Page 2 - Contents
Contents 2 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 4 Caring for the environment ................................................................................ 13 Guide to the appliance ...........................................................
Page 3 - Installation
Contents 3 OdorFree Charcoal Filter ....................................................................................... 37 Resetting the filter saturation indicator for the charcoal filters......................... 38Disposing of charcoal filters ....................................................
Page 4 - IMPORTANT SAFETY INSTRUCTIONS; Appropriate use
IMPORTANT SAFETY INSTRUCTIONS 4 READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements.Improper use of the appliance can lead to personal injury andmaterial damage. Read all instructions before installing or using the appliance for thefirst time. Only use the appli...
Page 5 - Safety with children
IMPORTANT SAFETY INSTRUCTIONS 5 Safety with children As with any appliance, close supervision is necessary when used by children. Please supervise children in the vicinity of the hood and do not let them play with it. The LED ClearView lighting is very intense. Ensure that especially babies/sm...
Page 7 - Correct use
IMPORTANT SAFETY INSTRUCTIONS 7 During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is onlycompletely isolated from the electricity supply if one of the followingapplies: – The circuit breakers on the electrical service panel ...
Page 8 - – 1) You have a class ABC extinguisher, and you know how to operate it.
IMPORTANT SAFETY INSTRUCTIONS 8 – b) NEVER PICK UP A FLAMING PAN - You may be burned. – c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result. – d) Use a fire extinguisher ONLY if: – 1) You have a class ABC extinguisher, and you know how to operate it. – 2) ...
Page 9 - Please note that the heat rising from the stovetop during cooking
IMPORTANT SAFETY INSTRUCTIONS 9 Please note that the heat rising from the stovetop during cooking can cause the ventilation hood to become very hot.Do not touch the housing or the grease filters until the ventilationhood has cooled down.
Page 10 - Proper installation
IMPORTANT SAFETY INSTRUCTIONS 10 Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: – a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards,including fi...
Page 11 - Cleaning and maintenance
IMPORTANT SAFETY INSTRUCTIONS 11 Be sure to observe the information contained in the “Installation” section when mounting the ventilation hood. Metal parts can have sharp edges which may cause injury. Wear gloves to protect your hands from being cut. When installing the exhaust duct, only use ...
Page 12 - FCC Declaration of Conformity; These devices comply with FCC Rules Part 15. This equipment; FCC Radiation Exposure Statement; This equipment complies with FCC radiation exposure limits set; Industry Canada Statement; This digital apparatus does not exceed the Class B limits for
IMPORTANT SAFETY INSTRUCTIONS 12 FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules ofOperation and is subject to the following con...
Page 13 - Caring for the environment; Disposal of your old appliance
Caring for the environment 13 Disposal of the packingmaterial The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of childr...
Page 14 - Guide to the appliance
Page 16 - Description of functions; Extraction mode
Description of functions 16 The following functions are available onyour ventilation hood, depending on themodel: Extraction mode The air is drawn in and cleaned by thegrease filters and directed outside. Non-return flap A non-return flap in the ductingprevents the exchange of inside andoutside air ...
Page 17 - Before using for the first time; Setting up Miele@home
Before using for the first time 17 Selecting extraction mode orrecirculation mode The ventilation hood can be operatedwith either extraction mode orrecirculation mode. The power of theblower is adapted to suit the selectedmode of operation. The ventilationhood is set up at the factory forrecirculati...
Page 18 - Connecting via the app
Before using for the first time 18 Connecting via the app The Miele@mobile app can be used toconnect to your network. Install the Miele@mobile app on yourmobile device. To log in you will need: 1. Your WiFi network password 2. Your ventilation hood password The password for your ventilation hoodco...
Page 19 - Connecting via WPS
Before using for the first time 19 Connecting via WPS Your WiFi router must support WPS(WiFi Protected Setup). Switch the ventilation hood off. Press and hold the B control. Touch the lighting control at the same time. 2 will light up constantly, 3 will flash on and off. The WiFi connection...
Page 21 - Setting up Con@ctivity; – When a burner is turned on, the
Before using for the first time 21 Setting up Con@ctivity Con@ctivity is the direct communicationsystem between an induction Mielecooktop and a Miele ventilation hood. Itenables the ventilation hood to operateautomatically depending on theoperational state of a Miele cooktopwith onset controls. – Wh...
Page 22 - Activating the wireless connection
Before using for the first time 22 Installing the Con@ctivity 2.0 stick See the relevant installationinstructions provided with theCon@ctivity 2.0 stick. Activating the wireless connection The ventilation hood and the cooktopmust be installed and operational. The wireless connection must beactivat...
