Makita EK7651H - Manual
Makita EK7651H – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – epair
- Page 3 – Cylinder block; Note
- Page 4 – : Another Ball bearing 6203LLU
- Page 6 – Important; Reel
- Page 10 – : • Check the components’ shrinkage, hardening or breakage due to aged; The shape edges
- Page 11 – • Align the ends of Sponge sleeve 9 and Breather on Tube 3-190. (; Adjust H needle through the hole
- Page 12 – • Tube 3-170 with Clamp to Rocker cover
- Page 14 – Hexalobular
- Page 15 – Exhaust; Use Cotter removal
- Page 17 – Oil ring
- Page 18 – socket
- Page 19 – Fuel is extremely flammable and fuel vapors are explosive.; Application
PRODUCT
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
P 1/
19
Models No.
EK7650H, EK7651H
Description
Power Cutters 305mm (12"), 355mm (14")
Models EK7650H and EK7651H are the world’s first 4-stroke power cutters.
Their main features are:
• Low fuel consumption, low noise and clean exhaust emission achieved
by 4-stroke engine
• Easy start-up with Automatic decompression, Primer pump and
On/off choke combination switch with automatic half-throttle lock
• Low-vibration system with damper springs to absorb vibration from
engine to integrated front and rear handles.
Each wheel diameter is:
305mm (12") for model EK7650H
355mm (14") for model EK7651H
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
310 (12-1/4)
780 (30-3/4)
EK7651H
435 (17-1/8) 455 (17-7/8)
761 (30)
EK7650H
355 (14)
1.1 (37.2)
75.6 (4.6)
3.0 (at 7,500 min.
ˉ
¹)
Fuel tank capacity: L (US oz)
Fuel consumption: L/h (US oz/h)
Wheel diameter:
mm (")
Engine
Displacement: cm³ (cu.in)
Max. output: kW
4.6 (at 5,500 min.
ˉ
¹)
Max. torque: N.m
4-stroke
Specifications
EK7651H
Model
Type
Decompression valve
Rapid start
(Spring-assisted recoil starter)
Starting
system
122 (4-13/16)
Max. cutting depth:
mm (")
Dry weight
*
2
: kg (lbs)
*1
Some countries: E10 or E25 gasoline
*2
without cutting wheel
12.9 (28.4)
12.7 (28.0)
S
tandard equipment
Note:
The standard equipment for the tool shown above may vary by country.
Tool kit (Socket wrench 13-16, Hexalobular wrench, Slotted screwdriver and Tool bag)
Oil bottle (containing 220ml engine oil)
Water supply kit
Adapter ring (for some countries only)
305 (12)
EK7650H
97 (3-13/16)
1.7 (57.5)
No
Automatic (
Mechanical)
Engine oil
Fuel
Straight unleaded gasoline
*
1
SAE10W-30 oil
in the class SF or higher of API Classification
O
ptional accessories
Filter set
Trolley kit
Oil bottle set (10 bottles of 220ml engine oil)
Diamond wheel
Abrasive cut-off wheel
T
ECHNICAL INFORMATION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
[1] NECESSARY REPAIRING TOOLS Description Code No. Use for Retaining ring pliers ST-2N for External ring 1R003 press-fitting Ball bearing 6203LLU into Cutting device Bearing setting pipe 25-17.2 1R030 assembling Clutch complete to Crankshaft Torque wrench shaft 20-90N·m 1R223 CAUTION: Repair the mac...
Description Item No. Use for Amount a little a little a little Lubricant 4-cycle Engine oil (API grade SM class) 4-cycle Engine oil (API grade SM class) Makita grease N No. 2 [3] LUBRICANT/ ADHESIVE APPLICATION Retainer (2 pcs.) Contact surface with the holes of Rocker arm assemblyContact surface wi...
Hood section V belt 5-800 Cutting device [4] DISASSEMBLY/ASSEMBLY [4]-1. V-belt 5-800, Cutting device R epair P 4 / 19 (1) Loosen two M8 Hex nuts slightly with Wrench 13-16 of a standard accessory. ( Fig. 2 ) (2) Release the tension on V-belt 5-800 by turning M6 Tensioning screw counterclockwise wit...
