Page 2 - Contents
Contents 2 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 3 Caring for the environment ................................................................................ 10 Description of functions .........................................................
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Appropriate use
IMPORTANT SAFETY INSTRUCTIONS 3 READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements.Improper use of the appliance can lead to personal injury andmaterial damage. Read all instructions before installing or using the appliance for thefirst time. Only use the appli...
Page 4 - Safety with children
IMPORTANT SAFETY INSTRUCTIONS 4 Safety with children As with any appliance, close supervision is necessary when used by children. Please supervise children in the vicinity of the hood and do not let them play with it. The LED ClearView lighting is very intense. Ensure that especially babies/sm...
Page 6 - Correct use
IMPORTANT SAFETY INSTRUCTIONS 6 During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is onlycompletely isolated from the electricity supply if one of the followingapplies: – The circuit breakers on the electrical service panel ...
Page 7 - – 1) You have a class ABC extinguisher, and you know how to operate it.
IMPORTANT SAFETY INSTRUCTIONS 7 – b) NEVER PICK UP A FLAMING PAN - You may be burned. – c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result. – d) Use a fire extinguisher ONLY if: – 1) You have a class ABC extinguisher, and you know how to operate it. – 2) ...
Page 8 - Proper installation
IMPORTANT SAFETY INSTRUCTIONS 8 There is a risk of fire if cleaning is not completed according to the instructions in this manual. Please note that the heat rising from the stovetop during cooking can cause the ventilation hood to become very hot.Do not touch the housing or the grease filters un...
Page 9 - Cleaning and maintenance
IMPORTANT SAFETY INSTRUCTIONS 9 An insufficient safety distance between the cooktop and the ventilation hood can result in damage to the ventilation hood.The minimum safety distances between the top of the cooktop andthe bottom of the ventilation hood given in the “Installation” sectionof this boo...
Page 10 - Caring for the environment; Disposal of your old appliance
Caring for the environment 10 Disposal of the packingmaterial The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of childr...
Page 11 - Description of functions; Extraction mode
Description of functions 11 The following functions are available onyour ventilation hood, depending on themodel: Extraction mode The air is drawn in and cleaned by thegrease filters and directed outside. Non-return flap A non-return flap in the ductingprevents the exchange of inside andoutside air ...
Page 12 - Guide to the appliance
Page 14 - Operation; Turning on the blower
Operation 14 Turning on the blower Switch the blower on as soon as youstart cooking. This is to ensure thatvapors are captured right from the start. Press the On/Off control . The blower turns on at level 2 . The symbol and 2 will light up in the blower level display. Selecting the power leve...
Page 15 - Turning power management on/off
Operation 15 Turning power management on/off You can deactivate powermanagement.Keep in mind that this may increaseenergy consumption. To set this option, turn off the fan andthe overhead lighting first. Press the and buttons at the same time for approx. 10 seconds,until 1 lights up. T...
Page 17 - Service and warranty; Location of the data plate; This service is available in USA only.
Service and warranty 17 For faults that you cannot resolve onyour own, please contact your Mieledealer or Miele Technical Service. The telephone number for Miele is listedat the back of these instructions. When contacting Miele, please state themodel and serial number of yourventilation hood.These c...
Page 18 - Cleaning and care; WARNING: TO REDUCE THE; Stainless steel housing; General information
Cleaning and care 18 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,OR INJURY TO PERSONS,OBSERVE THE FOLLOWING: Before cleaning or servicing thehood, disconnect it from the powersupply, see “IMPORTANT SAFETYINSTRUCTIONS”. Stainless steel housing General information The surfaces and contro...
Page 19 - Grease filters; Cleaning intervals
Cleaning and care 19 Grease filters Risk of fire! Oversaturated grease filters are a firehazard.Clean the grease filters at regularintervals. The reusable metal grease filters in theappliance remove the solid particlescontained in kitchen vapors (grease,dust, etc.), thereby preventing theventilati...
Page 20 - After cleaning; OdorFree Charcoal Filter; Reinsert the grease filters.
Cleaning and care 20 In a Miele dishwasher use the“Normal” program. Depending on the detergent used,cleaning the filters in a dishwashermay cause the inside filter surfaces tobecome discolored. However, this willnot affect the functioning of the greasefilters in any way. After cleaning After cle...
Page 21 - Disposing of charcoal filters
Cleaning and care 21 When to change the OdorFreeCharcoal Filter Replace the charcoal filter when it nolonger absorbs kitchen odorseffectively.It should be replaced at least every 6months. Disposing of charcoal filters The used charcoal filter can bedisposed of with the normalhousehold waste.
Page 22 - Changing a light bulb; Turn off the blower and the lighting.
Cleaning and care 22 Changing a light bulb Only use the specified light bulbs.Other bulbs, for example halogenbulbs, may become damaged due tothe high generation of heat. The light bulbs should be replaced withthe following: Bulb type .............................. LED, GU10Power ......................