Page 23 - Activating the cooktop
Before using for the first time 23 Touch the B control to activate Con@ctivity 2.0. 2 will light up constantly, 3 will flash on and off. After a few seconds, 2 and 3 will light up constantly, B will flash on and off. The search for a wireless connectionwill start. Activating the cooktop While th...
Page 24 - Activation failed
Before using for the first time 24 Activation failed If a wireless connection cannot beestablished despite activation of theCon@ctivity function on the ventilationhood and cooktop, the function mustfirst be deactivated and thenreactivated on both appliances. Deactivating the wireless connection Th...
Page 25 - Reaction time
Operation (Automatic mode) 25 When Con@ctivity is active, theventilation hood always operates inAutomatic mode (see “Setting upCon@ctivity”). If you wish to manually operate theventilation hood, see “Cooking withoutCon@ctivity”. Cooking with Con@ctivity(Automatic mode) Turn on a burner to the desi...
Page 29 - Power management
Operation (Manual mode) 29 Dimming/switching theoverhead lighting on/off The overhead lighting can be switchedon and off and dimmed independentlyof the blower. Touch the lighting control briefly to switch it on or off. The lighting will switch on at maximumbrightness. With the lighting switch...
Page 30 - Turning power management on/off
Operation (Manual mode) 30 Turning power management on/off Switch off the blower and the lighting. Touch the delayed shutdown control for approx. 10 seconds, until 1 lights up in the power level display. Then touch in order: – the lighting control , – the 1 control, and then – the lightin...
Page 31 - Filter saturation indicator
Operation (Automatic and Manual modes) 31 Filter saturation indicator The ventilation hood registers the lengthof time it has been operated. The filter saturation indicators showwhen the filters need to be cleaned orchanged by lighting up the grease filtersymbol or charcoal filter symbol . Addit...
Page 34 - Cleaning and care; WARNING: TO REDUCE THE; Stainless steel housing; General information
Cleaning and care 34 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,OR INJURY TO PERSONS,OBSERVE THE FOLLOWING: Before cleaning or servicing thehood, disconnect it from the powersupply, see “IMPORTANT SAFETYINSTRUCTIONS”. Stainless steel housing General information The surfaces and contro...
Page 35 - Grease filters; Cleaning intervals
Cleaning and care 35 Grease filters Risk of fire! Oversaturated grease filters are a firehazard.Clean the grease filters at regularintervals. The reusable metal grease filters in theappliance remove the solid particlescontained in kitchen vapors (grease,dust, etc.), thereby preventing theventilati...
Page 36 - Unsuitable cleaning agents
Cleaning and care 36 Unsuitable cleaning agents Unsuitable cleaners can cause damageto the filter surfaces if used regularly.Do not use any of the following: – Lime removers – Abrasive powders or abrasive liquids – Aggressive all-purpose cleaners and degreaser sprays – Oven sprays Cleaning the greas...
Page 37 - OdorFree Charcoal Filter
Cleaning and care 37 Resetting the filter saturationindicator for the grease filters Once cleaning is complete, the filtersaturation indicator must be reset. While the blower is turned on, touchthe grease filter control for approx. 3 seconds, until only the 1 is flashing. The grease filter symb...
Page 38 - before
Cleaning and care 38 When to change the OdorFreeCharcoal Filter Replace the charcoal filter when it nolonger absorbs kitchen odorseffectively.It should be replaced at least every 6months. The filter saturation indicator remindsyou to regularly clean the charcoal filterby illuminating the charcoal ...
Page 39 - Before installation; Before installing the appliance,; Installation parts; and
Installation 39 Before installation Before installing the appliance, read all of the information containedin this chapter and also in the“IMPORTANT SAFETYINSTRUCTIONS” section. Installation parts 4 screws, ¹/₄“ x 4 ⁵/₁₆” (7 x 110 mm) and 4 plugs, ³/₈“ x 3 ¹/₈” (10 x 80 mm) for securing the ventila...
Page 40 - Appliance dimensions; Possible height range for appliance in vented mode
Installation 40 Appliance dimensions a Mounting area for the exhaust ducting and power cable. In recirculation mode,only the power cord is required. b Possible height range for appliance in vented mode c Possible height range for appliance in recirculation mode d Alternative installation with spacer...
Page 41 - Distance between cooktop and ventilation hood (S)
Installation 41 f A power cord is required to connect the hood to the socket in the ceiling. Withextraction mode flexible ducting is also required. Exhaust connection 6" (150 mm) Distance between cooktop and ventilation hood (S) Provided a larger distance is not given by the manufacturer of th...
