McCulloch MAC 250 B - Manual
McCulloch MAC 250 B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – ASSEMBLY; CARTON CONTENTS
- Page 9 – OPERATION
- Page 12 – MAINTENANCE
- Page 13 – SERVICE AND ADJUSTMENTS; REPLACING THE LINE
- Page 15 – STORAGE
- Page 17 – DECLARATION OF CONFORMITY
- Page 18 – TECHNICAL DATA SHEET
115306726
Rev. 5 1/15/11 BRW
INSTRUCTION MANUAL
IMPORTANT INFORMATION
: Please read these instructions carefully and make
sure you understand them before using this unit. Retain these instructions for future
reference.
MANUEL D’INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS:
Avant d’utiliser cet appareil, veuillez lire
atentivement les instructions et assurez--vous de les avoir comprises. Conservez
les instructions pour référence ultérieure.
BETRIEBSANWEISUNG
WICHTIGE INFORMATION:
Lesen Sie diese Hinweise zur Handhabung des
Geräts aufmerksam durch. Verwenden Sie es erst, wenn Sie sicher sind, daß Sie
alle Anweisungen verstanden haben und gut aufbewahren.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE:
Lea atentamente las instrucciones y
asegúrese de entenderlas antes de utilizar esta aparato. Conserve las instruc-
ciones para la referencia en el futuro.
GB
FR
DE
ES
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5 S Install required shield properly before using the unit. S Use only specified blade or trimmer head; make sure it is properly installed and se- curely fastened. S Never start engine with clutch shroud re- moved. The clutch can fly off and cause se- rious injury. S Be sure blade or trimmer head st...
9 OPERATION WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Contact an au- thorised service dealer. FUELING ENGINE WARNING: Remove fuel cap slowly when refueling.This engine is certifie...
12 S WHEN BLADE THRUST OCCURS -- Blade Thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to occur in areas where it is difficult to see the material being cut. By using the unit properly, the occurrence of blade thrust will be reduced and the operator will be...
