Page 2 - Table of Contents
JOBNAME: No Job Name PAGE: 2 SESS: 8 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Seating and Safety Restraints 73 Seating 73 Safety restraints 75 Airbags 91 Child restraints 99 Tires, Wheels and Loading 111 Tire information 114 Tire inflation 115 Tire Pressure Monitoring System (TPM...
Page 3 - Accessories
JOBNAME: No Job Name PAGE: 3 SESS: 10 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Engine coolant 242 Fuel information 248 Maintenance product specifications and capacities 266 Engine data 270 Accessories 274 Index 275 All rights reserved. Reproduction by any means, electronic or mec...
Page 4 - Additional owner information is given in separate publications.; Introduction
JOBNAME: No Job Name PAGE: 4 SESS: 12 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og CALIFORNIA Proposition 65 Warning WARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known tothe State of California to cause cancer and birth de...
Page 5 - WARNING; statement. These comments should be read and observed.
JOBNAME: No Job Name PAGE: 5 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og SAFETY AND ENVIRONMENT PROTECTION Warning symbols in this guide How can you reduce the risk ofpersonal injury to yourself orothers? In this guide, answers tosuch questions are contained incomments highl...
Page 6 - in the Seating and Safety Restraints chapter.; Notice to owners of pickup trucks and utility type vehicles; Owner’s Guide
JOBNAME: No Job Name PAGE: 6 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Event Data Recorder The computer in your vehicle is capable of recording detailed datapotentially including but not limited to information such as: • the use of restraint systems including seat belts by...
Page 7 - Your vehicle is not equipped with a snowplowing package.; Using your vehicle as an ambulance
JOBNAME: No Job Name PAGE: 7 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Using your vehicle with a snowplow WARNING: Do not use this vehicle for snowplowing. Your vehicle is not equipped with a snowplowing package. Using your vehicle as an ambulance WARNING: Do not use this ...
Page 8 - Vehicle Symbol Glossary
JOBNAME: No Job Name PAGE: 8 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Protecting theEnvironment Fasten Safety Belt Airbag - Front Airbag - Side Child Seat Chi...
Page 9 - INFORMATION ABOUT THIS GUIDE
JOBNAME: No Job Name PAGE: 9 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Vehicle Symbol Glossary Power Window Lockout Personal Alarm SystemFeature Engine Oil Engine Coolant Engine CoolantTemperature Do Not Open When Hot Battery Avoid Smoking, Flames,or Sparks Battery Acid Ex...
Page 10 - Instrument Cluster
JOBNAME: No Job Name PAGE: 10 SESS: 4 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Headlamp control (pg. 46) Instrument panel dimmer control (pg. 47) Instrument cluster (pg. 12) Speed control* (pg. 60) Hood release (pg. 229) Driver air bag (pg. 91) Parking brake release (pg. 160) Tur...
Page 12 - WARNING LIGHTS AND CHIMES
JOBNAME: No Job Name PAGE: 12 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING LIGHTS AND CHIMES Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists wi...
Page 13 - Brake system warning light:; To; BRAKE
JOBNAME: No Job Name PAGE: 13 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: Under engine misfire conditions, excessive exhausttemperatures could damage the catalytic converter, the fuelsystem, interior floor coverings or other vehicle components,possibly causing a fir...
Page 14 - Low tire pressure warning:; ABS
JOBNAME: No Job Name PAGE: 14 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Anti-lock brake system: If the ABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected; have the systemserviced immediately by yourauthorized dealer. Normal braking is still fu...
Page 15 - OFF
JOBNAME: No Job Name PAGE: 15 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Engine coolant temperature: Illuminates when the engine coolanttemperature is high. Stop thevehicle as soon as possible , switch off the engine and let cool. Refer to Engine coolant in the Maintenance ...
Page 17 - Engine coolant
JOBNAME: No Job Name PAGE: 17 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og GAUGES Speedometer: Indicates the current vehicle speed. Engine coolant temperaturegauge: Indicates engine coolant temperature. At normal operatingtemperature, the needle will be inthe normal range (be...
Page 19 - Entertainment Systems
JOBNAME: No Job Name PAGE: 19 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og AUDIO SYSTEMSAM/FM stereo (if equipped) Display preference: You can select Clock mode, which displays the time, or Frequency mode, which displays the current radio frequency, toappear in the radio disp...
Page 21 - AM/FM stereo single CD system
JOBNAME: No Job Name PAGE: 21 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og AM/FM stereo single CD system 1. CD eject: Press to eject the CD. 2. CLK (Clock): Press CLK until SELECT HOUR or SELECTMINUTE is displayed. Press MENU to adjust the hours/minutes. Press CLK to display ...
Page 22 - TUNE
JOBNAME: No Job Name PAGE: 22 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Autoset: Press MENU to set the strongest local radio stationsfor AM/FM1/FM2 without losingyour original manually set presetstations.When the six strongest stations are filled, the station stored in pre...
Page 25 - CATEGORY
JOBNAME: No Job Name PAGE: 25 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og modes and use / to make an adjustment in those modes. CATEGORY (Satellite Radio if equipped): Press MENU until thecurrently active category appears inthe display (CATEGORY ALL). In CATEGORY ALL, press ...
Page 26 - Category
JOBNAME: No Job Name PAGE: 26 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 5. TUNE : Press to manually go down/up ( / ) the radio frequency and also to selectvarious settings in menu mode. In CATEGORY ALL, press / to scroll through the list of available SIRIUS channel Categor...
Page 29 - Premium in-dash CD6/MP3 disc audio system; Press to select; EJ; Press CLK until
JOBNAME: No Job Name PAGE: 29 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Premium in-dash CD6/MP3 disc audio system 1. AM/FM: Press to select AM/FM1/FM2 frequency bands. 2. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already inthe system, the disc will startplaying. 3. EJ...
Page 32 - To load a CD/MP3 disc to a specific slot, press LOAD and
JOBNAME: No Job Name PAGE: 32 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 18. LOAD: To load a CD/MP3 disc to a specific slot, press LOAD and select the slot number by pressing the memory preset buttons. Pressand hold LOAD to autoload up to six discs. 19. CD slot: Insert a CD...
Page 37 - To play your portable music player using the auxiliary input jack:; Begin with the vehicle parked and the radio turned off.
JOBNAME: No Job Name PAGE: 37 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 19. CD slot: Insert a CD/MP3, label side up. CD units are designed to play commercially pressed 4.75 in (12cm) audio compact discs only. Due to technical incompatibility,certain recordable and re-recor...