Page 42 - Installation recommendations; – When selecting an installation height,; Structural support
Installation 42 Installation recommendations – A distance of at least 26" (660 mm) is recommended above electriccooktops to provide more workspaceand easier cooking under the hood. – When selecting an installation height, always take the user height intoconsideration. Users should haveample spac...
Page 43 - – Place a section of the exhaust
Installation 43 8 5 / 8 " 220 mm 8 5 / 8 " 220 mm dai3435aus Draw two intersecting lines on theceiling. For vented mode: – Place a section of the exhaust ducting in the ceiling and feed itdown through the cross-sectionalarea as illustrated. Exhaust ducting ofapprox. 27 ⁹/₁₆" (700 mm)...
Page 44 - Drill four holes
Installation 44 Use a knife to release the fourspacers and the two covers from thespacer frame supplied. Use the spacer frame as a drillingtemplate. Place it on the ceiling withthe arrows pointing forwards. Usingthe notches, align the spacer frameon the intersecting lines and makepencil marks fo...
Page 45 - The
Installation 45 The spacer frame can be installed between the chimney and the ceiling.This creates a shadow which gives theillusion of a gap between the ceiling andthe chimney. This is useful if the ceilingis not level or is uneven. The hood isaligned vertically with the spacerssupplied. Visual irre...
Page 48 - Check that the hose is held securely.
Installation 48 Secure the exhaust socket to thehose using a hose clip. Secure the hose to the directional unitsocket using a hose clip. Check that the hose is held securely. Push the telescopic chimney over theinstallation frame: – with the recirculation grilles at the bottom for vented mod...
Page 49 - Bend back the two retaining tabs.
Installation 49 Fit the four telescopic chimneyclamps. When the screws aretightened, the clamps spread out andpush the telescopic expansion pieceupwards. Tighten the screws only until the topedge of the telescopic chimney isevenly aligned with the ceiling or thespacer frame. Bend back the two re...
Page 51 - – With vented mode: upwards as far as
Installation 51 Connect the power cord. See“Electrical connection.” Place the exhaust ducting onto theexhaust socket. Unscrew both screws from theinstallation frame again. The canopy can now be adjusted to thedesired height, observing thepermissible height ranges: – With vented mode: upwards a...
Page 53 - Insert the safety screw on the inside.
Installation 53 Remove the grease filters from thehood. Insert the safety screw on the inside. With recirculation mode (RM)ventilation hoods, insert the OdorFreeCharcoal Filter. Carefully remove the protective foilfrom the grease filters. Reinsert the grease filters.
Page 54 - Air venting
Air venting 54 WARNING: Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can beharmful or fatal if inhaled.To reduce the risk of fire and toproperly exhaust air, the exhaustgases extracted by the hood shouldbe vented outside of the buildingonly.Do not vent exhaust air into sp...
Page 55 - Condensate trap; Push the exhaust hose over it.
Air venting 55 Condensate trap In addition to insulating the exhaustduct, we recommend installing acondensate trap to collect andevaporate any condensate which mightaccumulate.Condensate traps are available forexhaust ducts with a diameter of5" (125 mm) or 6" (150 mm). When installing a co...
Page 56 - Electrical connection; Grounding Instructions
Electrical connection 56 WARNING: TO REDUCE THE RISKOF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS, OBSERVETHE FOLLOWING:All electrical work should beperformed by a qualified electricianin strict accordance with nationalregulations (for USA: ANSI-NFPA 70)and local safety regulations.Installation, repa...
Page 57 - Service and warranty; Location of the data plate; This service is available in USA only.
Service and warranty 57 For faults that you cannot resolve onyour own, please contact your Mieledealer or Miele Technical Service. The telephone number for Miele is listedat the back of these instructions. When contacting Miele, please state themodel and serial number of yourventilation hood.These c...
Page 58 - Technical data; WiFi module; Optional accessories for recirculation mode
Technical data 58 Blower motor 350 W Overhead lighting 4 x 3 W Total connected load 362 W Supply voltage, frequency 120 V AC, 60 Hz Fuse 15 A Weight 77 lbs (35 kg) WiFi module Frequency band 2.412–2.462 GHz Maximum transmission power < 100 mW ZigBee® module Frequency band 2.405–2.48 GHz Maximum t...
Page 59 - National Headquarters; Canada; Headquarters and Miele Centre
9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Technical Service. Canada ImporterMiele Limited Headquarters and Miele Centre 800-843-7231609-419-4298 Technical ...