Page 23 - Installation; Before installation; Before installing the appliance,; Installation parts; and
Installation 23 Before installation Before installing the appliance, read all of the information containedin this chapter and also in the“IMPORTANT SAFETYINSTRUCTIONS” section. Information is subject to change. Pleaserefer to our website to obtain the mostcurrent product specification, technical&a...
Page 24 - Appliance dimensions; Possible height range for appliance in vented mode
Installation 24 Appliance dimensions a Mounting area for the exhaust ducting and power cable. In recirculation mode,only the power cord is required. b Possible height range for appliance in vented mode c Possible height range for appliance in recirculation mode d Alternative installation with spacer...
Page 25 - Distance between cooktop and ventilation hood (S)
Installation 25 f A power cord is required to connect the hood to the socket in the ceiling. Withextraction mode flexible ducting is also required. Exhaust connection 6" (150 mm) Distance between cooktop and ventilation hood (S) Provided a larger distance is not given by the manufacturer of th...
Page 26 - Installation recommendations; – When selecting an installation height,; Structural support
Installation 26 Installation recommendations – A distance of at least 26" (660 mm) is recommended above electriccooktops to provide more workspaceand easier cooking under the hood. – When selecting an installation height, always take the user height intoconsideration. Users should haveample spac...
Page 27 - – Place a section of the exhaust
Installation 27 Draw two intersecting lines on theceiling. For vented mode: – Place a section of the exhaust ducting in the ceiling and feed itdown through the cross-sectionalarea as illustrated. Exhaust ducting ofapprox. 27 ⁹/₁₆" (700 mm) length isrequired between the ceiling and thehood ex...
Page 28 - Drill four holes
Installation 28 Use a knife to release the fourspacers and the two covers from thespacer frame supplied. Use the spacer frame as a drillingtemplate. Place it on the ceiling withthe arrows pointing forwards. Usingthe notches, align the spacer frameon the intersecting lines and makepencil marks fo...
Page 29 - The
Installation 29 The spacer frame can be installed between the chimney and the ceiling.This creates a shadow which gives theillusion of a gap between the ceiling andthe chimney. This is useful if the ceilingis not level or is uneven. The hood isaligned vertically with the spacerssupplied. Visual irre...
Page 32 - Check that the hose is held securely.
Installation 32 Secure the exhaust socket to thehose using a hose clip. Secure the hose to the directional unitsocket using a hose clip. Check that the hose is held securely. Push the telescopic chimney over theinstallation frame: – with the recirculation grilles at the bottom for vented mod...
Page 33 - Bend back the two retaining tabs.
Installation 33 Fit the four telescopic chimneyclamps. When the screws aretightened, the clamps spread out andpush the telescopic expansion pieceupwards. Tighten the screws only until the topedge of the telescopic chimney isevenly aligned with the ceiling or thespacer frame. Bend back the two re...
Page 35 - – With vented mode: upwards as far as
Installation 35 Connect the power cord. See“Electrical connection.” Place the exhaust ducting onto theexhaust socket. Unscrew both screws from theinstallation frame again. The canopy can now be adjusted to thedesired height, observing thepermissible height ranges: – With vented mode: upwards a...
Page 37 - Insert the safety screw on the inside.
Installation 37 Remove the grease filters from thehood. Insert the safety screw on the inside. With recirculation mode (RM)ventilation hoods, insert the OdorFreeCharcoal Filter. Carefully remove the protective foilfrom the grease filters. Reinsert the grease filters.
Page 38 - Air venting
Air venting 38 WARNING: Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can beharmful or fatal if inhaled.To reduce the risk of fire and toproperly exhaust air, the exhaustgases extracted by the hood shouldbe vented outside of the buildingonly.Do not vent exhaust air into sp...
Page 39 - Condensate trap; Push the exhaust hose over it.
Air venting 39 Condensate trap In addition to insulating the exhaustduct, we recommend installing acondensate trap to collect andevaporate any condensate which mightaccumulate.Condensate traps are available forexhaust ducts with a diameter of5" (125 mm) or 6" (150 mm). When installing a co...
Page 40 - Electrical connection; Grounding Instructions
Electrical connection 40 WARNING: TO REDUCE THE RISKOF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS, OBSERVETHE FOLLOWING:All electrical work should beperformed by a qualified electricianin strict accordance with nationalregulations (for USA: ANSI-NFPA 70)and local safety regulations.Installation, repa...
Page 41 - Technical data; Optional accessories for recirculation mode
Technical data 41 Blower motor 350 W Overhead lighting 4 x 3 W Total connected load 362 W Supply voltage, frequency 120 V AC, 60 Hz Fuse 15 A Weight 74.8 lbs (34 kg) Optional accessories for recirculation mode DUI 32 conversion kit to change from vented mode to recirculation mode andDKF 12-900 OdorF...
Page 43 - National Headquarters; Canada; Headquarters and Miele Centre
9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Technical Service. Canada ImporterMiele Limited Headquarters and Miele Centre 800-843-7231609-419-4298 Technical ...