Page 38 - GENERAL AUDIO INFORMATION
JOBNAME: No Job Name PAGE: 38 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 4. Turn the radio on, using either a tuned FM station or a CD loaded into the system. Adjust the volume to a comfortable listening level. 5. Turn the portable music player on and adjust the volume to 1...
Page 39 - Warranty Guide; Satellite radio information (if equipped)
JOBNAME: No Job Name PAGE: 39 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og AM: 530, 540–1700, 1710 kHz FM: 87.7, 87.9–107.7, 107.9 MHz Radio reception factors: There are three factors that can affect radio reception: • Distance/strength: The further you travel from an FM stat...
Page 40 - Satellite radio reception factors:; To receive the satellite signal, your; SIRIUS satellite radio service:; SIRIUS Satellite Radio is a subscription
JOBNAME: No Job Name PAGE: 40 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og more information and a complete list of SIRIUS satellite radio channels,visit www.sirius.com in the United States, www.sirius-canada.ca inCanada, or call SIRIUS at 1–888–539–7474. Satellite radio recep...
Page 43 - Climate Controls
JOBNAME: No Job Name PAGE: 43 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og HEATER ONLY SYSTEM(IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of aircirculated in the vehicle. 2. Temperature selection: Controls the temperature of theairflow in the vehicle. 3. Air flo...
Page 46 - Lights
JOBNAME: No Job Name PAGE: 46 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps, licenseplate lamps and tail lamps. Turns the headlamps on. Foglamp control (if equipped) The foglamps can be tu...
Page 47 - Flash to pass; the ignition must be in the ON position and; PANEL DIMMER CONTROL
JOBNAME: No Job Name PAGE: 47 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Flash to pass Pull toward you slightly to activateand release to deactivate. Daytime running lamps (DRL) (if equipped) Turns the headlamps on with a reduced output.To activate: • the ignition must be i...
Page 48 - Headlamp aim adjustment; The center of the headlamp is
JOBNAME: No Job Name PAGE: 48 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og problems fixing the alignment of your headlamps, have them checked bya qualified service technician. Headlamp aim adjustment The headlamps are designed to be mechanically aimed, but can also beaimed vi...
Page 49 - TURN SIGNAL CONTROL
JOBNAME: No Job Name PAGE: 49 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 5. Locate the vertical adjuster for each headlamp. Adjust the aimby using a 4 mm wrench to turnthe adjuster control eitherclockwise (to adjust down) orcounterclockwise (to adjust up). 6. In addition to...
Page 50 - INTERIOR LAMPS; The courtesy lamp lights when:; BULB REPLACEMENT; The correct bulbs will not damage the lamp assembly or void the; Function; Headlamps
JOBNAME: No Job Name PAGE: 50 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og INTERIOR LAMPS Courtesy/reading lamps (if equipped) The courtesy lamp lights when: • any door is opened. • the instrument panel dimmerswitch is held up until thecourtesy lamps come on. • the remote ent...
Page 51 - Replacing headlamp bulbs
JOBNAME: No Job Name PAGE: 51 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Function Number of bulbs Trade number Rear license platelamps 2 194 Backup lamps 2 3155 Dome lamp 1 912 Map/dome-SuperCab(if equipped) 2 904 Map/dome-RegularCab (if equipped) 1 904 All replacement bulb...
Page 52 - NOTE
JOBNAME: No Job Name PAGE: 52 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: Children and Halogen Bulbs: Playing with a halogenbulb is dangerous. Serious injuries could be caused by droppinga halogen bulb or breaking in some other way. Always keephalogen bulbs out of t...
Page 53 - Replacing front park/turn side marker bulbs
JOBNAME: No Job Name PAGE: 53 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og tabs in the lamp assembly. When the grooves are aligned, push thebulb into the lamp assembly until the plastic base contacts the rearof the lamp assembly. 2. Install the bulb retaining ring over the pl...
Page 55 - Replacing fog lamp bulbs; Replacing high-mount brake lamp
JOBNAME: No Job Name PAGE: 55 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Replacing fog lamp bulbs WARNING: Handling Halogen Bulbs: When a halogen bulbbreaks, it is dangerous. These bulbs contain pressurized gas. Ifone is broken, it will explode and serious injuries could be...
Page 56 - Replacing license plate lamp bulbs; Reach behind the rear bumper
JOBNAME: No Job Name PAGE: 56 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Replacing license plate lamp bulbs The license plate bulbs are locatedbehind the rear bumper. To changethe license plate lamp bulbs: 1. Reach behind the rear bumper to locate the bulb socket. 2. Twist ...
Page 57 - Driver Controls
JOBNAME: No Job Name PAGE: 57 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og MULTI-FUNCTION LEVER Windshield wiper: Rotate the end of the control away from you toincrease the speed of the wipers(from desired interval to low or highspeed position); rotate towards youto decrease ...
Page 61 - Setting speed control; Disengaging speed control
JOBNAME: No Job Name PAGE: 61 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: Do not shift the gearshift lever into N (Neutral)with the speed control on. You may lose control of the vehicleor cause engine system damage. Setting speed control The controls for using your ...
Page 62 - There are three ways to turn off the speed control:
JOBNAME: No Job Name PAGE: 62 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Resuming a set speed Press the RES (resume) control andrelease it. This will automaticallyreturn the vehicle to the previouslyset speed. The RES control will notwork if the vehicle speed is notfaster t...
Page 63 - Activating overdrive; (Overdrive) is the normal drive position for the best fuel economy.; Deactivating overdrive; Automatic Transmission
JOBNAME: No Job Name PAGE: 63 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Depress the brake pedal or the clutch pedal (if equipped). This willnot erase your vehicle’s previously set speed. • Press the speed control OFFcontrol. • Turn OFF the ignition. Note: When you turn o...
Page 66 - KEYS; If your vehicle is equipped with the SecuriLock; UNLOCK; Locks and Security
JOBNAME: No Job Name PAGE: 66 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og KEYS The key operates all locks on your vehicle. You should always carry asecond key with you in a safe place in case you require it in anemergency. If your vehicle is equipped with the SecuriLock y Pa...
Page 68 - How to reprogram your remote entry transmitters; all remote entry transmitters
JOBNAME: No Job Name PAGE: 68 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og To replace the battery: 1. Twist a thin coin between the two halves of the remote entrytransmitter near the key ring.DO NOT TAKE THE RUBBERCOVER AND CIRCUIT BOARDOFF THE FRONT HOUSING OFTHE REMOTE ENTR...
