Mazda 2005 B2300 Truck - Manuals

Event Data Recorder The computer in your vehicle is capable of recording detailed datapotentially including but not limited to information such as: • the use of restraint systems including seat belts by the driver andpassengers, • information about the performance of various systems and modules inth...

Using your vehicle with a snowplow WARNING: Do not use this vehicle for snowplowing. Your vehicle is not equipped with a snowplowing package. Using your vehicle as an ambulance WARNING: Do not use this vehicle as an ambulance. Your vehicle is not equipped with an ambulance preparation package. REVIE...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Protecting theEnvironment Fasten Safety Belt Air Bag-Front Air Bag-Side Child Seat Child Seat InstallationWarning Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Br...

Vehicle Symbol Glossary Power Window Lockout Personal Alarm SystemFeature Engine Oil Engine Coolant Engine CoolantTemperature Do Not Open When Hot Battery Avoid Smoking, Flames,or Sparks Battery Acid Explosive Gas Fan Warning Power Steering Fluid Maintain Correct FluidLevel MAX MIN Emission System E...

Headlamp control (pg. 35) Instrument panel dimmer control (pg. 36) Instrument cluster (pg. 12) Speed control* (pg. 52) Hood release (pg. 204) Driver air bag (pg. 76) Parking brake release (pg. 148) Turn signal and wiper/washer control (pg. 46) * If equipped REVIEW COPY 2005 Mazda B Series (mbs) , Ow...

WARNING LIGHTS AND CHIMES Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.Many lights will illuminate when you start your vehicle to make ...

Check fuel cap: Illuminates when the fuel cap may not be properlyinstalled. Check the fuel filler cap ifthis light remains on. Continueddriving with this light on may causethe Check Engine warning light tocome on. It may take a long period of time for the system to detect animproperly installed or p...

Air bag readiness: If this light fails to illuminate when ignition is turnedto ON, continues to flash or remainson, have the system servicedimmediately. A chime will alsosound when a malfunction in the supplemental restraint system has beendetected. Safety belt: Reminds you to fasten your safety bel...

Overdrive off (if equipped): Illuminates when the overdrivefunction of the transmission hasbeen turned off, refer to the Driving chapter. If the light does not come on or the light flashes steadily, have your vehicle serviced as soon as possible, damageto the transmission could occur. Four wheel dri...

GAUGES Speedometer: Indicates the current vehicle speed. Engine coolant temperaturegauge: Indicates engine coolant temperature. At normal operatingtemperature, the needle will be inthe normal range (between “H” and“C”). If it enters the red section, the engine is overheating. Stopthe vehicle as soon...

AM/FM STEREO (IF EQUIPPED) 1. AM/FM: Press to select AM/FM1/FM2 frequency bands. 2. CLK: Press until SELECT HOUR / SELECT MINS appears.Press AUDIO to adjust the hours/minutes.Press CLK to display the time when the ignition is off. 3. AUDIO: Press AUDIO to toggle through the following modesand use / ...

1. CD eject: Press to eject the CD. 2. CLK (Clock): Press CLK until SELECT HOUR or SELECTMINUTE is displayed. Press MENU to adjust the hours/minutes. Press CLK to display the time when the ignition isoff. 3. MUTE: Press to mute the playing media. Press again toreturn to the playing media. 4. MENU: P...

Dolby: Dolby 威 noise reduction: Reduces tape noise and hiss. Press MENU to cycle Dolby ON/OFF. The Dolby 威 noise reduction system is manufactured under license from Dolby LaboratoriesLicensing Corporation. Dolby 威 and the double-D symbol are registered trademarks of Dolby 威 Laboratories Licensing Co...

the CD player. The label may peel and cause the CD to becomejammed. It is recommended that homemade CDs be identifiedwith permanent felt tip marker rather than adhesive labels.Ballpoint pens may damage CDs. Please contact your dealer forfurther information. 20. Cassette slot: Insert a cassette, faci...

16. ON/OFF/Volume: Press to turn ON/OFF. Turn toincrease/decrease volume.If the volume is set above acertain level and the ignition isturned off, the volume will comeback on at a “nominal” listening level when the ignition switch isturned back on. 17. LOAD: To load a CD/MP3 disc to a specific slot, ...

AUDIO SYSTEM WARRANTY AND SERVICE Refer to the Warranty Guide for audio system warranty information. If service is necessary, see your authorized Mazda dealership. REVIEW COPY 2005 Mazda B Series (mbs) , Owners Guide (post-2002-fmt) (own2002) , Market: USA_English (fus) Entertainment Systems 31

HEATER ONLY SYSTEM(IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of aircirculated in the vehicle. 2. Temperature selection: Controls the temperature of theairflow in the vehicle. 3. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief d...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps,license plate lamps and tail lamps. Turns the headlamps on. Foglamp control (if equipped) The foglamps can be turned onwhen the ignition is in the ONposition and the headlamp control isin either of the following...

