Lucent Technologies 20DS - Manuals

Page 2 - Contents

Page 2 - Contents INDeX 20DS User's Guide 38DHB0002UKCN - Issue 3 March 2000 Contents Introduction ..................................................................................3 Introduction to the 20DS...................................................................................... 3 The ...

Page 3 - Introduction; Introduction to the 20DS

Introduction – Page 3 38DHB0002UKCN – Issue 3 March 2000 INDeX 20DS User's Guide Introduction Introduction to the 20DS This guide is for the INDeX 20DS used on the INDeX telephone systemoperating under Software Release level 9.0. Your System Manager willbe able to tell you which Software Release you...

Page 4 - The BLF Lamps

Page 4 - Introduction INDeX 20DS User's Guide 38DHB0002UKCN – Issue 3 March 2000 The BLF Lamps The DSS keys incorporate dual-colour BLF lamps. These show thestatus of the number stored under the DSS key. Red BLF Lamp Signals:– Slow Red Flash: A call on a line set under the key has been parked. To un...

Page 5 - Using the 20DS; Notes; Setting up the DSS Keys.

Using the 20DS – Page 5 38DHB0002UKCN – Issue 3 March 2000 INDeX 20DS User's Guide Using the 20DS Notes Once associated with a phone, the 20DS provides that phone with anadditional 42 DSS keys. This section gives examples of some of thefunctions of the keys. To check the unit is associated:1. Press ...

Page 6 - Speed Dials

Page 6 - Using the 20DS INDeX 20DS User's Guide 38DHB0002UKCN – Issue 3 March 2000 Speed Dials To dial a speed dial:1. Press the DSS key under which the speed dial store is set. Holding Calls - Solid Green To hold a call:1. Press HOLD on your phone.To retrieve a held call:1. If the held line or exte...

Page 7 - Transferring Calls

Using the 20DS – Page 7 38DHB0002UKCN – Issue 3 March 2000 INDeX 20DS User's Guide Transferring Calls After answering a call, you can transfer it to any extension (or group ofextensions) set under a DSS key. To make an unannounced transfer:1. Whilst talking to the caller, press the DSS key for the r...

Page 8 - Setting Up the 20DS; Associating the 20DS

Page 8 - Setting Up the 20DS INDeX 20DS User's Guide 38DHB0002UKCN – Issue 3 March 2000 Setting Up the 20DS Associating the 20DS Before using the 20DS, you must associate it with an INDeX terminal.You can associate several 20DS's with the same terminal if required (toreassociate a 20DS with a differ...

Page 9 - Programming the DSS Keys; Reassociating a DSS Unit

Setting Up the 20DS – Page 9 38DHB0002UKCN – Issue 3 March 2000 INDeX 20DS User's Guide Programming the DSS Keys DSS Keys - Alias:- Line keys.- F Keys.- Repertory dialling. You can program each DSS key with a line, extension or group directorynumber. Once programmed, the key's BLF lamp displays the ...

Page 10 - DSS Key Label; Label Template

Page 10 - Setting Up the 20DS INDeX 20DS User's Guide 38DHB0002UKCN – Issue 3 March 2000 DSS Key Label Next to each column of DSS keys is an area in which you can labeleach key. You can remove the label cover to write on the card below. To remove the label cover:1. Insert a fine but not sharp point ...

Page 11 - Testing the Keys & Lamps

Setting Up the 20DS – Page 11 38DHB0002UKCN – Issue 3 March 2000 INDeX 20DS User's Guide Testing the Keys & Lamps The 20DS has a test cycle that checks all it's lamps and keys. You cando this without affecting the unit's programming (i.e. your phone andDSS key settings). To test the keys and lam...

Page 12 - Index

INDeX 20DS User's Guide 38DHB0002UKCN – Issue 3 March 2000 Announced transfer ............... 7Answering calls ..................... 5Associating the unit ............... 8Calls Answer ................................ 5Make ................................... 5 Card insert .............................