisture penetration.The steam from a steam clean...

Cleaning and care 103 Before cleaning the appliance  Turn the appliance off completely bypressing the On/Off switch.  Take any food out of the applianceand store it in a cool place.  Take out all other removable parts forcleaning (see “Adjusting the interiorfittings”). Interior and accessories Cl...

Cleaning and care 104 Appliance front The appliance front has a special high-quality finish (Clean Touch Steel). This isresistant to soiling and is very easy toclean.  Do not use stainless steel cleaning agent on these surfaces, as it will damage the finish. Do not use Miele stainless steelconditio...

Cleaning and care 105 Cleaning the water filter (Inten-siveClear 2.0 mesh filter) (see“Optional accessories”) Depending on the quantity of ice cubesproduced, the IntensiveClear 2.0 meshfilter must be cleaned approx. every6 months. You can use the Replace the water filter display on the display as a ...

Cleaning and care 107 The holder can be fixed under anyshelf in the refrigerator section. Once the Active AirClean filters havebeen replaced, the Active AirClean filterdisplay   must be reset using Settings mode   on the display (see “Selecting additional settings – Resetting the Dis- play Active ...

Water filter 108 The appliance is supplied with a waterfilter (IntensiveClear 2.0 charcoal filter)that filters supply water for making icecubes. The IntensiveClear 2.0 charcoal filterimproves the taste and smell of the icecubes by removing chlorine and othersubstances from supply water. However, to ...

Water filter 109 Changing the water filter Air in the system can cause water togush out and the filter cartridge tospring out when it is removed. Takegreat care when changing the waterfilter. 1 . 2 .  Turn the cap of the filter cartridgecounterclockwise until it is in the ver-tical position 1. and ...

Water filter 110 Once the IntensiveClear 2.0 charcoal fil-ter has been replaced, the water filterdisplay  must be reset using Settings mode   on the display (see “Selecting additional settings – Resetting the Water Filter Display    ”). After inserting a new water filter, dis-pose of all ice cube...

Water filter 113 Lead-free certificate This product F 1413 Vi (KIMSDF18US) is tested and certified by WQA againstNSF/ANSI 372 for "lead free" compliance. Miele & Cie. KGCarl-Miele-Straße 29D-33332 Gütersloh Lead free certificate 35 This product is tested and certified by WQA against NSF/...

Frequently Asked Questions 114 With the help of the following guide minor faults in the performance of the ma-chine, some of which may result from incorrect operation, can be remedied with-out contacting the Service Department. This guide may help you to find the reason for the fault, and how to cor...

Frequently Asked Questions 118 Problem Possible cause and solution The left Fridge Zonedoor and the door pillfeel warm. Not a fault. The left-hand appliance door features in-tegrated heating. Switching the heating on preventscondensation on the door pillar and on the doorseals.  If required, you ca...

Frequently Asked Questions 119 Messages in the display Message Possible cause and solution The warning soundsand the message Freezer temperature too high. Max.temperature °C appears on the display. The temperature in the appliance has risen signifi-cantly.This could be due to, for example: – the app...

Frequently Asked Questions 120 Message Possible cause and solution “ F Please contact Miele Technical Service. ” ap- pears in the display andan alarm sounds. There is a fault.  Make a note of the fault message if necessary.  Contact Miele Service.  To turn the alarm off, touch the   symbol. The ...

Frequently Asked Questions 121 Problems with the ice cube maker Problem Possible cause and solution The ice maker is notproducing any icecubes. The refrigeration appliance and the ice maker are notswitched on.  Switch the refrigeration appliance and the icemaker on.  Check whether the water filter...

Frequently Asked Questions 124 The interior lighting is not working. Problem Possible cause and solution The interior lighting isnot working. The refrigeration appliance has not been turned on.  Turn the refrigeration appliance on. The Sabbath Mode  function is switched on: the tem- perature displa...

Causes of noises 125 Normalnoises Cause Brrrrr... A humming noise is made by the motor (compressor). This noisecan get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulatesthrough the pipes. Click... Clicking sounds occur wheneve...

Customer Service 126 Contact in the event of a fault In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Customer Service. You can book a Miele Service Call on-line at www.miele.com/service. Contact information for Miele Cus-tomer Service can be found at...

Declaration of conformity 127 Frequency range 2.412 GHz –2.462 GHz Maximum trans-mitting power < 100 mW

Copyrights and licenses 128 Miele uses their own and third party software which is not subject to any so-calledopen source license for the operation and control of the device/appliance. Thissoftware/these software components are protected by copyright. The copyrightpowers of Miele and third parties ...

9 Independence WayPrinceton, NJ 08540 U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Customer Service. Canada ImporterMiele Limited Headquarters and Miele Centre Customer Service & Support Phone: 888-99-MIELE(64353)[emai...