High beams After turning the headlamps on,push the lever toward theinstrument panel to activate. Pullthe lever towards you to deactivate. Flash to pass Pull toward you slightly to activateand release to deactivate. PANEL DIMMER CONTROL Use to adjust the brightness of theinstrument panel and all appl...

HEADLAMP AIM ADJUSTMENT The headlamps are designed to be mechanically aimed, but can also beaimed visually by doing the following: 1. Park your vehicle on a level surface about 25 feet(7.6 meters) away from avertical plain surface (3).Check your headlamp alignmentat night or in a dark area sothat yo...

5. Locate the vertical adjuster for each headlamp. Adjust the aimby using a 4 mm wrench to turnthe adjuster control eitherclockwise (to adjust down) orcounterclockwise (to adjust up). 6. In addition to the horizontal line marked in step 2, a pair ofvertical lines (5) must bemarked at the center line...

1. Make sure headlamp switch is in OFF position, then open the hood. 2. Reach behind the lamp assembly for access and disconnect the electrical connector. 3. Locate the bulb retaining ring behind the headlamp assembly. 4. Remove the bulb retaining ring by turning it counterclockwiseand remove the ol...

4. Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, youshould not need to align it again. Replacing front park/turn side marker bulbs 1. Make sure headlamp switch is in OFF position, then open thehood. 2. Remove the screw from...

Replacing fog lamp bulbs WARNING: Handling Halogen Bulbs: When a halogen bulbbreaks, it is dangerous. These bulbs contain pressurized gas. Ifone is broken, it will explode and serious injuries could becaused by the flying glass. If the glass portion of the bulb istouched with bare hands, body oil co...

MULTI-FUNCTION LEVER Windshield wiper: Rotate the end of the control away from you toincrease the speed of the wipers(from desired interval to low or highspeed position); rotate towards youto decrease the speed of the wipers. Windshield washer: Push the end of the stalk: • briefly: causes a single s...

One touch down Allows the driver’s window to openfully without holding the controldown. Press completely down onAUTO and release quickly. Pressagain to stop. AUTOMATIC DIMMING REAR VIEW MIRRORS (IF EQUIPPED) When the inside rear view mirror detects bright light from behind thevehicle, the inside rea...

Outside air temperature Display operation of the mirror withthe compass feature: • Press the right button to togglethe display between the compassdirection and no display. Display operation of mirror withtemperature and compass feature: • Press the right button once todisplay temperature °F andcompa...

Setting speed control The controls for using your speedcontrol are located on the steeringwheel for your convenience. 1. Press the ON control and release it. 2. Accelerate to the desired speed. 3. Press the SET + control and release it. 4. Take your foot off the accelerator pedal. 5. The indicator l...

Turning off speed control There are three ways to turn off the speed control: • Depress the brake pedal or the clutch pedal (if equipped). This willnot erase your vehicle’s previously set speed. • Press the speed control OFFcontrol. • Turn OFF the ignition. Note: When you turn off the speed control ...

KEYS The key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer. You should always carry a second key with you in a safe place in caseyou require it in an emergency. POWER DOOR LOCKS (IF EQUIPPED) Press the top of the control tounlock all doors and th...

To replace the battery: 1. Twist a thin coin between the two halves of the remote entrytransmitter near the key ring.DO NOT TAKE THE RUBBERCOVER AND CIRCUIT BOARDOFF THE FRONT HOUSING OFTHE REMOTE ENTRYTRANSMITTER. 2. Do not wipe off any grease on the battery terminals on theback surface of the circ...

To reprogram the remote entrytransmitters: 1. Ensure the vehicle is electronically unlocked. 2. Put the key in the ignition. 3. Turn the key from the 2 (LOCK) position to 3 (OFF). 4. Cycle eight times rapidly (within 10 seconds) between the 3(OFF) position and 4 (ON). Note: The eighth turn must end ...

60/40 seat (if equipped) To gain access to the storagecompartment in your armrest (ifequipped), lift the latch to open lid. The 60/40 seat cupholder (ifequipped) is detachable forcleaning. • Firmly grasp the bottom of thecup holder and pull up. To re-attach: • Slide the cupholder over the two pins l...

To return seat to original position, slide the seat bottom back, then pushthe seatback up to lock it in place. The seat will lock, and you will haveto use the release bar to move the seat back to the original position. REAR SEATS Center facing jump seat (two–door Cab Plus) (if equipped) To open, pul...

Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckleclosest to the direction thetongue is coming from) untilyou hear a snap and feel itlatch. Make sure the tongue issecurely fastened in the buckle. 2. To unfasten, push the release button and remove the tong...