Page 69 - Illuminated entry
JOBNAME: No Job Name PAGE: 69 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Note: Ensure the brake pedal is not depressed during this sequence. To reprogram the remote entrytransmitters: 1. Ensure the vehicle is electronically unlocked. 2. Put the key in the ignition. 3. Turn ...
Page 70 - Programming spare keys
JOBNAME: No Job Name PAGE: 70 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og The battery saver will shut off the interior lamps after several minutes ifthey are left on accidentally. SECURILOCK Y PASSIVE ANTI-THEFT SYSTEM (IF EQUIPPED) SecuriLock y passive anti-theft system is ...
Page 71 - A maximum of eight keys can be coded to your vehicle.
JOBNAME: No Job Name PAGE: 71 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • When the ignition is in the 1 (OFF/LOCK) position, the indicator willnot flash. • When the igniton is in the 3 (ON) position, the indicator will glow for3 seconds to indicate the engine is enabled. R...
Page 73 - Seating and Safety Restraints
JOBNAME: No Job Name PAGE: 73 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og SEATING Adjusting the front manual seat (if equipped) WARNING: Never adjust the driver’s seat or seatback when thevehicle is moving. The seat could slide too far leaving youunable to operate vital cont...
Page 74 - Press down until it is firmly latched into place.
JOBNAME: No Job Name PAGE: 74 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Pull lever located at the side of theseat cushion up to adjust seatback. 60/40 seat (if equipped) To gain access to the storagecompartment in your armrest (ifequipped), lift the latch to open lid. The ...
Page 76 - Airbag Supplemental Restraints; Front crash severity sensor
JOBNAME: No Job Name PAGE: 76 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Front passenger sensing system • Passenger Airbag Off indicator light. • Restraints Control Module (RCM) with impact and safing sensors. • Restraint system warning light and back-up tone. • The elect...
Page 77 - Front passenger sensing system; STRONGLY; encouraged to always properly restrain children; Front safety belt usage sensors
JOBNAME: No Job Name PAGE: 77 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og position. The system is designed to help protect smaller drivers sittingclose to the driver airbag by providing a lower airbag output level. Front passenger sensing system For airbags to do their job t...
Page 78 - Safety belt usage sensors; Front outboard safety belt pretensioners; Energy management retractors; Determining if the Personal Safety System; Warning lights and chimes
JOBNAME: No Job Name PAGE: 78 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og allows your Personal Safety System y to tailor the airbag deployment and safety belt pretensioner activation depending upon safety belt usage.Refer to Safety belt usage sensors later in this chapter. F...
Page 79 - Safety restraints precautions
JOBNAME: No Job Name PAGE: 79 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Safety restraints precautions WARNING: Always drive and ride with your seatback uprightand the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sitwhere ...
Page 80 - Combination lap and shoulder belts; Insert the belt tongue into the; Adjusting the center and rear center facing jump seat lap belts; The lap belt does not adjust automatically.
JOBNAME: No Job Name PAGE: 80 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: On Cab Plus 4 vehicles, do not open the rear doorwhen the rear safety belt is still buckled. Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckleclos...
Page 82 - When to use the automatic locking mode; Any time; a child safety seat is installed in a passenger front seat.; How to disengage the automatic locking mode
JOBNAME: No Job Name PAGE: 82 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Automatic locking mode (outboard front passenger seatingposition only) for use with child safety seats In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove ...
Page 83 - Safety belt maintenance; Front safety belt height adjustment
JOBNAME: No Job Name PAGE: 83 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: After any vehicle collision, the entire safety beltsystem should be checked for proper operation by an authorizeddealer. Verify that the ( automatic locking retractors” in all outboard seating...
Page 84 - Safety belt extension assembly; Do not use extensions to change the fit of the shoulder belt; If unsure about the proper procedures, bring your vehicle to an
JOBNAME: No Job Name PAGE: 84 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Regular Cab and four–door CabPlus 4 To lower the shoulder belt height, push the button and slide the heightadjuster down. To raise the height of the shoulder belt, slide the heightadjuster up. Pull d...
Page 85 - Safety belt warning light and indicator chime; Conditions of operation
JOBNAME: No Job Name PAGE: 85 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og position. All safety belt assemblies, including retractors, buckles, frontsafety belt buckle assemblies, buckle support assemblies (slide bar-ifequipped), shoulder belt height adjusters (if equipped), ...
Page 86 - BeltMinder
JOBNAME: No Job Name PAGE: 86 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og If... Then... The driver’s safety belt isbuckled before the ignitionswitch is turned to the ONposition... The safety belt warning light andindicator chime remain off. BeltMinder T The BeltMinder t feat...
Page 88 - in 4 of us will be; Prime time for an accident.
JOBNAME: No Job Name PAGE: 88 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Reasons given... Consider... 9 Crashes are rare events 9 36,700 crashes occur every day. The more we drive, the more we areexposed to 9 rare 9 events, even for good drivers. 1 in 4 of us will be seriou...
Page 89 - People; One time disable; The driver and front passenger BeltMinder
JOBNAME: No Job Name PAGE: 89 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Reasons given... Consider... 9 I have an airbag 9 Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate in rear andside crashes or rollovers. 9 I’d rat...
Page 91 - AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS); The airbag supplemental restraint system consists of:; Important supplemental restraint system (SRS) precautions
JOBNAME: No Job Name PAGE: 91 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) The airbag supplemental restraint system is designed to work inconjunction with the safety belts to help protect the driver and frontoutboard passenger from c...
Page 95 - Determining if the system is operational; Airbag readiness
JOBNAME: No Job Name PAGE: 95 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpo...
Page 99 - Airbag supplemental restraint system; Important child restraint precautions
JOBNAME: No Job Name PAGE: 99 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Relationship Center at the phone number shown in the CustomerAssistance section of this Owner’s Guide. The front passenger sensing system may detect small or medium objectsplaced on the seat cushion. F...
Page 100 - Children and safety belts; If the child is the proper size, restrain the child in a safety seat.; Child booster seats
JOBNAME: No Job Name PAGE: 100 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og NOTE: Always follow the instructions and warnings that come with any infant or child restraint you might use. WARNING: Do not install a child seat in a center facing jumpseat. Children and safety belt...
Page 101 - When children should use booster seats; Does the lap belt rest low across the hips?; Types of booster seats; There are two types of belt-positioning booster seats:
JOBNAME: No Job Name PAGE: 101 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Booster seats position a child so that safety belts fit better. They lift thechild up so that the lap belt rests low across the hips and the kneesbend comfortably. Booster seats also make the shoulder...
