Miele 11502840 - User Manual

IMPORTANT SAFETY INSTRUCTIONS 7 Safety with children  To reduce the risk of injury, do not allow children to play in, on or near the appliance.  The door hinges can cause injury. Keep children well away at all times.  Ensure that any packing material is disposed of safely and kept out of the reac...

IMPORTANT SAFETY INSTRUCTIONS 10 Correct use  The refrigeration appliance is designed for use within a specific climate class (room temperature range). Do not use in a climate classfor which it is not designed. A lower room temperature will cause thecompressor to switch off for longer periods, mean...

IMPORTANT SAFETY INSTRUCTIONS 11 Stainless steel machines:  Adhesives will damage the coated stainless steel surface and cause it to lose its dirt-repellent protective coating. Do not use stickynotes, transparent adhesive tape, masking tape, or other types ofadhesive on the stainless steel surface....

IMPORTANT SAFETY INSTRUCTIONS 12 Cleaning and maintenance  Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time.  Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a shortcircuit.  Sharp edged or ...

IMPORTANT SAFETY INSTRUCTIONS 13 Disposal of your old appliance  Children could become trapped in the machine and could suffo- cate. - Remove the machine doors. - Remove the drawers. - Leave the adjustable shelves in the machine so children cannot climb inside.  DANGER of electric shock! - Cut the...

Caring for the environment 14 Disposal of packaging material The packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled. Ensure that any plastic wrapp...

Installation *INSTALLATION* 15 Installation location This appliance should be installed in adry, well-ventilated room. When deciding where to install your re-frigeration appliance, please bear inmind that it will use more energy if in-stalled near to a heater, a range, or an-other appliance that giv...

Installation *INSTALLATION* 16  Risk of damage due to high hu- midity.In environments with high humidity,condensation can build up on exter-nal refrigeration appliance panels,which can cause corrosion.Install the refrigeration appliance in adry and/or air-conditioned room withsufficient ventilation...

Installation *INSTALLATION* 17 Load-bearing capacity of the nichefloor To ensure the safe installation of the re-frigeration appliance and to guaranteeits correct functioning, the floor of theniche where the appliance is to be in-stalled must be smooth and even. It must be made from strong, rigid ma...

Installation *INSTALLATION* 18 Side-by-side This appliance can be installed side-by-side with another refrigeration appli-ance. The following overview will showyou which side-by-side options youhave with your appliance: A side-by-side merging kit and a topframe (KTF) are required for this. Bothare a...

Installation *INSTALLATION* 20 Installation dimensions Position of the electrical connection - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. The electrical socket must not be concealed behind the appliance and must beeasily accessible in an emergency.

Installation *INSTALLATION* 23 Dimensions when the appliance door is open (opening angle 90°/115°) 3/8" (10 mm) A D B C A B C D K 26x2 SF 26 5/8" (677 mm) Cabinet front Door handle 11 5/8" (296 mm) K 28x2 SF 32 5/8" (829 mm) Cabinet front Door handle 14 5/16" (363 mm) K 29x2 SF 3...

Installation *INSTALLATION* 24 Building in the appliance Before starting... It is essential to read these installa-tion instructions carefully beforestarting to install the appliance.The appliance should be installed bya suitably qualified tradesman in ac-cordance with these installation in-structio...

Installation *INSTALLATION* 25 Aligning the installation niche The building-in niche must be carefullyaligned using a spirit level before the re-frigeration appliance is installed. Theniche corners must be at 90° angles toeach other, otherwise the cabinet frontwill not sit straight on all 4 corners ...

Installation *INSTALLATION* 26 Before installation  Before installation, remove any ac-cessories from the back of the appli-ance.  Check the refrigeration appliance fordamage during transportation. Do not install a damaged appliance.  Check that all parts at the back of theappliance are unhindere...

Installation *INSTALLATION* 27 Preparing the installation niche  Risk of damage and injury due to the refrigeration appliance tippingover.This refrigeration appliance is veryheavy and can tip forwards when thedoors are open.The installation niche must be se-cured to the wall behind it and/orabove i...

Installation *INSTALLATION* 29 2 Securing with a wooden wedge  Secure the installation niche to thewall behind it and/or above it as re-quired using the anti-tip brackets   . Pushing the appliance into the niche Then push the appliance into theniche, taking care not to damage theelectrical connect...

Installation *INSTALLATION* 31 Aligning the refrigeration appliance  Align the appliance with neighboringcabinet fronts as described below. The adjustable feet at the front andback of the appliance can all be ad-justed from the front of the appliance.  Risk of damage due to incorrect feet adjustme...

Installation *INSTALLATION* 32  Adjust the rear feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver   .  Adjust the front feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver   . Tip: Proceed carefully when adjusting the feet, alternating between the leftand ri...