Automatic locking mode (outboard front passenger seatingposition only) for use with child safety seats In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt.The automatic locking mode is not available on the driver safety bel...

WARNING: After any vehicle collision, the entire seat beltsystem should be checked for proper operation by a qualifiedtechnician. Verify that the ⴖ automatic locking retractors” in all outboard seating positions are functioning properly.Additionally check that the ⴖ automatic locking mode ⴖ feature ...

Front safety belt height adjustment Your vehicle has safety belt height adjustments for the driver and frontpassenger. Adjust the height of the shoulder belt so the belt rests acrossthe middle of your shoulder. • Regular Cab and four–door CabPlus 4 • two–door Cab Plus To lower the shoulder belt heig...

WARNING: The lap belts should fit snugly and as low aspossible around the hips, not around the waist. Failure toposition the lap belt correctly may cause serious injury in anaccident. Insert the tongue into the correctbuckle (the buckle closest to thedirection the tongue is comingfrom). To lengthen ...

Safety belt warning light and indicator chime The safety belt warning light illuminates in the instrument cluster and achime sounds to remind the occupants to fasten their safety belts. Conditions of operation If... Then... The driver’s safety belt is notbuckled before the ignitionswitch is turned t...

One time disable Any time the safety belt is buckled and then unbuckled during anignition ON cycle, the BeltMinder will be disabled for that ignition cycleonly. Deactivating/activating the BeltMinder feature Read steps 1 - 9 thoroughly before proceeding with thedeactivation/activation programming pr...

The energy absorbing functions may have been activated in a collision sothe restraints should be examined; if the front air bags have deployed,the pretensioners have also deployed and must be replaced — regardlessof whether there was an occupant in the passenger seat or not. WARNING: Failure to insp...

WARNING: Airbags have been known to kill or injure a child infront facing child restraints. When placing a child safety seat ina front seating position including the center (if equipped), youshould turn off the passenger airbag switch after being certainthe child is properly restrained. If the child...

Children and air bags For additional important safety information, read all information onsafety restraints in this guide. WARNING: Never place arearward facing child safetyrestraint in front of anactivated airbag. Airbags havebeen known to kill or injurechildren in front facing childsafety restrain...

WARNING: An air bag can kill or injure a child in a child seat.Child seats should never be placed in the front seats, unlesspassenger air bag switch is turned off. See Passenger air bag on/off switch in this chapter. WARNING: Rear facing child seats should NEVER be placed inthe front seats unless th...

The air bags inflate and deflaterapidly upon activation. After air bagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpowder (to lubricate the bag) orsodium compounds (e.g., bakingsoda) that result from thecombustion ...

• and the electrical wiring which connects the components. The RCM (restraints control module) monitors its own internal circuitsand the supplemental air bag electrical system wiring (including thepassenger air bag deactivation switch, the system wiring, the air bagsystem readiness light, the air ba...

Passenger air bag ON/OFF switch WARNING: An airbag ON/OFFswitch has been installed inthis vehicle. Before driving, always look at the face of the switch to be sure the switch isin the proper position inaccordance with theseinstructions and warnings.Failure to put the switch in aproper position can i...

WARNING: This vehicle has special energy management safetybelts for the driver and right front passenger. These particularbelts are specifically designed to work with air bags to helpreduce the risk of injury in a collision. The energy managementsafety belt is designed to give or release additional ...

WARNING: This vehicle has special energy management safetybelts for the driver and/or right front passenger. Theseparticular belts are specifically designed to work with air bagsto help reduce the risk of injury in a collision. The energymanagement safety belt is designed to give or release addition...

WARNING: An air bag can kill or injure a child in a child seat.Child seats should never be placed in the front seats, unlesspassenger air bag switch is turned off, See Passenger air bag on/off switch . WARNING: Rear facing child seats should NEVER be placed inthe front seats unless the passenger air...

WARNING: Do not leave children, unreliable adults, or petsunattended in your vehicle. Leaving a child or an animalunattended in a parked vehicle is dangerous. In hot weather,temperatures inside a vehicle can become high enough to causebrain damage or even death. Always take all children andanimals w...

Booster seats should be used until you can answer YES to ALL of thesequestions: • Can the child sit all the way backagainst the vehicle seat back withknees bent comfortably at theedge of the seat withoutslouching? • Does the lap belt rest low across the hips? • Is the shoulder belt centered on the s...

• Those with a high back. If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boosterseat would be a better choice. Both can be used in any vehicle in a seating position equipped withlap/shoulder belts if your child is over 40 lb....

SAFETY SEATS FOR CHILDREN Child and infant or child safety seats Use a safety seat that is recommended for the size and weight of thechild. Carefully follow all of the manufacturer’s instructions with thesafety seat you put in your vehicle. If you do not install and use thesafety seat properly, the ...