Page 102 - Those with a high back.; The importance of shoulder belts
JOBNAME: No Job Name PAGE: 102 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Those with a high back. If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boosterseat would be a better choice. Both can be us...
Page 103 - When installing a child safety seat:
JOBNAME: No Job Name PAGE: 103 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: Never put the shoulder belt under a child’s arm orbehind the back because it eliminates the protection for theupper part of the body and may increase the risk of injury ordeath in a collision...
Page 106 - Attaching child safety seats with tether straps
JOBNAME: No Job Name PAGE: 106 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 5. To put the retractor in the automatic locking mode, graspthe shoulder portion of the beltand pull downward until all ofthe belt is extracted and a clickis heard. 6. Allow the belt to retract. The b...
Page 109 - Clip the tether strap to the
JOBNAME: No Job Name PAGE: 109 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 4. Clip the tether strap to the anchor. WARNING: If the tether strapis clipped incorrectly, the childsafety seat may not beretained properly in the eventof a collision. Center seating location 60/40se...
Page 111 - NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS; VEHICLE CHARACTERISTICS; Tires, Wheels and Loading
JOBNAME: No Job Name PAGE: 111 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS Utility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare encountered on streets,highways and off-road. Util...
Page 112 - How your vehicle differs from other vehicles
JOBNAME: No Job Name PAGE: 112 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Power is supplied to all four wheelsthrough a transfer case or powertransfer unit. 4WD vehicles allowyou to select different drive modesas necessary. Information ontransfer case operation and shifting...
Page 114 - Traction AA A B C; The traction grade assigned to this tire is based on; Temperature A B C
JOBNAME: No Job Name PAGE: 114 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og government test course. For example, a tire graded 150 would wear oneand one-half (1 1/2) times as well on the government course as a tiregraded 100. The relative performance of tires depends upon the...
Page 116 - If you are driving the vehicle at its maximum weight load, make; blowout; is the tire manufactures’
JOBNAME: No Job Name PAGE: 116 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og At least once a month and before long trips, inspect each tire and checkthe tire pressure with a tire gauge (including spare, if equipped). Inflateall tires to the inflation pressure recommended by Ma...
Page 117 - TIRE CARE
JOBNAME: No Job Name PAGE: 117 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og drop of 1 psi (7 kPa) in inflation pressure. Check your tire pressuresfrequently and adjust them to the proper pressure which can be foundon the Safety Compliance Certification Label or Tire Label.If ...
Page 119 - Tire Replacement Requirements
JOBNAME: No Job Name PAGE: 119 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: AgeTires degrade over time depending on many factors such asweather, storage conditions, and conditions of use (load, speed,inflation pressure, etc.) the tires experience throughout theirlive...
Page 121 - Safety practices; Observe posted speed limits; Highway hazards
JOBNAME: No Job Name PAGE: 121 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to b...
Page 122 - Tire and wheel alignment; When it is time to replace front tires with new ones, this is an; Tire rotation; Scheduled maintenance
JOBNAME: No Job Name PAGE: 122 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Tire and wheel alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side, ...
Page 124 - INFORMATION CONTAINED ON THE TIRE SIDEWALL
JOBNAME: No Job Name PAGE: 124 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/All Wheel Drive (AWD)vehicles (front tires at top ofdiagram) Sometimes irregular tire wear can be corrected by rotating the tires. Note: If your ...
Page 125 - Information on “P” type tires
JOBNAME: No Job Name PAGE: 125 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Information on “P” type tires P215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (Note thatthe tire size, load index and speedratin...
Page 127 - Treadwear, Traction and Temperature Grades; The treadwear grade is a comparative rating based on the; Maximum Permissible Inflation Pressure:; Indicates the tire
JOBNAME: No Job Name PAGE: 127 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Compliance Certification Label, which is located on the B-Pillar orthe edge of the driver’s door, for the correct tire pressure for yourvehicle. 12. Treadwear, Traction and Temperature Grades • Treadw...
Page 129 - Vehicle loading — with and without a trailer
JOBNAME: No Job Name PAGE: 129 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temp...
Page 131 - It is; Understanding your Tire Pressure Monitoring System (TPMS); When your temporary spare tire is installed (if equipped); Changing tires with TPMS
JOBNAME: No Job Name PAGE: 131 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Changing tires with TPMS Each road tire is equipped witha tire pressure sensor fastenedto the inside rim of the wheel.The pressure sensor is coveredby the tire and is not visibleunless the tire is rem...
Page 132 - When you believe your system is not operating properly
JOBNAME: No Job Name PAGE: 132 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og When you believe your system is not operating properly The main function of the Tire Pressure Monitoring System is to warn youwhen your tires need air. It can also warn you in the event the system isn...
Page 133 - Possible cause Customer Action Required; Solid Warning Light
JOBNAME: No Job Name PAGE: 133 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Low Tire PressureWarning Light Possible cause Customer Action Required Solid Warning Light Tire(s)under-inflated 1. Check your tire pressure toensure tires are properlyinflated; refer to Inflating you...
Page 134 - Spare tire in use Your temporary spare tire is in; When inflating your tires
JOBNAME: No Job Name PAGE: 134 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Low Tire PressureWarning Light Possible cause Customer Action Required Flashing WarningLight Spare tire in use Your temporary spare tire is in use. Repair the damaged roadwheel and re-mount it on thev...
Page 135 - SNOW TIRES AND CHAINS; Snow tires must be the same size and grade as the tires you; VEHICLE LOADING – WITH AND WITHOUT A TRAILER
JOBNAME: No Job Name PAGE: 135 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og underinflated, carefully drive the vehicle to the nearest location whereair can be added to the tires. Inflate all the tires to the recommendedinflation pressure. SNOW TIRES AND CHAINS WARNING: Drivin...
Page 136 - Base Curb Weight; – is the weight of the vehicle including a full tank of; Vehicle Curb Weight; – is the weight of your new vehicle when you
JOBNAME: No Job Name PAGE: 136 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og capability, with or without a trailer. Properly loading your vehicle willprovide maximum return of vehicle design performance. Before loadingyour vehicle, familiarize yourself with the following terms...
Page 137 - Payload; – is the combined weight of cargo and passengers that the; “THE COMBINED WEIGHT OF OCCUPANTS AND; for
JOBNAME: No Job Name PAGE: 137 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s do...
Page 138 - Cargo Weight; – includes all weight added to the Base Curb Weight,
JOBNAME: No Job Name PAGE: 138 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight....
Page 139 - These; Trailer towing
JOBNAME: No Job Name PAGE: 139 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Labellocated on t...
