Makita EX2650LH - Manual
Makita EX2650LH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – epair
- Page 3 – Note
- Page 5 – • Receive Gear case assembly with the U-shape table of Arbor press,
- Page 7 – CHECK OF PLUG CAP
- Page 10 – • slackened • hardened • worn / debased
- Page 11 – Breather pipe
- Page 12 – Spark arrester
- Page 13 – must have 180° angle when they fixed into the grooves on the piston.; 216 on the Crank case side.; Apply 4-stroke oil to the contact surface of Piston and Cylinder.; Clearances should not be overlapped each other.
- Page 14 – • Align the marking on Flywheel with the marking on Ignition coil. (; and Rocker arms.
PRODUCT
P 1/ 1
4
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
S
tandard equipment
EX2650LH
Multi Function Power Head
Model EX2650LH
loaded with 25.4mL Makita 4-stroke engine is
a power head designed for versatile garden and agricultural applications.
The following advantages make this product ideal for a wide range
of garden and agricultural applications:
• Split system of Power head and Attachment provides easier mobility.
• Clean 4-stroke engine equipped with our unique multi-position
engine lubrication system that enables the engine to be inclined
to any angle with no emission of white smoke and smell of
burning engine oil even during continuous operation
• Multi-tool system consisting of the power head and versatile
optional attachments
4.6 (10)
Note:
The standard equipment for the tool shown above may vary by country.
Shoulder harness with single shoulder strap
.............................................. 1
Socket wrench 16-17
................................................................................. 1
Hex wrench 4 .............................................................................................. 1
Accessory bag
............................................................................................ 1
Oil set (oil bottle containing 80mL engine oil)
......................................... 1
O
ptional accessories
Brush cutter attachment
String trimmer attachment
Pole saw attachment
Pole hedge trimmer attachment
Cultivator attachment
Coffee harvester attachment
Carrying bag
242 (9-1/2)
975 (38-3/8)
Dimensions: mm (")
323 (12-3/4)
*
1
Width (W)
Height (H)
Length (L)
241 (9-1/2)
Loop handle
No
*
3
L
Fuel tank capacity: mL (US oz)
Engine
Displacement: cm³ (cu.in.)
Fuel
Type
Starting system
Handle style
Engine oil
Carburetor
Net weight
*
4
: kg (lbs)
*2:
Brazil: 25E gasoline
*3:
However, equipped with mechanical decompression
*4:
Dry weight
Rapid start
Max. torque: N.m
Straight unleaded gasoline
*
2
600 (20.3)
25.4 (1.55)
Max. output: kW
0.77 (at 7,000 min.
ˉ
¹)
1.1 (at 5,500 min.
ˉ
¹)
4-stroke
Recoil starter, with mechanical decompression
SAE10W-30 oil
in the class SF or higher of API Classification
Diaphragm
Primer pump
Yes
Clutch
Yes
*1
: for the countries where Barrier bar
is required by the standards of
brushcutter.
W
H
T
ECHNICAL INFORMATION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [4] DISASSEMBLY/ASSEMBLY [4]-1. Warning Obey the following instructions in advance before repairing . • Wear gloves. • Keep the cover on the blade other than a trial of engine running. • Cool down engine en...
[4] DISASSEMBLY/ASSEMBLY [4]-2. Engine and Shaft DISASSEMBLING ASSEMBLING (1) Disconnect lead wire and grounding wire by removing each connector after removal of Air cleaner cover. ( Fig. 1 ) (2) Remove Control cable from Insulator as follows: • Loosen the nuts of Control cable so as to relax the ho...
R epair [4] DISASSEMBLY/ASSEMBLY [4]-5. Gear case assembly DISASSEMBLING ASSEMBLING (1) According to the clause of [4]-3 , Remove Gear case assembly. (Refer to Figs. 7, 8 and 9 ) (2) Remove M8x10 + Hex bolt that is the stopper of Grease inlet on Gear case set. ( Fig. 15 ) (3) Remove Retaining ring R...
