McCulloch MAC 316 XT - Manual
McCulloch MAC 316 XT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IDENTIFICATION OF SYMBOLS
- Page 3 – Starting Reminder; SAFETY RULES; PLAN AHEAD; WARNING
- Page 5 – KICKBACK; Kickback; REDUCE THE CHANCE OF
- Page 6 – KICKBACK SAFETY FEATURES; ASSEMBLY; ATTACHING THE BUMPER SPIKE
- Page 7 – ATTACHING THE BAR & CHAIN; CHAIN TENSION (Including units
- Page 8 – OPERATING YOUR UNIT; To stop the engine; IMPORTANT POINTS TO REMEMBER
- Page 9 – CHOKE/FAST IDLE LEVER
- Page 10 – CUTTING METHODS; IMPORTANT POINTS; FELLING LARGE TREES
- Page 11 – Overcutting; Using a log for support
- Page 12 – all the way through; SERVICE AND ADJUSTMENTS; MAINTENANCE SCHEDULE; CAUTION
- Page 13 – STORAGE
- Page 14 – DECLARATION OF CONFORMITY; EC Declaration of Conformity
- Page 15 – TECHNICAL DATA SHEET
INSTRUCTION MANUAL
IMPORTANT INFORMATION: Please read these instructions carefully
and make sure you understand them before using this unit. Retain these
instructions for future reference.
MANUEL D’INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS: Avant d’utiliser cet appareil,
veuillez lire atentivement les instructions et assurez-- vous de les avoir
comprises. Conservez les instructions pour référence ultérieure.
BETRIEBSANWEISUNG
WICHTIGE INFORMATION
:
Lesen Sie diese Hinweise zur Handha-
bung des Geräts aufmerksam durch. Verwenden Sie es erst, wenn
Sie sicher sind, daß Sie alle Anweisungen verstanden haben und
gut aufbewahren.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE: Lea atentamente las instrucciones y
asegúrese de entenderlas antes de utilizar esta aparato. Conserve las
instrucciones para la referencia en el futuro.
GB
FR
DE
ES
545167693
Rev. 1 3/31/08 BRW
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IDENTIFICATION (WHAT IS WHAT?) Chain Adjustment Tool (Bar Tool) Primer Bulb Fuel Mix Fill Cap Starter Housing Bar Oil Fill Cap Chain Front Hand Guard Front Handle Starter Rope ON/STOP Switch Muffler Idle Speed Screw Bumper Spike Bar Guard Guide Bar Chain Brake Nuts Cylinder Cover Throttle Lockout ...
3 IDENTIFICATION OF SYMBOLS Move ON/STOP switch to the ON position. Slowly press primer bulb 6 times. Pull the starter rope sharply 5 times with your right hand. Pull the starter rope sharply with your right hand until the engine starts. Pull choke/fast idle lever out to the full extent (to the FULL...
5 S Turn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap and refuel unit. S Store the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. ...