Page 2 - MAINTENANCE AND STORAGE; SAFETY RULES; Safe Operation Practices for Walk-Behind Powered Ro ta ry Tillers; WARNING; The engine exhaust from this product con-
2 • Keep children and pets away.• Do not overload the machine capacity by attempting to till too deep at too fast a rate. • Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing. • Never allow bystanders near the unit.• Use only attachments and accessor...
Page 3 - PRODUCT SPECIFICATIONS; CUSTOMER RESPONSIBILITIES; TABLE OF CONTENTS
3 PRODUCT SPECIFICATIONS Gasoline Capacity: 0.9 Quarts (0,85 L) Unleaded Regular Oil (API-SG-SL): SAE 10w-30(Above 32°F/0°C) (Capacity: 20 oz./0.6L) SAE 5w-30(Below 32°F/0°C) Spark Plug: Champion RJ19LM or J19LM (Gap: .030"/0.76mm) CONGRATULATIONS on your purchase of a new tiller. It has been de...
Page 4 - TOOLS REQUIRED FOR ASSEMBLY; CONTENTS OF HARDWARE PACK; ASSEMBLY; UNPACK CARTON & INSTALL HANDLE
4 OPERATOR’S POSITION (See Fig. 1) When right or left hand is mentioned in this manual, it means when you are in the operating position (standing behind tiller handles). Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure ...
Page 6 - KNOW YOUR TILLER; READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER.; OPERATION
6 KNOW YOUR TILLER READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your Tiller or in literature...
Page 7 - TILLING; HOW TO USE YOUR TILLER; TO TRANSPORT
7 The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses. 001...
Page 8 - TO START ENGINE
8 ADD GASOLINE • Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular un lead ed gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quan ti ti...
Page 9 - CULTIVATING
9 BREAKING IN YOUR TILLER Break-in your belt(s), pulleys and tine control before you actually begin tilling.• Start engine, tip tines off ground by pressing handles down and engage tine control to start tine rotation. Allow tines to rotate for five minutes. TILLING HINTS CAUTION: Until you are accus...
Page 10 - LUBRICATION CHART; GENERAL RECOMMENDATIONS; BEFORE EACH USE; SERVICE DATES; MAINTENANCE
10 LUBRICATION CHART GENERAL RECOMMENDATIONS The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must main tain tiller as instructed in this manual.Some adjustments will need to be made perio...
Page 11 - ENGINE; LUBRICATION; AIR FILTER
11 Fig. 12 Fig. 13 Disconnect spark plug wire before performing any maintenance (except car bu re tor adjustment) to prevent accidental start ing of engine.Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Re move fuel from tank before tipping unit for maintenance. Clean mu...
Page 12 - CLEANING
12 COOLING SYSTEM (See Fig. 15) Your engine is air cooled. For proper en gine performance and long life keep your engine clean.• Remove blower housing and clean as nec es sary.• Keep cylinder fins free of dirt and chaff. Fig. 15 MUFFLER Do not operate tiller without muffler. Do not tamper with exhau...
Page 13 - TILLER; TINE ARRANGEMENT; TO REMOVE CLUTCH HOUSING/ENGINE; SERVICE AND ADJUSTMENTS
13 TILLER Fig. 16 Fig. 17 Fig. 19 CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug. TINE ARRANGEMENT Your outer tines can be assembled in several different ways to suit your tilling or cultivating needs. CAUTION: Tines are sharp. Wear glo...
Page 14 - TO AD JUST CARBURETOR
14 Fig. 20 Fig. 21 Fig. 22 ENGINE TO AD JUST CARBURETOR The carburetor has been preset at the factory and ad just ment should not be necessary. However, engine per for mance can be affected by dif fer enc es in fuel, tem per a ture, al ti tude or load. If the carburetor does need ad just ment, conta...
Page 15 - FUEL SYSTEM; STORAGE; TILLER HANDLE STORAGE OPTIONS; OTHER
15 ENGINE FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS THE CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT...
Page 16 - TROUBLESHOOTING
16 Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in the Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Dirty air cleaner. 4. Clean or replace air cleaner cartridge. 5. Water in fuel. 5. Empty ...
Page 17 - DECALS
17 TILLER - - MODEL NUMBER MC550 (96083000300) DECALS KEY PART NO. NO. DESCRIPTION 1 433415 Decal, Tine, Shield, McCulloch 2 434458 Decal, Tine, Shield, Warning 3 141906 Decal, Warning, Rotating Tines 4 141907 Decal, Hand Placement 1 2 3 4
Page 22 - LIMITED WARRANTY
22 LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materi- als and work man ship. For a period of two (2) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, ...