Makita TM3000C - User Manual
Makita TM3000C Oscillating Tool – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; Symbols
- Page 4 – SAVE THESE INSTRUCTIONS.
- Page 5 – FUNCTIONAL DESCRIPTION; Switch action; ASSEMBLY
- Page 6 – OPERATION; Cutting, sawing and scraping
- Page 8 – Makita Corporation
1
ENGLISH (
O
rigina
l in
st
ruct
ions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT:
Read Before Using.
Multi Tool
TM3000C
012849
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Makita TM3000C
Summary
2 ENGLISH (Original instructions) SPECIFICATIONS Model TM3000C Oscillation per minute 6,000 - 20,000 (min -1 ) Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total) Overall length 275 mm without dust extraction attachment 1.4 kg Net weight with dust extraction attachment 1.5 kg Safety class /II • Due to...
4 4. Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory. 5. Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses. 6. Avoid cutting nails. Inspect wor...
5 FUNCTIONAL DESCRIPTION WARNING: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Failure to switch off and unplug the tool may result in serious personal injury from accidental start-up. Switch action 1 012768 CAUTION: • Before pluggin...