5. To put the retractor in the automatic locking mode, graspthe shoulder portion of the beltand pull downward until all ofthe belt is extracted and a clickis heard. 6. Allow the belt to retract. The belt will click as it retracts to indicate it is in the automatic locking mode. 7. Pull the lap belt ...

4. Clip the tether strap to the anchor. WARNING: If the tether strapis clipped incorrectly, the childsafety seat may not beretained properly in the eventof a collision. Center seating location 60/40seats with folding armrest When installing a child safety seat in the center position, route the tethe...

• 60/40 seats represents LATCH anchors. represents tether strap anchors. To improve child seat protection, use the tether anchor when using theLATCH to install a child safety seat. See Attaching child safety seats with tether straps in this section. WARNING: Never attach two LATCH child safety seats...

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS Utility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare encountered on streets,highways and off-road. Utilityvehicles and trucks are not designedfor cornering at speeds as high aspassenger cars any more tha...

Power is supplied to all four wheelsthrough a transfer case or powertransfer unit. 4WD vehicles allowyou to select different drive modesas necessary. Information on shiftingprocedures and maintenance can befound in your Owner’s Guide . You should become thoroughly familiarwith this information befor...

and one-half (1 1/2) times as well on the government course as a tiregraded 100. The relative performance of tires depends upon the actualconditions of their use, however, and may depart significantly from thenorm due to variations in driving habits, service practices, anddifferences in road charact...

INSPECTING AND INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, checkyour tires. If one looks lower thanthe others, use a tire gauge to ch...

WARNING: Under-inflation is the most common cause of tirefailures and may result in severe tire cracking, tread separationor ⴖ blowout ⴖ , with unexpected loss of vehicle control and increased risk of injury. Under-inflation increases sidewallflexing and rolling resistance, resulting in heat buildup...

when you get to the pump. It is normal for tires to heat up and the airpressure inside to go up as you drive. Never “bleed” or reduce airpressure when tires are hot. 2. Remove the cap from the valve on one tire, then firmly press the tire gauge onto the valve and measure the pressure. 3. Add enough ...

• Try to repair the temporary emergency spare tire Use of a temporary emergency spare tire at any one wheel location canlead to impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability •...

Stowing the flat/spare tire Note: Failure to follow spare tire stowage instructions may result in failure of cable or loss of spare tire. 1. Lay the tire on the ground with the valve stem facing up. 2. Slide the wheel partially under the vehicle and install the wire and retainer through the center o...

WARNING: When a wheel is installed, always remove anycorrosion, dirt and foreign materials present on the mountingsurfaces of the wheel and the surface of the front disc brakehub and rotor that contacts the wheel. Installing wheelswithout correct metal-to-metal contact at the wheel mountingsurfaces ...

3. 65: Indicates the aspect ratio which gives the tire’s ratio of height to width. 4. R: Indicates a “radial” type tire. 5. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match thenew wheel diameter. 6. 95: Indicates the tire’...

• Temperature: The temperature grades are A (the highest), B and C, representing the tire’s resistance to the generation of heat and itsability to dissipate heat when tested under controlled conditions on aspecified indoor laboratory test wheel. 13. Maximum Permissible Inflation Pressure: Indicates ...

the road in adverse (wet, snowy, etc.) conditions. Visually check yourtires for uneven wear, looking for high and low areas or unusuallysmooth areas. Also check for signs of tire damage. When the tread is worn down to1/16th of an inch (2 mm), tires mustbe replaced to prevent your vehiclefrom skiddin...

• Avoid potholes and objects on the road • Do not run over curbs or hit the tire against a curb when parking WARNING: If your vehicle is stuck in snow, mud, sand, etc., donot rapidly spin the tires; spinning the tires can tear the tireand cause an explosion. A tire can explode in as little as threet...

Tire rotation Rotating your tires at the recommended interval (as indicated in the Scheduled maintenance section of the Maintenance and Specifications chapter) will help your tires wear more evenly, providing better tire performance and longer tire life. • Front Wheel Drive (FWD)vehicles (front tire...

• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/All Wheel Drive (AWD)vehicles (front tires at top ofdiagram) Sometimes irregular tire wear can be corrected by rotating the tires. Note: If your tires show uneven wear ask a qualified technician at a Mazda dealership to check for and correct any...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weigh...

GVW (Gross Vehicle Weight) – is the Vehicle Curb Weight + cargo + passengers. GVWR (Gross Vehicle WeightRating) – is the maximum allowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo). The GVWR is shown on theSafety Compliance CertificationLabel located o...