Installation *INSTALLATION* 33  Risk of damage if the feet are adjusted too much.The rear adjustable feet can be dam-aged.Unscrew the feet only until the marking on the toe-kick is aligned toa maximum of 2 7/16" (62 mm) (max.niche height of 85 3/16" (2,164 mm)).  Use a level to check the a...

Installation *INSTALLATION* 34 Securing the toe-kick board andcover  Remove the film from the adhesivestrips on the toe-kick cover provided  .  Secure the toe-kick cover  to the toe-kick board  .  Click the toe-kick board  onto the bottom of the appliance toe-kick. Aligning the appliance door...

Installation *INSTALLATION* 37  Place the covers provided   on the fixing brackets.  Remove the spacers   from the ap- pliance door. Limiting the opening angle of the ap-pliance door The door hinges are set ex works to en-able the appliance door to be openedwide. If, for example, the appliance d...

Installation *INSTALLATION* 38 Electrical connection  Risk of electric shock! The appliance must only be switchedon when it has been installed in ac-cordance with the installation in-structions.Ground the appliance.The appliance must not be groundedvia a gas pipe.If in doubt, have a suitably qualif...

Installation *INSTALLATION* 39 If the outlet is no longer accessible afterinstallation, an additional means of dis-connection must be provided for allpoles. Suitable means of disconnectioninclude switches with an all-pole dis-connect device with a contact openingof at least 1/8" (3 mm). These ca...

Saving energy 40 Normal energy consumption Increased energy consumption Installation /Maintenance In a well-ventilated room. In an enclosed, poorly venti-lated room. Protected from direct sun-light. In direct sunlight. Away from heat sources (ra-diator, range/oven). Near a heat source (radiator,oven...

Saving energy 41 Normal energy consumption Increased energy consumption Use The drawers, and shelvesare arranged as they werewhen the appliance was de-livered. Only open the door whennecessary and for as short atime as possible. Store foodin an organized way. Frequent opening of thedoor for long per...

Guide to the appliance 42 a Display b On/Off switch c Door shelves in the appliance door d Holder for the Active AirClean filter e Shelves f Hanging drawer for storing small food items g Interior lighting h Fruit and vegetable drawer i Moisture regulator j Humidity-controlled compartment with moistu...

Guide to the appliance 44 Main screen °F 39      1 2 3 4 5 a Automatic SuperCool display(only visible when the Automatic SuperCool function has been switched on) b Temperature display (target temperature) c Sensor control   for setting the temperature d Display for Miele@home connection status...

Guide to the appliance 45 Settings mode   In Settings mode, you can select the following appliance functions and alter theirsettings to some extent: Symbol Function  Language Set  Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright)  /  Buzzer Tones Adjust the volume...

Guide to the appliance 46  * Demo Mode Switch off * (only visible when Demo Mode , is switched on see “Selecting additional settings”)  Factory Default Reset to default settings (see “Selecting additional settings”)  Sabbath Mode Switch on or off (see “Selecting additional settings”)  Display Ac...

Accessories 47 Accessories supplied Appliance plug Active AirClean filters The Active AirClean filters neutralize un-pleasant odors in the refrigerator sec-tion and stop odors from being trans-ferred to the food. Insert the supplied Active AirClean fil-ters as described under “Cleaning andcare – Rep...

Before first use 48 Before first use Allow the appliance to stand for ap-prox. 1 hour prior to connecting it tothe power supply.This will help prevent any malfunc-tions. Packaging material  Remove all packaging material fromthe inside of the appliance. Leftover tape residue.Always remove all packag...

Before first use 49 Inserting the Active AirClean filters Your refrigeration appliance is equippedwith 2 Active AirClean filters which neu-tralize unpleasant odors in the refrigera-tor section.  Insert the Active AirClean filters sup-plied as described under “Cleaningand care – Replacing the Active...

Before first use 50 Settings mode   In Settings mode   , you can select different refrigeration appliance func-tions and alter their settings to someextent (see “Selecting additional set-tings”).  Touch the   sensor control to open Settings mode.  Use the  and   sensor controls to select the ...

Before first use 51  Use the   and   sensor controls to select the right setting and select OK to confirm your selection.  Touch the   sensor control if you want to return to the previous menulevel. Set-up Successful will appear on the dis- play.  Confirm the first use with OK . The main scree...

Switching on and off 52 Switching on the appliance  Open the appliance door.  Turn the refrigeration appliance on bypressing the On/Off switch. The refrigeration appliance will start tocool and the interior lighting will comeon when the appliance door is opened. Miele will appear, followed by the ...

Selecting additional settings 53 In settings mode   , certain settings can be adjusted and functions selected,allowing you to adjust the machine tosuit your requirements. The following section only describe thefunctions in settings mode  that re- quire further explanation. The door alarm and other...