Page 141 - Steps for determining the correct load limit:
JOBNAME: No Job Name PAGE: 141 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: Exceeding any vehicle weight rating limitationcould result in serious damage to the vehicle and/or personalinjury. Steps for determining the correct load limit: 1. Locate the statement “The c...
Page 142 - TRAILER TOWING
JOBNAME: No Job Name PAGE: 142 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og you have been planning for the past 2 years. Measuring the inside ofthe vehicle with the rear seat folded down, you have room for 12-100lb. (45 kg) bags of cement. Do you have enough load capacity tot...
Page 143 - Vehicle Loading
JOBNAME: No Job Name PAGE: 143 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Towing a trailer places an additional load on your vehicle’s engine,transmission, axle, brakes, tires and suspension. Inspect thesecomponents carefully after any towing operation. 4x2 w/manual transmi...
Page 147 - Preparing to tow
JOBNAME: No Job Name PAGE: 147 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 4x4 w/automatic transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) *When towing on roads with steep grades or m...
Page 149 - Tail lamp
JOBNAME: No Job Name PAGE: 149 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og The rated capacities (as shown in this guide) for trailer towing with thefactory bumper are only valid when the trailer hitch ball is installeddirectly into the ball hole in the bumper. Addition of br...
Page 150 - Driving while you tow; Servicing after towing; Trailer towing tips
JOBNAME: No Job Name PAGE: 150 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Driving while you tow When towing a trailer: • Keep your speed no faster than 70 mph (112 km/h) during the first500 miles (800 km) of towing a trailer, and don’t make full throttlestarts. • Turn off t...
Page 152 - Vehicles equipped with an automatic transmission; Release the parking brake.
JOBNAME: No Job Name PAGE: 152 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Move the gearshift to the neutral position. • Turn the key in the ignition to the OFF/UNLOCKED position. • The maximum recommended speed is 55 mph (88 km/h). • The maximum recommended distance is un...
Page 153 - CAMPER BODIES; Your pickup is not recommended for slide–in camper bodies.
JOBNAME: No Job Name PAGE: 153 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og CAMPER BODIES Your pickup is not recommended for slide–in camper bodies. CIMS #695136 com_no-camper.bseries itdseq=180 REVIEW COPY ——2007 B-Series (mbs), Owners Guide (post-2002-fmt) (own2002), Market...
Page 154 - position when driving.; Preparing to start your vehicle; Engine starting is controlled by the powertrain control system.; Driving
JOBNAME: No Job Name PAGE: 154 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og STARTING Positions of the ignition 1. ACCESSORY, allows the electrical accessories such asthe radio to operate while theengine is not running. 2. LOCK, locks the steering wheel, automatic transmission...
Page 155 - in this chapter for more instructions.; Important safety precautions; Before starting the vehicle:
JOBNAME: No Job Name PAGE: 155 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WARNING: Extended idling at high engine speeds can producevery high temperatures in the engine and exhaust system,creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your v...
Page 157 - Starting the engine
JOBNAME: No Job Name PAGE: 157 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Some warning lights will briefly illuminate. See Warning lights and chimes in the Instrument Cluster chapter for more information regarding the warning lights. Starting the engine Note: Whenever you s...
Page 158 - BRAKES; Refer to
JOBNAME: No Job Name PAGE: 158 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og strongly recommended if you live in a region where temperatures reach-10°F (-23°C) or below. For best results, plug the heater in at least threehours before starting the vehicle. The heater can be plu...
Page 160 - Parking brake; The parking brake is not recommended to stop a moving vehicle.
JOBNAME: No Job Name PAGE: 160 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Parking brake Apply the parking brake wheneverthe vehicle is parked. To set theparking brake, press the parkingbrake pedal down until the pedalstops. The BRAKE warning lamp in theinstrument cluster il...
Page 163 - Insert the key and turn it to; Apply the brake pedal; Fuses and relays; Driving with a 5–speed automatic transmission (if equipped)
JOBNAME: No Job Name PAGE: 163 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 1. Apply the parking brake, turn ignition key to LOCK, thenremove the key. 2. Insert the key and turn it to OFF. Apply the brake pedal and shift to N (Neutral) . WARNING: When the key is in the igniti...
Page 165 - Forced downshifts; Allowed in
JOBNAME: No Job Name PAGE: 165 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og N (Neutral) With the gearshift lever in N (Neutral), the vehicle can be started and isfree to roll. Hold the brake pedal down while in this position. (Overdrive) The normal driving position for thebes...
Page 167 - Make sure that your vehicle is at a complete stop before you shift; Parking your vehicle; Apply the brake and shift into the neutral position.
JOBNAME: No Job Name PAGE: 167 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Upshifts Shift from: Transfer case position (if equipped) 2WD and 4H 4L 1 -2 10 mph (16 km/h) 4 mph (6 km/h) 2 - 3 19 mph (26 km/h) 8 mph (10 km/h) 3 - 4 28 mph (43 km/h) 12 mph (16 km/h) 4 - 5 (Overd...
Page 168 - Removing the key; If your vehicle gets stuck in mud or snow; WD system indicator lights; - Momentarily illuminates
JOBNAME: No Job Name PAGE: 168 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Removing the key Turn the ignition off, push therelease lever (located above theignition), then turn the key towardyou and remove the key. If your vehicle gets stuck in mud or snow If your vehicle get...
Page 169 - Using the electronic shift 4WD system; LOW
JOBNAME: No Job Name PAGE: 169 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • 4x4 LOW – Momentarily illuminates when the vehicle isstarted. Illuminates when 4L(4WD Low) is engaged. Using the electronic shift 4WD system 2H (2WD High) - Power to the rear wheels only; used for s...
Page 170 - on; off; indicating the shift is complete.; Driving off-road with 4WD
JOBNAME: No Job Name PAGE: 170 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • If shifting into 4L (4WD Low), wait for the 4WD LOW light in theinstrument cluster to turn on indicating the shift is complete. • If shifting out of 4L (4WD Low), wait for the 4WD LOW light in thein...
Page 174 - Wet brakes do not stop the vehicle as quickly as dry brakes.
JOBNAME: No Job Name PAGE: 174 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og When braking, apply the brakes as you normally would. In order to allowthe anti-lock brake system (ABS) to operate properly, keep steadypressure on the brake pedal. Make sure you allow sufficient dist...
Page 175 - HAZARD FLASHER; With extended use, the flasher may run down your battery.; FUEL PUMP SHUT-OFF SWITCH; Roadside Emergencies
JOBNAME: No Job Name PAGE: 175 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og HAZARD FLASHER The hazard flasher is located on thesteering column, just behind thesteering wheel. The hazard flasherswill operate when the ignition is inany position or if the key is not inthe igniti...
