McIntosh C2200 - Manual
McIntosh C2200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY
- Page 3 – Please take a short time to read the information in this; Table of Contents; Connections
- Page 4 – Important Information; The C2200 is designed to have only qualified; XLR Connectors; Connector Information
- Page 7 – Installation; Installation
- Page 8 – Rear Panel Connections
- Page 9 – How to Connect for Power Control
- Page 10 – Note: The unbalanced MAIN Audio Outputs and unbalanced; How to Connect for Audio and Data Control
- Page 11 – Any of the C2200’s High Level Inputs may be used for; How to Connect for Pass Thru Mode; Connect a Power Control Cable from the McIntosh A/V
- Page 12 – Connect Audio Cables from the C2200 Balanced OUT-; Notes: The unbalanced Audio OUTPUTS 2 and unbalanced; Connect a Control Cable from the C2200 POWER; Connect an RG6 or RG59U coaxial cable from the; Note: A Wall Mounted IR Sensor may also be used in place
- Page 14 – How to Operate the Setup Mode; Note: The Front Panel Display will indicate DISPLAY 20; Setup Function Name; Default Settings
- Page 15 – Notes: The possible range of adjustment in volume level is; Note: The Trim Level can also be set via the Remote
- Page 17 – Pass Thru Mode; Note: The C2200 has the ability to switch Off the Meter; Power On Option; Note: If the ALT Remote Control Code is selected, the C2200
- Page 18 – Firmware Version; Press the SETUP Push-button to access the Setup; De fa ult Title; Input Source Settings
- Page 19 – Notes: For normal operation, switch the C2200 On and Off
- Page 21 – How to Operate the C2200, con’t; The Meter Electronic Circuitry “Time Stretches” the
- Page 22 – Remote Control Push-Buttons; Mutes the audio
- Page 23 – Note: Your McIntosh Dealer can assist you with the; How to Operate by Remote Control
- Page 24 – Input and Output Switching; The glass assembly is then placed in the center of a mul-; Phono Circuitry; Technical Description; Input sensitivity of the phono amplifier is 4.4 millivolts.; Tone Control Circuitry
- Page 25 – Overall Design
- Page 26 – Vrms Unbalanced, 16Vrms Balanced; Note: Refer to the rear panel of the C2200 for the correct; Specifications
- Page 28 – Chambers Street
C2200
Owner’s Manual
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Tube Preamplifier
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT. WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. The lightning flash with arrowhead,within an equilateral triangle, is in-tended to alert the user to the presence...
3 Customer Service Technical Assistance Please Take A Moment Thank You Copyright 2003 © by McIntosh Laboratory, Inc. The serial number, purchase date and McIntosh Dealername are important to you for possible insurance claim orfuture service. The spaces below have been provided foryou to record that ...
4 Important Information 1. The C2200 uses Vacuum Tubes for amplifying the audio signal. The C2200 is designed to have only qualified Service Personnel perform any part(s) replacementincluding all the vacuum tubes. 2. For additional information on Audio Connections, refer to the Owner’s Manual(s) for...