Selecting additional settings 54 Adjusting the temperature inthe MasterFresh zone (drycompartment)    In Settings mode   , use the   and   sensor controls to select Master- Fresh and select OK to confirm your selection.  Use the   and   sensor controls to select the desired temperature andto...

Selecting additional settings 55 Performing a Self Test    Perform a Self Test if you are concerned that your refrigeration appliance is notworking properly and want to check if itis suffering from any problems.  In Settings mode   , use the   and   sensor controls to select Self Test and selec...

Selecting additional settings 56 Switching on the Door Assis- tant    You can choose between the two DoorAssistants Push2Open and Pull2Open . The default Door Assistant is Push2Open . The Push2Open Door Assistant is suit- able for cabinet fronts without handles.The door will then open automatically...

Selecting additional settings 57 – Adjusting the duration of the Auto-Close function You can also adjust the duration forhow long the appliance door will remainopen until it closes automatically.  In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to co...

Selecting additional settings 58 Switching off the Door Assis- tant     In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to confirm your selection.  Use the   and   sensor controls to select Mode and select OK to confirm your selection.  Use the ...

Selecting additional settings 59 Availability of the WiFi connection The WiFi connection shares a frequencyrange with other appliances (includingmicrowave ovens and remote controltoys). This can cause sporadic or evencomplete connection failures. There-fore, the availability of featured func-tions c...

Selecting additional settings 61 Deactivating Miele@home  In Settings mode   , use the   and   sensor controls to select Miele@home and select OK to confirm your selection.  Use the   and   sensor controls to select Deactivate and select OK to confirm your selection. Deactivation successful w...

Selecting additional settings 62 Resetting the network configuration Reset the refrigeration appliance’s set-tings to the default settings when dis-posing of your refrigeration appliance,selling it, or putting a used refrigera-tion appliance into operation. This willreset the network configuration s...

Selecting additional settings 63 Resetting the settings to their default settings   You can reset the refrigeration appliance‘s settings to their default settings. Reset the refrigeration appliance’s settings to the default settings when disposingof your refrigeration appliance, selling it, or putt...

Selecting additional settings 64 The refrigeration appliance‘s settings will be reset to the following values: Function Default settings  Language English  Display Brightness Average value (4 of 7 segments) Color Scheme Dark  /  Buzzer Tones Average value (4 of 7 segments) / Keypad Tone Average ...

Selecting additional settings 65 Switching Sabbath Mode    on or off The refrigeration appliance has a Sab- bath Mode to support the observance of religious customs. When Sabbath Mode is switched on, you cannot make any settings on yourrefrigeration appliance. Ensure that the appliance door isprope...

Selecting additional settings 66 Switching on, switching off, orresetting the Display Active AirClean Filter    The Display Active AirClean Filter will re- mind you approx. every 6 months thatthe Active AirClean filters have to be re-placed. Change Active AirClean Filter will appear on the display....

Selecting additional settings 67 Resetting the Display Active AirClean Filter    After you have replaced the Active Air-Clean filters, you must reset the Display Active AirClean Filter so that it can be dis- played again after 6 months. If you do not reset the display, it ap-pears again and again. ...

The correct temperature 68 It is very important to set the correcttemperature for storing food in the ap-pliance. Bacteria will cause food whichis not stored at the correct temperatureto deteriorate rapidly. Temperature influ-ences the growth rate of these bacteria.Reducing the temperature reduces t...

The correct temperature 69 Setting the temperature  Touch the   sensor control to set the temperature. The previously set temperature will ap-pear.  Use the   and   sensor controls to set the temperature. Keeping your fin-ger on the sensor control changesthe temperature continuously.  Confirm ...

Using Automatic SuperCool 70 Automatic SuperCool func-tion   The Automatic SuperCool function canbe used to rapidly reduce the tempera-ture in the refrigerator section to its low-est setting (depending on the roomtemperature). Automatic SuperCool is particularly rec-ommended for the rapid chilling ...

Door alarm 71 The appliance is fitted with a warningsystem to avoid increased energy con-sumption if the door is left open. Door alarm An alarm will sound if the appliancedoor has been left open for longer thanapprox. 2 minutes.The Close the door message also ap- pears on the display. As soon as the...

Adjusting the interior fittings 72 Removing or moving the doorshelves Only move or remove the doorshelves when they are empty.  Hold the shelf on the frame with bothhands and lift it slightly so that it canbe lifted with the catches on bothsides over the guide.  Remove the shelf or place it in the...

Adjusting the interior fittings 73 Removing the hanging drawer  Pull the hanging drawer straight outto lift it over the pull-out stops onboth sides.  To reinsert the hanging drawer, pushit straight into the guide. The hanging drawer can be moved tothe left or right if required. Moving the hanging ...

