Marley FRR10512B - Manual
Marley FRR10512B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING
- Page 4 – Instrucciones de instalación y mantenimiento; ADVERTENCIA; GUARDAR ESTAS INSTRUCCIONES
- Page 5 – IMPORTANTE
- Page 6 – Instructions d'installation et de maintenance; CONSERVEZ CES INSTRUCTIONS; AVERTISSEMENT; MODÈLE
- Page 7 – IMPORTANT
RADIANT
PLUG-IN HEATERS
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered Products. You have made
a wise investment selecting the highest quality product in the heating industry. Please carefully read the installation and
maintenance instructions shown in this manual. You should enjoy years of efficient heating comfort with this product from
Marley Engineered Products... the industry’s leader in design, manufacturing, quality and service.
... The Employees of Marley Engineered Products
Read Carefully -
This instruction sheet contains vital infor-
mation for the proper installation, use, and efficient operation
of the heater described. Carefully read this manual before
installation, cleaning, or operation of the heater. Failure to
adhere to the instructions could result in fire, electrical shock,
death, serious personal injury, or property damage. Save
these instructions and review frequently for continuing safe
operation and instructing future users.
CAUTION - TO REDUCE RISK OF FIRE AND ELECTRIC
SHOCK:
1. Disconnect all power coming to heater at main service panel
before wiring, installing elements, servicing, or disassembling
heater.
2.
The outlet to which the heater is connected must be a 120 volt
AC circuit. The AC circuit must be protected by a 15 or 20 amp
fuse or circuit breaker, and in accordance with the National
Electrical Code and any Local Codes.
3.
This heater is provided with a grounded-type plug and cord as
shown in Fig. 1. An adapter is available for connecting three
blade grounding-type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to
a permanent ground such as a properly grounded outlet box.
The adapter should not be used if a three-slot grounded recep-
tacle is available.
4.
Plug heater power cord directly into the electrical outlet.
Never use an extension cord with this heater.
5. Minimum clearances, as specified, must be maintained. Keep
combustible material, such as boxes, crates, clothing etc., away
from heater.
6.
This heater is not suitable for use in hazardous locations as
described by the National Fire Protection Association (NFPA).
Do not use in areas where paint, gasoline, or other flammable
liquids are used or stored.
7.
This heater is not suitable for use in corrosive, wet or high
humidity areas such as swimming pools areas, etc. For indoor
use only.
8.
This heater is intended for ceiling mounting using chains provid-
ed. Do not recess heater. Elements must be horizontal.
Installation & Maintenance Instructions
SAVE THESE INSTRUCTIONS
WARNING
!
File #E21609
MODEL
NO.
VOLTS WATTS AMPS BTU/HR
FRR10512B
120
500
4.2
1706
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
General These heaters are designed for indoor chain mounting. Not forrecess installation. Elements may be installed prior to mountingunit. DO NOT USE IN OUTDOOR LOCATIONS Mounting Limitation– Observe all minimum dimensions fromceiling, walls, floor and combustible material. Maintain minimum clearanc...
CALENTADORES RADIANTES PARA ENCHUFAR Estimado propietario: ¡Felicitaciones! Gracias por comprar este nuevo calentador fabricado por Marley Engineered Products. Usted ha efectuado unasabia decisión al seleccionar el producto de la más alta calidad en la industria de la calefacción. Por favor lea cuid...
General Estos calentadores están diseñados para montaje interior decadena y no para montar empotrado. Los elementos puedeninstalarse previo al montaje de la unidad. No se debe instalar enlocales exteriores. Limitación de montaje - Observar todas las dimensiones míni-mas desde los cielorasos, piso y ...
