Makita AC310H - Manual
Makita AC310H – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – epair; Note
- Page 3 – Unloading valve
- Page 4 – Motor cover A complete
- Page 7 – iring diaphragm; White or blue
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
O
ptional accessories
AC310H
Air Compressor
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
476 (18-3/4)
507 (20)
375 (14-3/4)
W
L
H
This model has been launched as Makita first HP(high pressure) air compressor.
1,500W high output motor generates maximum 2.58MPa air flow performance to
exploit the full potential of HP pneumatic tools such as nailer, stapler, screwdriver
and impact driver.
Four couplers are on the front. The two couplers are for HP pneumatic tools,
the others are for RP (regular pressure) pneumatic tools.
Guard with seven bumpers is equipped to protect their couplers and body.
P 1/
7
PRODUCT
T
ECHNICAL INFORMATION
Continuous Rating (W)
Voltage (V)
Cycle (Hz)
Input
Output
Max. Output (W)
120
220-240
13.0
7.0
60
50
---
1,800
1,500
1,500
Current (A)
875
875
Model No.
Specifications
Weight according to EPTA procedure: kg (lbs)
Power supply cord: m (ft)
Tank capacity
Continuous rating output: W
Rated amperage for North America: A
Motor
Horsepower: HP
Type
RPM: min
-1
2.5
Air flow performance: L/min at 0.75MPa
90
Noise: dB(A)
tested according to outdoor noise directive
Motor thermal overload protector
Insulation
Max air pressure in Tank: Mpa (psi)
Carrying tool
Air hose assembly
Hose reel
None of Standard equipment
Note: Standard equipment may vary by countries.
Air pressure in Tank when restarting: Mpa (psi)
for high pressure
for regular pressure
Operating air pressure: MPa (psi)
AC310H
2.8 (410)
2.3 (330)
Air pressure
through Coupler: Mpa
0 ~ 2.58
0 ~ 0.91
1,500
4-pole induction motor
90
Yes
by grounding
6.2 (1.6)
1.8 (5.9)
36 (79.4)
0.98~2.26 (140 ~ 320)
13
1,700(60Hz) / 1,420(50Hz)
S
tandard equipment
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
P 2 / 7 R epair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [1] NECESSARY REPAIRING TOOLS [2] REPLACING[2]-1. Filter [2]-2. Filter Fig. 1 Fig. 2 Fig. 4 Fig. 5 Fig. 3 Code No. Description Use for 1R230 1/4" Hex. shank bit for M6 Removing M6 Hex so...
P 3 / 7 R epair [2] REPLACING[2]-3. Unloading valve Fig. 6 Fig. 7 Fig. 8 1) Loosen M8 Ring nut with Spanner 17, then remove Pipe 8 from Elbow 8-R1/4. ( Fig. 6 ) 2) Loosen four M5x10 Pan head screws, then remove Front panel assembly from Frame complete. ( Fig. 7 ) 3) Loosen two Ring nuts 6 with Spann...
P 4 / 7 R epair Fig. 9 Fig. 10 Fig. 11 1) After removing Side panel with Side panel cover, loosen two Ring nut 10 and remove Pipe 10. (Fig. 9) 2) Loosen nine 4x18 Tapping screws, then separate Motor cover A complete from Motor cover C. (Fig. 10) 4x18 Tapping screws (9pcs.) 3) Lift up and slide Motor...