Adjusting the interior fittings 74 Removing compartments fromthe Fridge Zone  Pull the compartment out a little bit.  Using both hands, grasp the com-partment frame from below and pushthe compartment downwards so thatthe rear end disengages and lifts up-wards.  Pull the compartment forwards to re...

Storing food in the refrigerator section 75 Always observe USDA food safetyguidelines.  Risk of fire from electrical appli- ances.Operating electrical devices in theappliance can cause sparks to form.Do not operate any electrical devicesinside the appliance.  Risk of explosion due to flammable mix...

Storing food in the refrigerator section 76 Warmest area The warmest area in the refrigeratorsection is in the top section of the door.Use this for storing butter so that it re-mains spreadable and cheese so that itretains its flavor. Coldest area The coldest area in the fridge zone is di-rectly abo...

Storing food in the refrigerator section 77 Notes on buying food The freshness of the food when it is firstplaced in the appliance is the most im-portant factor for how long it staysfresh.Take into account the use-by date andthe correct storage temperature.Time out of the fridge, e.g., transportingf...

Storing food in the MasterFresh zone 78 MastertFresh zone The MastertFresh zone provides idealstorage conditions for fruit, vegetables,fish, meat, and dairy products. Foodstays fresh considerably longer whileretaining both flavor and vitamins. The MasterFresh zone comprises a hu-midity-controlled an...

Storing food in the MasterFresh zone 80 Dry compartment with adjustabletemperature The temperature in the dry compart-ment is maintained at 30 to 37°F (-1 to3°C). While lower than the temperaturein a standard refrigerator section, this isthe optimum temperature range forstoring fresh food which is n...

Storing food in the MasterFresh zone 81 The following tips may help if you find that food you have stored does notkeep well (for example, the food wilts or becomes withered after only a shortstorage time):  Only place fresh food in the appliance as the initial condition of the food is cru-cial to m...

Automatic defrosting 82  WARNING! DANGER of injury and damage!Do not use any mechanical or othertypes of aids which are not recom-mended by the manufacturer to ac-celerate the defrosting process. Refrigerator section and Mas-terFresh drawer The refrigerator section and the Master-Fresh drawer defro...

Cleaning and care 83  WARNING! DANGER of electric shock!Unplug the appliance or trip the cir-cuit breaker.  WARNING! Fire hazard! Do not damage the coolantpipework. Do not let water get into the elec-tronic or the lighting.  Risk of damage due to moisture penetration.The steam from a steam cleane...

Cleaning and care 84 Before cleaning the appliance  Turn the appliance off completely bypressing the On/Off switch.  Take any food out of the applianceand store it in a cool place.  Take out all other removable parts forcleaning (see “Adjusting the interiorfittings”). Interior and accessories Cle...

Cleaning and care 85 Appliance front The appliance front has a special high-quality finish (Clean Touch Steel). This isresistant to soiling and is very easy toclean.  Do not use stainless steel cleaning agent on these surfaces, as it will damage the finish. Do not use Miele stainless steelcondition...

Cleaning and care 86 Replacing the Active AirCleanfilters The Active AirClean filters in the refrig-erator section need to be replaced ap-prox. every 6 months. Change Active AirClean Filter will appear on the display.  Confirm the message with OK .  To remove the holder for the ActiveAirClean filt...

Frequently Asked Questions 87 With the help of the following guide minor faults in the performance of the ma-chine, some of which may result from incorrect operation, can be remedied with-out contacting the Service Department. This guide may help you to find the reason for the fault, and how to corr...

Frequently Asked Questions 90 Messages in the display Message Possible cause and solution The warning soundsand the message Close the door appears on the display. The appliance door is open.  Close the appliance door.  If you wish to turn the alarm off early, touch thesensor control OK on the disp...

Frequently Asked Questions 91 The interior lighting is not working. Problem Possible cause and solution The interior lighting isnot working. The refrigeration appliance has not been turned on.  Turn the refrigeration appliance on. The Sabbath Mode  function is switched on: the tem- perature display...

Causes of noises 92 Normalnoises Cause Brrrrr... A humming noise is made by the motor (compressor). This noisecan get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulatesthrough the pipes. Click... Clicking sounds occur whenever...

Customer Service 93 Contact in the event of a fault In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Customer Service. You can book a Miele Service Call on-line at www.miele.com/service. Contact information for Miele Cus-tomer Service can be found at ...

Declaration of conformity 94 Frequency band 2.412 GHz –2.462 GHz Maximum trans-mitting power < 100 mW

Copyrights and licenses 95 Miele uses their own and third party software which is not subject to any so-calledopen source license for the operation and control of the device/appliance. Thissoftware/these software components are protected by copyright. The copyrightpowers of Miele and third parties h...

9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Customer Service. Canada ImporterMiele Limited Headquarters and Miele Centre 800-843-7231609-419-4298 Customer Se...