WARNING: Exceeding any vehicle weight rating limitationcould result in serious damage to the vehicle and/or personalinjury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX pounds” on your vehicle’s placard. 2. ...

pound bags of cement. Do you have enough load capacity to transportthe cement to your home? If you and your friend each weighed 220pounds, the calculation would be: 1400 – (2 x 220) – (12 x 100) =1400 – 440 – 1200 = – 40 pounds; no, you do not have enough cargocapacity to carry that much weight. You...

Trailer tow connector Color Function Comment 1. Dark Green Trailer right-handturn signal Circuit activated when brakepedal is depressed or whenignition is on and right-handturn signal is applied. 2. Yellow Trailer left-hand turnsignal Circuit activated when brakepedal is depressed or whenignition is...

Trailer towing tips • Practice turning, stopping and backing up before starting on a trip toget the feel of the vehicle trailer combination. When turning, makewider turns so the trailer wheels will clear curbs and other obstacles. • Allow more distance for stopping with a trailer attached. • The tra...

STARTING Positions of the ignition 1. ACCESSORY, allows the electrical accessories such asthe radio to operate while theengine is not running. 2. LOCK, locks the steering wheel, automatic transmission gearshiftlever and allows key removal. 3. OFF, shuts off the engine and all accessories without loc...

WARNING: Extended idling at high engine speeds can producevery high temperatures in the engine and exhaust system,creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle in dry grassor other dry ground cover. The emission system heats up theengine compartment and...

• steering wheel is turned when getting in or out of the vehicle Make sure the corresponding lights illuminate or illuminate briefly. If alight fails to illuminate, have the vehicle serviced. • If the driver’s safety belt is fastened, the light may not illuminate. Refer to the Instrument Cluster cha...

you may experience increased cranking times, rough idle or hesitationuntil the engine has warmed up. Consult your fuel distributor for theavailability of winter grade (E d 85) ethanol. High-quality blends of winter grade (E d 85) ethanol will produce satisfactory cold weather starting and driving re...

WARNING: If you smell exhaust fumes inside your vehicle,have your dealer inspect your vehicle immediately. Do not driveif you smell exhaust fumes. Important ventilating information If the engine is idling while the vehicle is stopped for a long period oftime, open the windows at least one inch (2.5 ...

The ABS operates by detecting theonset of wheel lockup during brakeapplications and compensates forthis tendency. The wheels areprevented from locking even whenthe brakes are firmly applied. Theaccompanying illustration depictsthe advantage of an ABS equippedvehicle (on bottom) to a non-ABSequipped ...

Parking brake Apply the parking brake wheneverthe vehicle is parked. To set theparking brake, press the parkingbrake pedal down until the pedalstops. The BRAKE warning lamp in theinstrument cluster illuminates andremains illuminated (when theignition is turned ON) until theparking brake is released....

WARNING: Vehicles with a higher center of gravity such asutility and four-wheel drive vehicles handle differently thanvehicles with a lower center of gravity. Utility and four-wheeldrive vehicles are not designed for cornering at speeds as highas passenger cars any more than low-slung sports cars ar...

3. Start the vehicle. If it is necessary to use the above procedure to move the gearshift lever,it is possible that a fuse has blown or the vehicle’s brakelamps are notoperating properly. Refer to Fuses and relays in the Roadside Emergencies chapter. WARNING: Do not drive your vehicle until you veri...

4. Move the gearshift lever to 1st gear, then slowly release the clutch pedal while slowly pressing on the accelerator. During each shift, the clutch pedal must be fully depressed to the floor.Failure to fully depress the clutch pedal to the floor may cause increasedshift efforts, prematurely wear t...

Parking your vehicle 1. Apply the brake and shift into the neutral position. 2. Fully apply the parking brake, then shift into 1 (First).3. Turn the ignition off. WARNING: Do not park your vehicle in Neutral, it may moveunexpectedly and injure someone. Use 1 (First) gear and setthe parking brake ful...

engage. This is normal and should be no reason for concern. Refer to Shifting to/from 4WD Low for proper operation. 4WD system indicator lights • 4x4 - Momentarily illuminates when the vehicle is started.Illuminates when 4H (4WD High)is engaged. • 4x4 LOW – Momentarily illuminates when the vehicle i...

3. On vehicles equipped with an automatic transmission, place the transmission in N (Neutral); on vehicles equipped with a manualtransmission, depress the clutch. 4. Move the 4WD control to the desired position. • If shifting into 4X4 LOW, wait for the 4WD LOW light in theinstrument cluster to turn ...

If vehicle speed drops more than 10 mph (16 km/h), the speed controlwill cancel automatically. Resume speed with accelerator pedal. If speed control cancels after climbing the hill, reset speed by pressingand holding the SET ACCEL button (to resume speeds over 30 mph[50 km/h]). Automatic transmissio...