Page 176 - Wait a few seconds and return; FUSES AND RELAYS; Always replace a fuse with one that has the specified amperage
JOBNAME: No Job Name PAGE: 176 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og The fuel pump shut-off switch islocated under the right-hand side ofthe glove box, just above the carpet. To reset the switch: 1. Turn the ignition OFF. 2. Check the fuel system for leaks. 3. If no le...
Page 177 - Standard fuse amperage rating and color; Passenger compartment fuse panel
JOBNAME: No Job Name PAGE: 177 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A ...
Page 180 - Power mirrors; Power distribution box; If the battery has been disconnected and reconnected, refer to the
JOBNAME: No Job Name PAGE: 180 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 30 5A Power mirrors 31 20A Front park lamps, Rear parklamps, License plate lamps,Dimmer switch, Trailer tow parklamps 3...
Page 187 - Dissimilar spare tire/wheel information
JOBNAME: No Job Name PAGE: 187 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Have a flat serviced by an authorized dealer in order to prevent damageto the TPMS sensor, refer to Changing tires with TPMS in the Tires, Wheels and Loading chapter. Replace the spare tire with a roa...
Page 188 - Full-size dissimilar spare without label on wheel
JOBNAME: No Job Name PAGE: 188 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Use snow chains on the end of the vehicle with the dissimilar sparetire • Use more than one dissimilar spare tire at a time • Use commercial car washing equipment • Try to repair the dissimilar spar...
Page 189 - Tire Pressure Monitoring System; Tool; Removing the spare tire
JOBNAME: No Job Name PAGE: 189 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Towing a trailer • Driving vehicles equipped with a camper body • Driving vehicles with a load on the cargo rack Drive cautiously when using a full-size dissimilar spare tire/wheel andseek service a...
Page 190 - When connecting the jack handle, assemble the following:
JOBNAME: No Job Name PAGE: 190 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og When connecting the jack handle, assemble the following: • one handle extension and onetypical extension. To assemble,slide parts together. Todisconnect, depress button andpull apart. • one wheel nut ...
Page 191 - Tire change procedure
JOBNAME: No Job Name PAGE: 191 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 3. Insert the square end of the jack handle into the rear accesshole located just above the rearbumper and below the tailgate. Forward motion will stop andresistance to turning will be feltwhen proper...
Page 194 - Stowing the flat/spare tire
JOBNAME: No Job Name PAGE: 194 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 10. Remove the jack and fully tighten the lug nuts, in theorder shown. Refer to Wheel lug nut torque specifications later in this chapter for theproper lug nut torquespecification. 11. Stow the flat t...
Page 195 - If there is corrosion on the area where the wheel contacts the; OVERHEATING; Shift the automatic transmission into P (Park) or the manual
JOBNAME: No Job Name PAGE: 195 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WHEEL LUG NUT TORQUE SPECIFICATIONS Retighten the lug nuts to the specified torque within 100 miles (160 km)after any wheel disturbance (rotation, flat tire, wheel removal, etc.). Lug nut socket size/...
Page 196 - Adding coolant; JUMP STARTING
JOBNAME: No Job Name PAGE: 196 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 4. Check whether coolant or steam is escaping from under the hood or from the engine compartment. • If steam is coming from the engine compartment: do not go near the front of the vehicle. Stop the en...
Page 197 - lightning bolts
JOBNAME: No Job Name PAGE: 197 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Preparing your vehicle When the battery is disconnected or a new battery is installed, theautomatic transmission must relearn its shift strategy. As a result, thetransmission may have firm and/or soft...
Page 198 - terminal of the assisting battery.
JOBNAME: No Job Name PAGE: 198 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. + – +...
Page 199 - Do not; grounding; Jump starting
JOBNAME: No Job Name PAGE: 199 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’s engine, away from the battery andthe fuel injection system. Do not use fuel lines, engine rocke...
Page 200 - Removing the jumper cables; Remove the jumper cable from the
JOBNAME: No Job Name PAGE: 200 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts ...
Page 202 - WRECKER TOWING; it is acceptable to tow the vehicle with the front
JOBNAME: No Job Name PAGE: 202 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is re...
Page 203 - Year and model of vehicle; Customer Assistance
JOBNAME: No Job Name PAGE: 203 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og CUSTOMER ASSISTANCE (U.S.A. MAINLAND AND HAWAII) Your complete and permanent satisfaction is our business. We are here toserve you. All Authorized Mazda Dealers have the knowledge and thetools to keep...
Page 204 - Vehicle identification
JOBNAME: No Job Name PAGE: 204 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 4. Purchase date and current mileage 5. Your authorized dealer’s name and location 6. Your question(s) If you live outside the U.S.A., please contact your nearest MazdaDistributor. CUSTOMER ASSISTANCE...
Page 205 - Mediation/Arbitration Program
JOBNAME: No Job Name PAGE: 205 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 6. Your authorized dealer’s name and location 7. The nature of your problem and/or cause of dissatisfaction. The Department, in cooperation with the local Mazda ServiceRepresentative, will review the ...
Page 206 - Regional Offices
JOBNAME: No Job Name PAGE: 206 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 235 Yorkland Boulevard, Suite 407North York, OntarioM2J 4Y8http://camvap.ca Regional Offices Regional Offices Areas Covered Mazda Canada Inc. Western Region 8171 Ackroyd Road Suite 2000 Richmond, B.C....
Page 208 - MAZDA IMPORTERS/DISTRIBUTORS
JOBNAME: No Job Name PAGE: 208 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og California Civil Code Section 1793.22(b) presumes that the manufacturerhas had a reasonable number of attempts to conform the vehicle to itsapplicable express warranties if, within the first 18 months...
Page 210 - Outside Canada
JOBNAME: No Job Name PAGE: 210 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og The differences may make it difficult or even impossible for your vehicleto receive satisfactory servicing in other countries. We stronglyrecommend that you NOT take your Mazda outside the United Stat...
Page 211 - SERVICE PUBLICATIONS; If they don’t have what you need in stock, they can order it for you.
JOBNAME: No Job Name PAGE: 211 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Please refer to your manufacturers warranty booklet for moreinformation. ADD-ON NON-GENUINE PARTS AND ACCESSORIES Non-genuine parts and accessories for Mazda vehicles can be found instores. These may ...
