Lucent Technologies CIB 3020 - Manual

Lucent Technologies CIB 3020 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 4 – Installing the 10-Basic Telephone Module; WARNING: Before removing or inserting modules in the control unit; the slot labeled 24, you will also need an additional power supply.)
Page 5 – circuit board are in the top and bottom grooves of the slot.; NOTE: If you have any difficulties, remove the 10-Basic Telephone; Module and check the connectors at the back of the module and at
Page 6 – Removing the 10-Basic Telephone Module; until it releases Slowly slide the module out of the slot; Administering the Basic Telephones; administration manual for further instructions.; FEATURE MODULE 1; have access to all the Iines they need to use.; FEATURE MODULE 2
Page 7 – FEATURE MODULES 4 AND 5; Basic Telephones” for instructions,
Page 8 – Lucent Technologies; Copyright © 1996, Lucent Technologies

Loading the manual

Lucent Technologies

Bell Labs Innovations

CIB 3020

(506A2)

10-Basic Telephone Module (61311)

(105211049)

CIB 3020

Comcode 103983946

Issue 4

January 1997

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 4 - Installing the 10-Basic Telephone Module; WARNING: Before removing or inserting modules in the control unit; the slot labeled 24, you will also need an additional power supply.)

Installing the 10-Basic Telephone Module WARNING: Before removing or inserting modules in the control unit or expansion unit, be sure to turn the power switches to the off posi-tion in both units. This module can be mounted in slots labeled 10 or 11 in the control unit or slots labeled 21, 22, 23 or...

Page 5 - circuit board are in the top and bottom grooves of the slot.; NOTE: If you have any difficulties, remove the 10-Basic Telephone; Module and check the connectors at the back of the module and at

4. Align the module in the slot (Figure 3), making sure the edges of the circuit board are in the top and bottom grooves of the slot. Figure 3 Installing the Module (Typical) 5. Slide the module into the slot until the latch at the bottom of the module catches at the base of the slot. With one hand,...

Page 6 - Removing the 10-Basic Telephone Module; until it releases Slowly slide the module out of the slot; Administering the Basic Telephones; administration manual for further instructions.; FEATURE MODULE 1; have access to all the Iines they need to use.; FEATURE MODULE 2

Removing the 10-Basic Telephone Module To remove the module from the control unit or expansion unit, turn the power switches to the off position, disconnect the modular cords from the 10-Basic Telephone Module and press down firmly on the latch at the module’s base until it releases Slowly slide the...