Middleby Marshall PS300 - Manual

Middleby Marshall PS300

Middleby Marshall PS300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

PS300 Series Oven

Owner’s Operating and Installation Manual Supplement

P/N 43068 • Rev. B • V1 • 3/00

THERMOCOUPLE INSTALLATION

1. Install one thermocouple sensing bulb into each of the

two holes in the rear panel of the oven, as shown in

Figure 1. Fasten each thermocouple in place using

one of the #10-32 x 3/8” screws supplied in the

Installation Kit.

2. Thread BOTH sets of thermocouple leads through the

grommet and into the machinery compartment, as

shown in Figure 1.

3. Remove the right-side panel of the machinery

compartment.

4. Thread the thermocouple leads through the side of

the machinery compartment as shown in Figure 2, and

into the electrical box (at the right-front of the machinery

compartment).

5. Connect BOTH sets of thermocouple leads to the

temperature controller as shown in Figure 3. Note

that the two thermocouples are now tied together at

the temperature controller.

6. Replace the right-side panel of the machinery

compartment.

7. Repeat Steps 1-6 for any other oven cavities in the

installation.

Figure 1 - Thermocouple Installation Locations

Figure 2 - Placing the Thermocouple Leads

Figure 3 - Thermocouple Lead Connections

Thermocouples

Grommet-

protected hole

8: White (positive)

7: Red (negative)

Ground: Shielded cable

This supplement provides updated information for your PS300 Series Oven

Owner’s Operating and Installation Manual

.

Any information provided in the manual that is NOT updated here is still current, and may be used normally.

DESCRIPTION OF CHANGE

PS300 Series Ovens now require the installation of TWO thermocouples, instead of the single thermocouple described
in the

Owner’s Operating Manual

. The procedure below replaces the “Thermocouple Installation” portion of your Manual’s

“Installation” section.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Middleby Marshall Models

All Middleby Marshall Other