HAZARD FLASHER The hazard flasher is located on thesteering column, just behind thesteering wheel. The hazard flasherswill operate when the ignition is inany position or if the key is not inthe ignition. Push in the flasher control and allfront and rear direction signals willflash. Press the flasher...

This switch is located under theright-hand side of the glove box,just above the carpet. To reset the switch: 1. Turn the ignition OFF. 2. Check the fuel system for leaks. 3. If no leaks are apparent, reset the switch by pushing in on thereset button. 4. Turn the ignition ON. 5. Wait a few seconds an...

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A Tan Tan — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Yellow Yellow Yellow ...

Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 32 5A Brake switch (logic) 33 5A Instrument cluster 34 20A Power point 35 15A Power locks Power distribution box The power distribution box islocated in the engine compartment.The power distribution box containshigh-cur...

Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 46A — A/C clutch solenoid 46B — Washer pump relay 47 — PCM relay 48A — Fuel pump relay 48B — Fog lamp relay 51 — Not used 52 — Not used 53 — Not used 54 — Not used 55 — Blower relay 56 — Starter relay * Mini Fuses ** Maxi Fuses O...

5. Check the coolant level. If it is low, look for leaks in the radiator hoses and connections, heater hoses and connections, radiator andwater pump. If you find a leak or other damage, or if coolant is still leaking, stop theengine and call an Authorized Mazda dealer. See Adding coolant in the Main...

3. Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch. Set the parking brake on both vehicles and stay clear of the engine cooling fan and othermoving parts. 4. Check all battery terminals and remove any excessive corrosion before you attach ...

3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’s engine, away from the battery andthe fuel injection system. Do not use fuel lines, engine rocker covers or...

3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables. Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable from the ground metal surface. Note: In...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift or flatbedequipment. Do not tow with a slingb...

CUSTOMER ASSISTANCE (U.S.A. MAINLAND AND HAWAII) Your complete and permanent satisfaction is our business. We are here toserve you. All Authorized Mazda Dealers have the knowledge and thetools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvementre...

6. Your question(s) If you live outside the U.S.A., please contact your nearest MazdaDistributor. CUSTOMER ASSISTANCE (CANADA) Your complete and permanent satisfaction is our business. We are here toserve you. All Authorized Mazda Dealers have the knowledge and thetools to keep your Mazda vehicle in...

REGIONAL OFFICES Regional Offices Areas Covered Mazda Canada Inc. Western Region 8171 Ackroyd Road Suite 2000 Richmond, B.C. V6X 3K1 (604) 303–5670 Alberta, British Columbia, Manitoba, Saskatchewan, Yukon Mazda Canada Inc. Central Region 305 Milner Avenue Suite 400 Scarborough, Ontario. M1B 3V4 1 (8...

STEP 2 If, after following STEP 1, you feel the need for further assistance, pleasecontact your area’s Mazda representative (Indicated on the next page). Please help us by providing the following information: 1. Your name, address, and telephone number 2. Year and model of vehicle 3. Vehicle Identif...

The differences may make it difficult or even impossible for your vehicleto receive satisfactory servicing in other countries. We stronglyrecommend that you NOT take your Mazda outside the United States.However, in the event that you are moving to Canada permanently,Mazda vehicles built for use in t...

Please refer to your manufacturers warranty booklet for moreinformation. REPORTING SAFETY DEFECTS If you believe that your vehicle has a defect which could cause a crash orcould cause injury or death, you should immediately inform the NationalHighway Traffic Safety Administration (NHTSA) in addition...

SERVICE PUBLICATIONS Factory-authorized Mazda service publications are available for ownerswho wish to do some of their own maintenance and repair. When requesting any of our publications through an Authorized MazdaDealer, refer to the chart below. If they don’t have what you need in stock, they can...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as an approved shampoo available from your Mazdadealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can discolor and spot paintedsurfa...

• Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and industrial fallout before repairing paint chips. • Always read the instructions before using the products. ALUMINUM WHEELS AND COVERS Aluminum wheel rims or covers are coated with a clearcoat paint finish.I...

• 4.0L Engine • Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage. PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products areavailable from your dealer. • For routine cleaning, use One Step Wash an...

INSTRUMENT PANEL AND CLUSTER LENS Clean the instrument panel with a damp cloth, then dry with a dry cloth. • Avoid cleaners or polish that increase the gloss of the upper portion ofthe instrument panel. The dull finish in this area helps protect thedriver from undesirable windshield reflection. WARN...

MAZDA CAR CARE PRODUCTS Your Mazda dealer has many quality products available to clean yourvehicle and protect its finishes. These quality products have beenspecifically engineered to fulfill your automotive needs; they are customdesigned to complement the style and appearance of your vehicle. Eachp...

INTRODUCTION Be extremely careful to prevent injury to yourself and others or damageto your vehicle when using this manual for inspection and maintenance. If you’re unsure about any procedure it describes, we strongly urge youto have a reliable and qualified service shop perform the work, preferably...

