Marley 994 - Manual
Marley 994 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLING FAN BALL HANGER MOUNTING BRACKET; CAUTION; wattage rating of the installation.; CAUTION
- Page 4 – to the fan outlet box prior to installing the ceiling fan.
- Page 5 – DO NOT ATTEMPT; BLADE ASSEMBLY INSTRUCTIONS; Repeat the above procedure for the remaining blades and hardware.; WARNING; ASSEMBLY OF THE BLADES SO AS NOT TO DEFORM OR ALTER THE BLADE ARM.; BE CAREFUL NOT TO SLIDE OR SCRAPE METALLIC PARTS ON BLADE’S SURFACE.
- Page 6 – Repeat the above procedure for the remaining blades.; DO NOT ATTEMPT TO CHANGE FAN DIRECTION WHILE UNIT IS OPERATING!
- Page 8 – IMPORTANT FACTS ABOUT OUR FOAM PACKAGING; HERE ARE SOME OF THE THINGS THAT TRAVEL SAFELY
Inspect contents of carton for possible shipping and handling damage. The blades are a carefully matched set. If one or more
blades from a carton has been damaged, arrange to have all the blades replaced.
BLADES ARE PACKED AS A MATCHED SET AT THE FACTORY IN ORDER TO ENSURE SMOOTH FAN OPERATION.
If more than one fan is being installed, be careful to attach blades removed from one carton to the same fan.
DO NOT MIX BLADES FROM DIFFERENT CARTONS.
FAN
NO. OF
FAN BLADE NO. OF CARTONS
MINIMUM
DISTANCE
FAN
USE CONTROL
MODEL
SERIES
BLADES
SPAN “C”
FAN SHIPPED IN
DIM. A
DIM. B
WEIGHT (LB.)
MODEL NO.
994
GILLESPIE
5
52
1
13.00
12.5
20
9290
994PF
PORCH FAN**
5
52
1
13.00
12.5
20
9290*
* Installer must take adequate precautions to insure water does not enter installation.
Refer to Marley Engineered Products Sales Literature for Light Kit Models available.
WARNING: To reduce the risk of fire or electrical shock, this fan should only be used with the controls listed in Chart 1.
Use only Light Kits marked “Suitable for use in Damp locations” with Damp location fans.
A
B
C
CHART 1
** Damp Location Fan
994 Series
Ceiling Fans
Read Carefully -
These instructions are written to help you prevent difficulties that might arise during installation. Studying
the instructions first may save you considerable time and money later. Observe the following procedures, and cut your instal-
lation time to a minimum. CAUTION - TO REDUCE RISK OF FIRE AND ELECTRIC SHOCK:
1. To avoid possibility of serious injury or electrical shock, the installer must disconnect the electric circuit supplying power
to the fan outlet box prior to installing this fan. Turning the power off at the fan switch or speed control (on / off) is not an
acceptable method to prevent electrical shock.
2. To reduce the risk of fire, electric shock or personal injury, mount fan to an outlet box marked “Acceptable for Fan Support”
and use mounting screws provided with outlet box. (Marley Engineered Products Model 925 HANG-SAFE
TM
Outlet Box is
U.L. Listed for this purpose. U.S. patent number 4,788,383.) Installer must take adequate precautions to prevent water
entry into installation where field installed wiring will be housed.
Installation & Maintenance Instructions
SAVE THESE INSTRUCTIONS
WARNING
!
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
— 2 — INSTALLING FAN BALL HANGER MOUNTING BRACKET See Chart 1 for approximate weight for each model of fan. This weight factor,coupled with the slight fan gyration that can occur during operation, requiresthat a strong ceiling support be provided for attaching the hanger bracketsupplied. Refer to Fi...
— 4 — HANGING FAN MOTOR AND MAKING ELECTRICAL CONNECTIONS Lift motor with ball hanger assembly attached and position into ball hanger bracket, making sure slot in ball hanger locksonto ball hanger bracket’s ball locking stud. Connect motor leads to 120V, 60 cycle supply wiring in accordance withFIgu...
DO NOT ATTEMPT to assemble blades until you have read thoroughly and understand completely all instructions. Toreduce the risk of personal injury, do not bend the blade brackets when installing the brackets,balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating ...