Page 212 - REPORTING SAFETY DEFECTS
JOBNAME: No Job Name PAGE: 212 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og PUBLICATION ORDER NUMBER PUBLICATION DESCRIPTION 9999 95 022B 06 WORKSHOP MANUAL 9999 95 020G 06 WIRING DIAGRAM 9999 95 023C 06 OWNER’S MANUAL WORKSHOP MANUAL: Covers recommended maintenance and repai...
Page 214 - Wash the vehicle first. Refer to; PAINT CHIPS; Cleaning
JOBNAME: No Job Name PAGE: 214 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These prod...
Page 215 - Always read the instructions before using the products.; ALUMINUM WHEELS AND COVERS; Clean with cool or lukewarm water and a neutral pH shampoo.; ENGINE
JOBNAME: No Job Name PAGE: 215 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and industrial fallout before repairing paint chips. • Always read the instructions before using the products....
Page 217 - WINDOWS AND WIPER BLADES
JOBNAME: No Job Name PAGE: 217 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • 4.0L Engine • Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage. PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plast...
Page 218 - INSTRUMENT PANEL AND CLUSTER LENS; Remove dust and loose dirt with a vacuum cleaner.
JOBNAME: No Job Name PAGE: 218 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og a special solution in addition to alcohol which helps to remove the hotwax deposited on the wiper blade and windshield from automated carwash facilities. Be sure to replace wiper blades when they appe...
Page 220 - Driving in dusty conditions.; Maintenance and Specifications
JOBNAME: No Job Name PAGE: 220 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og INTRODUCTION Be extremely careful to prevent injury to yourself and others or damageto your vehicle when using this manual for inspection and maintenance. If you’re unsure about any procedure it descr...
Page 221 - CHART SYMBOLS; Adjust
JOBNAME: No Job Name PAGE: 221 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og CHART SYMBOLS I : Inspect and if necessary, correct, clean or replace A Adjust R : Replace L : Lubricate Normal driving service intervals — perform at the months or distancesshown, whichever occurs fi...
Page 222 - Wheel
JOBNAME: No Job Name PAGE: 222 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Maintenance Item Maintenance Interval (Number of months or Miles (km), whichever comes first) Months 4 8 12 16 20 24 28 32 36 40 44 48 x 1000 miles 5 10 15 20 25 30 35 40 45 50 55 60 (x 1000 km) (8) (...
Page 223 - Schedule 1 continued
JOBNAME: No Job Name PAGE: 223 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og *5 The California Air Resources Board has determined that the failure toperform this maintenance item will not nullify the emission warranty norlimit recall liability prior to completion of the vehicl...
Page 226 - Off road operation; OWNER MAINTENANCE
JOBNAME: No Job Name PAGE: 226 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Special OperatingConditions Replace Engine Oil and Filter Inspect Brake System Replace Fuel Filter Change Automatic T ransmission Fluid Replace Spark Plugs Replace Engine Air Filter Change Manual T ra...
Page 227 - At least monthly
JOBNAME: No Job Name PAGE: 227 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Note any changes in the sound of the exhaust or any smell or exhaustfumes in the vehicle. • Check for vibrations in the steering wheel. Notice any increasedsteering effort or looseness in the steeri...
Page 228 - Retightening lug nuts; Wheel Lug Nut Torque Specification; SERVICE RECOMMENDATIONS; scheduled maintenance; PRECAUTIONS WHEN SERVICING YOUR VEHICLE
JOBNAME: No Job Name PAGE: 228 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Check battery water level (non-maintenance free). • Check battery connections and clean if necessary. Retightening lug nuts • Retighten the lug nuts to the specified torque at 500 miles (800 km)afte...
Page 229 - Working with the engine on; Automatic transmission:; OPENING THE HOOD; Go to the front of the vehicle
JOBNAME: No Job Name PAGE: 229 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 3. Block the wheels. Working with the engine on • Automatic transmission: 1. Set the parking brake and shift to P (Park). 2. Block the wheels. • Manual transmission: 1. Set the parking brake, depress ...
Page 230 - IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
JOBNAME: No Job Name PAGE: 230 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.3L I4 engine 1. Windshield washer fluid reservoir 2. Engine coolant reservoir 3. Engine oil dipstick 4. Transmission fluid dipstick (automatic transm...
Page 233 - WINDSHIELD WASHER FLUID; Refill capacities; WINDSHIELD WIPER BLADES
JOBNAME: No Job Name PAGE: 233 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meets Mazda specification . Do not u...
Page 234 - Changing the wiper blades; Windows and wiper blades; ENGINE OIL
JOBNAME: No Job Name PAGE: 234 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Check the wiper blades for wear at least twice a year or when they seemless effective. Substances such as tree sap and some hot wax treatmentsused by commercial car washes reduce the effectiveness of ...
Page 236 - If the oil level is; between the two holes or between the MIN and; the oil level is acceptable,
JOBNAME: No Job Name PAGE: 236 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • 4.0L SOHC V6 engine 6. Wipe the indicator clean. Insert the indicator fully, then remove it again. • If the oil level is between the two holes or between the MIN and MAX marks (depending on applicat...
Page 237 - Put the indicator back in and ensure it is fully seated.
JOBNAME: No Job Name PAGE: 237 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • 3.0L V6 engineSAE 5W-20 • 4.0L SOHC V6 engineSAE 5W-30 • Oil levels above the MAX mark or upper hole may cause enginedamage. Some oil must be removed from the engine by an authorizeddealer. 7. Put t...
Page 238 - Adding engine oil; Checking the engine; Engine Oil Recommendations
JOBNAME: No Job Name PAGE: 238 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter. 2. If the engine oil level is not within the normal range, add only certified engine oil ...
Page 239 - Engine Oil Filter Recommendation; scheduled maintenance.
JOBNAME: No Job Name PAGE: 239 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Change your engine oil and filter according to the appropriate schedulelisted in scheduled maintenance. Do not use supplemental engine oil additives, oil treatments or enginetreatments. They are unnec...
Page 240 - BATTERY
JOBNAME: No Job Name PAGE: 240 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og It is recommended you use the appropriate Mazda oil filter (or anotherbrand meeting Mazda specifications) for your engine. BATTERY Your vehicle is equipped with aMazda maintenance-free batterywhich no...
Page 242 - of distilled water and Mazda Genuine Engine Coolant; maximum cooling system efficiency.; LEAD; RECYCLE
JOBNAME: No Job Name PAGE: 242 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og will not affect function or durability of the transmission. Over time theadaptive learning process will fully update transmission operation to itsoptimum shift feel. If the battery has been disconnect...