CHART SYMBOLS I : Inspect and if necessary, correct, clean or replace A Adjust R : Replace L : Lubricate Normal driving service intervals — perform at the months or distancesshown, whichever occurs first. Maintenance Item Maintenance Interval (Number of months or Miles (km), whichever comes first) M...

*5 The California Air Resources Board has determined that the failure toperform this maintenance item will not nullify the emission warranty norlimit recall liability prior to completion of the vehicle’s useful life. Schedule 1 continued Maintenance Item Maintenance Interval (Number of months or Mil...

Special OperatingConditions Replace Engine Oil and Filter Inspect Brake System Replace Fuel Filter Change Automatic T ransmission Fluid Replace Spark Plugs Replace Engine Air F ilter Change Manual T ransmission Fluid Inspect and Lubricate U-Joints Lubricate Front Wheel Bearing (4x2) Change T ransfer...

Working with the engine on • Automatic transmission: 1. Set the parking brake and shift to P (Park). 2. Block the wheels. • Manual transmission: 1. Set the parking brake, depress the clutch and place the gearshift in N (Neutral). 2. Block the wheels. Note: Do not start your engine with the air clean...

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.3L I4 engine 1. Windshield washer fluid reservoir 2. Engine coolant reservoir 3. Engine oil dipstick 4. Transmission fluid dipstick (automatic transmission) 5. Engine oil filler cap 6. Brake fluid reservoir 7. Power distribution box 8. Clutch fluid ...

WINDSHIELD WASHER FLUID Windshield washer fluid Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meets Mazda specification . Refer to Lubricant specifications in this chapter. State or local regulations on vol...

ENGINE OIL Checking the engine oil Refer to the service maintenance section for the appropriate intervals forchecking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan. 3. Set the parking brake and ensure ...

6. Wipe the indicator clean. Insert the indicator fully, then remove it again. • If the oil level is between the MIN and MAX marks, the oil level is acceptable, DO NOT ADD OIL. • If the oil level is below the MIN mark, add enough oil to raise the levelwithin the MIN-MAX range. • 2.3L I4 engineSAE 5W...

• 4.0L SOHC V6 engineSAE 5W-30 • Oil levels above the MAX mark may cause engine damage. Some oilmust be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engi...

Do not use supplemental engine oil additives, oil treatments or enginetreatments. They are unnecessary and could, under certain conditions,lead to engine damage which is not covered by your warranty. Change your engine oil according to the appropriate schedule listed inthe service maintenance sectio...

For longer, trouble-free operation, keep the top of the battery clean anddry. Also, make certain the battery cables are always tightly fastened tothe battery terminals. If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neut...

2. Put the gearshift lever in P (Park), turn off all accessories and start the engine. 3. Run the engine until it reaches normal operating temperature. 4. Allow the engine to idle for at least one minute. 5. Turn the A/C on and allow the engine to idle for at least one minute. 6. Drive the vehicle t...

A 50/50 mixture of distilled water and Mazda Genuine Engine Coolant provides: • maximum cooling system efficiency. • freeze protection down to -34°F (-36°C). • boiling protection up to 265°F (129°C). • protection against rust and other forms of corrosion. • an accurate temperature readout from the e...

Adding engine coolant Use only Mazda Genuine Engine Coolant or a premium enginecoolant that meets a Mazda specification. • DO NOT USE Extended Life Engine Coolant (orange in color). • DO NOT USE a DEX-COOL 威 engine coolant or an equivalent engine coolant. • DO NOT USE alcohol or methanol antifreeze ...

mixture of engine coolant and distilled water to the engine coolant reservoir until the coolant level is at the “FULL COLD” level or withinthe “COLD FILL RANGE” as listed on the reservoir (depending uponapplication). Have your dealer check the engine cooling system for leaks if you haveto add more t...

Severe climates If you drive in extremely cold climates (less than –34° F [–36° C ]): • It may be necessary to increase the coolant concentrationabove 50%. • NEVER increase the coolant concentration above 60%. • Increased engine coolant concentrations above 60% willdecrease the overheat protection c...

counter-clockwise carefully to avoid being burned by hot steam.When there is no steam, keep you face back as you carefully removethe cap and then replenish the coolant to the full line. WARNING: Never remove the coolant reservoir cap while theengine is running or hot. 5. Replace the cap and see if t...

• Extinguish all smoking materialsand any open flames beforefueling your vehicle. • Always turn off the vehicle beforefueling. • Automotive fuels can be harmfulor fatal if swallowed. Fuels such as gasoline and ethanol are highlytoxic and if swallowed can cause death or permanent injury. If fuel issw...

