Marley 3038R - Manual

Marley 3038R

Marley 3038R – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – IMPORTANT SAFETY INSTRUCTIONS; TOOLS AND MATERIALS REQUIRED
  • Page 3 – ATTIC AIR INTAKE AND DISCHARGE; MINIMUM ATTIC DISCHARGE AREAS REQUIRED; FAN
  • Page 4 – CEILING INSTALLATION —; USED WITH AN A3024 SHUTTER ONLY; ” opening on ceiling below where shutter is to be located, or 30
  • Page 7 – SHUTTER INSTALLATION
  • Page 8 – CEILING INSTALLATION — ALL OTHER MODELS; FAN LOCATION & MOUNTING
  • Page 10 – FAN MODEL; Frame inside opening per chart below.; STEP 4 - Now carefully cut hole in ceiling flush with inside of frame.
  • Page 11 – 20V SUPPLY AVAILABLE AT FAN
  • Page 12 – 20V SUPPLY AVAILABLE AT CONTROL; this procedure and installation.
  • Page 13 – FAN SIZE
  • Page 16 – LIMITED WARRANTY; HOW TO ORDER REPAIR PARTS
Loading the manual

READ & SAVE THESE INSTRUCTIONS

MODELS

2438, 3038R & 3638R

WHOLE HOUSE VENTILATORS

CEILING INSTALLATION ONLY

NOTE: MODELS 3038R AND 3638R ARE AVAILABLE

FOR CEILING AND WALL INSTALLATION.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.

INTRODUCTION

Your Whole House Ventilator is designed and engineered to provide years of satisfactory service
in cooling and ventilating your entire house. Hot, humid air is drawn from the living areas and
replaced by cooler outside air. This cooler air may be routed through selected areas of the house
by opening the proper windows and doors. A 3-speed control is supplied. A 12-hour timer, Model
1012A, is also available as an accessory.

The recommended method of installation for 16” O.C. joist construction with the 30” Whole House
fan, Model 3038R, (see pp. 3, 4, 5 & 6) completely eliminates all framing and cutting of ceiling
joists, thus providing the easiest installation available. The shutter for this installation is also
designed to give an attractive flush appearance without cutting the center joist.

LEAVE THIS MANUAL WITH HOMEOWNER.

HOT AIR OUT

HOT AIR OUT

COOL AIR IN

COOL AIR IN

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; TOOLS AND MATERIALS REQUIRED

IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Do not use this fan with any Solid-State Speed Control Device. 2. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manu...

Page 3 - ATTIC AIR INTAKE AND DISCHARGE; MINIMUM ATTIC DISCHARGE AREAS REQUIRED; FAN

(1/2 A X B = AREA Sq. Ft.) GABLE EXHAUST (A X B = AREA Sq. Ft.) EAVE EXHAUST (A X B = AREA Sq. Ft.) GABLE EXHAUST ATTIC AIR INTAKE AND DISCHARGE Your Whole House Ventilator will be discharging a large volume of air into the attic every minute.Provisions must be made to allow this air to escape to th...

Page 4 - CEILING INSTALLATION —; USED WITH AN A3024 SHUTTER ONLY; ” opening on ceiling below where shutter is to be located, or 30

3 CEILING INSTALLATION — MODEL 3038 USED WITH AN A3024 SHUTTER ONLY NO FRAMING OR CUTTING OF JOISTS REQUIRED FOR 16” O.C. JOISTS. FAN LOCATION AND MOUNTING STEP 1 - Fan should be located in center of house, preferably in hallway or corridor. This will allow air tobe drawn from all parts of living sp...

Other Marley Models

All Marley Other