Page 244 - Adding engine coolant
JOBNAME: No Job Name PAGE: 244 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og When the engine is cold, check the level of the engine coolant in thereservoir. • The engine coolant should be at the “cold fill level” or within the “coldfill range” as listed on the engine coolant r...
Page 246 - Checking engine coolant; Recycled engine coolant; Always dispose of used automotive fluids in a responsible manner.; Coolant refill capacity; Maintenance product specifications and capacities; Severe climates
JOBNAME: No Job Name PAGE: 246 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 5. Fill the coolant reservoir slowly with the proper coolant mixture (see above), to within the “COLD FILL RANGE” or the “FULL COLD”level on the reservoir. If you removed the radiator cap in an overfl...
Page 247 - NEVER increase the coolant concentration above 60%.; If you drive in extremely hot climates:; NEVER decrease the coolant concentration below 40%.; For fuel filter replacement, see your authorized dealer. Refer to
JOBNAME: No Job Name PAGE: 247 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • NEVER increase the coolant concentration above 60%. • Increased engine coolant concentrations above 60% willdecrease the overheat protection characteristics of the enginecoolant and may cause engine...
Page 248 - Observe the following guidelines when handling automotive fuel:
JOBNAME: No Job Name PAGE: 248 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELSImportant safety precautions WARNING: Do not overfill the fuel tank. The pressure in anoverfilled tank may cause leakage and lead to fuel spray andfire. WARN...
Page 251 - Cleaner air; Choosing the Right; Octane recommendations
JOBNAME: No Job Name PAGE: 251 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og prohibited by law and could damage your vehicle. Do not use fuelcontaining methanol. It can damage critical fuel system components. Your vehicle was not designed to use fuel or fuel additives with met...
Page 252 - Running out of fuel; Warning lights; ESSENTIALS OF GOOD FUEL ECONOMY; Maintenance
JOBNAME: No Job Name PAGE: 252 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Many of the world’s automakers approved the World-wide Fuel Charterthat recommends gasoline specifications to provide improvedperformance and emission control system protection for your vehicle.Gasoli...
Page 254 - Driving style — good driving and fuel economy habits; Habits; Maintenance product
JOBNAME: No Job Name PAGE: 254 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og economy under current driving conditions. Additionally, keeping recordsduring summer and winter will show how temperature impacts fueleconomy. In general, lower temperatures give lower fuel economy. D...
Page 255 - Conditions; Using fuel blended with alcohol may lower fuel economy.; EPA window sticker
JOBNAME: No Job Name PAGE: 255 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og • Perform all regularly scheduled maintenance items. Follow therecommended maintenance schedule and owner maintenance checksfound in scheduled maintenance. Conditions • Heavily loading a vehicle or to...
Page 259 - POWER STEERING FLUID
JOBNAME: No Job Name PAGE: 259 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og POWER STEERING FLUID • 2.3L I4 engine • 3.0L V6 engine • 4.0L V6 engine Check the power steering fluid. Refer to the service maintenance sectionfor the service interval schedules. If adding fluid is n...
Page 260 - BRAKE FLUID
JOBNAME: No Job Name PAGE: 260 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 1. Start the engine and let it run until it reaches normal operating temperature (the engine coolant temperature gauge indicator will benear the center of the normal area between H and C). 2. While th...
Page 261 - TRANSMISSION FLUID; scheduled maintenance information
JOBNAME: No Job Name PAGE: 261 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og CLUTCH FLUID (IF EQUIPPED) Check the fluid level. Refer to scheduled maintenance for the service interval schedules. During normal operation, the fluid level in the clutch reservoir shouldremain const...
Page 262 - Low fluid level
JOBNAME: No Job Name PAGE: 262 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og 2. If driven in hot weather, city traffic, pulling a trailer, allow transmission to cool for 30 minutes before checking. 3. Engage parking brake, start engine. 4. Put your foot on the brake pedal and ...
Page 263 - Checking and adding manual transmission fluid (if equipped)
JOBNAME: No Job Name PAGE: 263 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og Checking and adding manual transmission fluid (if equipped) 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear. 3. Ensure that the vehicle cannot move. 4. Cl...
Page 264 - DRIVELINE UNIVERSAL JOINT AND SLIP YOKE
JOBNAME: No Job Name PAGE: 264 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og TRANSFER CASE FLUID (IF EQUIPPED) 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear. 3. Ensure the vehicle cannot move. 4. Clean the filler plug. 5. Remove ...
Page 265 - CHECKING AND ADDING REAR DIFFERENTIAL FLUID
JOBNAME: No Job Name PAGE: 265 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og CHECKING AND ADDING REAR DIFFERENTIAL FLUID 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear. 3. Assure the vehicle cannot move. 4. Clean the filler plug. ...
Page 266 - MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES; REVIEW; Owners
JOBNAME: No Job Name PAGE: 266 SESS: 1OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES Item Application Mazda part name or equivalent Capacity Brake fluid and clutch fluid (if equipped) All High Performance DOT 3 Motor Vehicle Brake Flui...
Page 267 - Item
JOBNAME: No Job Name PAGE: 267 SESS: 1OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Item Application Mazda part name or equivalent Capacity Engine coolant 2.3 L I4 engine with manual transmission Premium Engine Coolant 2 10.5 quarts (10.0L) 2.3L I4 engine with automatic transmission ...
Page 269 - Adding
JOBNAME: No Job Name PAGE: 269 SESS: 1OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Item Application Mazda part name or equivalent Capacity Fuel tank Regular cab (Short wheel base) — 17 gallons (64.4L) Cab Plus 4 19.5 gallons (73.8L) 1 Brake fluid will drop slowly as the brakes wear ...
Page 273 - TRANSMISSION/TRANSAXLE CODE DESIGNATIONS
JOBNAME: No Job Name PAGE: 273 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og The Vehicle Identification Number (VIN) contains the followinginformation: 1. World manufacturer identifier 2. Brake system / Gross Vehicle Weight Rating (GVWR) /Restraint System 3. Vehicle line, seri...
Page 274 - CELL PHONES; Use of cell phones and other devices by driver:
JOBNAME: No Job Name PAGE: 274 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og CELL PHONES Use of cell phones and other devices by driver: WARNING: Use of any electrical devices such as cell phones,computers, portable radios, vehicle navigation or other devicesby the driver whil...
Page 275 - Index
JOBNAME: No Job Name PAGE: 275 SESS: 3 OUTPUT: Thu Aug 3 11:45:36 2006/ford_pdm/ford/own2002/mbs/og A ABS (see Brakes) .....................158 Airbag supplemental restraintsystem ..........................................91 and child safety seats ..............94description ...........................