• Place approved fuel container onthe ground. • DO NOT fill a fuel container whileit is in the vehicle (including thecargo area/pickup bed). • Keep the fuel pump nozzle in contact with the fuel container whilefilling. • DO NOT use a device that would hold the fuel pump handle in the fillposition. Fu...

common abbreviation or the appropriate percentage for thatregion. Use of other fuels such as Fuel Methanol may causepowertrain damage, a loss of vehicle performance, and yourwarranty may be invalidated. Fuel quality Many of the world’s automakers approved the World-wide Fuel Charterthat recommends g...

Running out of fuel Avoid running out of fuel because this situation may have an adverseaffect on powertrain components. If you have run out of fuel: • You may need to cycle the ignition from OFF to ON several times afterrefueling, to allow the fuel system to pump the fuel from the tank tothe engine...

If other than Mazda authorized parts are used for maintenancereplacements or for service of components affecting emission control,such non-Mazda parts should be equivalent to genuine Mazda parts inperformance and durability. WARNING: Do not park, idle, or drive your vehicle in dry grassor other dry ...

CHECKING AND ADDING POWER STEERING FLUID • 2.3L I4 engine • 3.0L V6 engine • 4.0L V6 engine DO NOT OVER FILL PO WER ST EE RIN G FL U ID REVIEW COPY 2005 Mazda B Series (mbs) , Owners Guide (post-2002-fmt) (own2002) , Market: USA_English (fus) Maintenance and Specifications 235

Check the power steering fluid. Refer to the service maintenance sectionfor the service interval schedules. If adding fluid is necessary, use onlyMERCON 威 ATF. 1. Start the engine and let it run until it reaches normal operating temperature (the engine coolant temperature gauge indicator will benear...

WARNING: If you use a brake fluid that is not DOT 3, you willcause permanent damage to your brakes. WARNING: Do not let the reservoir for the master cylinder rundry. This may cause the brakes to fail. CLUTCH FLUID (IF EQUIPPED) Check the fluid level. Refer to the service maintenance section for thes...

High fluid level Fluid levels above the safe rangemay cause overheating, shift and/orengagement concerns and internaltransmission damage. If an overfillcondition occurs, excess fluid shouldbe removed by a qualified technician. Checking and adding manual transmission fluid (if equipped) 1. Park the v...

Checking and adding transfer case fluid (if equipped) 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear. 3. Assure the vehicle cannot move. 4. Clean the filler plug. 5. Remove the filler plug and inspect the fluid level. 6. Fluid level should be at the bot...

CHECKING AND ADDING REAR DIFFERENTIAL FLUID 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear. 3. Assure the vehicle cannot move. 4. Clean the filler plug. 5. Remove the filler plug and inspect the fluid level. 6. Fluid level should be at the bottom of the...

Fluid Mazda PartName Application Capacity Power steeringfluid MazdaMERCON 威 ATF All Fill to range ondipstick Transmissionfluid 1 MazdaMERCON 威 ATF 5-speed manual 2.8 quarts(2.65L) 2 MazdaMERCON 威 V ATF 4x2 vehicleswith automaticand 2.3L I4engine 9.9 quarts(9.4L) 3 4x2 vehicleswith automaticand 3.0L ...

Fluid Mazda PartName Application Capacity Fuel tank N/A Regular cab(Short wheelbase) 17 gallons(64.4L) SuperCab 19.5 gallons(73.8L) Transfer CaseFluid MazdaMERCON 威 ATF 4x4 Vehicles 1.25 quarts(1.2L) Front axlelubricant Mazda SAE80W-90Premium RearAxle Lubricant 4x4 Vehicles 3.6 pints (1.7L) Rear axl...

Item Mazda part name or equivalent Automatic transmission (5R44Eand 5R55E) MERCON 威 V ATF 2 Windshield washer fluid Ultra-clear Windshield WasherConcentrate 1 Add 118 ml (4 oz.) of Additive Friction Modifier meeting Mazda specifications for complete refill of Traction-Lok axles. If submerged inwater...

Vehicle identification number (VIN) The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel. (Please note thatin the graphic XXXX isrepresentative of your vehicleidentification number.) Engine number The engine number (the last eight numbers of th...

CELL PHONES Use of cell phones and other devices by driver: WARNING: Use of any electrical devices such as cell phones,computers, portable radios, vehicle navigation or other devicesby the driver while the vehicle is moving is dangerous. Dialing anumber on a cell phone while driving also ties-up the...

A ABS (see Brakes) .....................146 Air bag supplemental restraintsystem ..........................................76 and child safety seats ..............79description ................................76disposal ......................................82driver air bag ............................

manual operation ....................153 Turn signal ..................................38 V Vehicle dimensions ...................246 Vehicle Identification Number(VIN) ..........................................248 Vehicle loading ..........................126 camper bodies ........................1...