Lucent Technologies 555-230-128 - Manual

Lucent Technologies 555-230-128

Lucent Technologies 555-230-128 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
Page: / 144

Table of Contents:

  • Page 3 – Issue 3; Page iii; Contents; Contents
  • Page 4 – Page iv; Installation Completion and Cable Pinouts
  • Page 5 – Page v; References; IN; Index
  • Page 6 – Page vi
  • Page 7 – Page vii; About This Book; Conventions Used in This Book; login; Tec hnic al Monthly: Referenc e Guid e for Circ uit Pac k
  • Page 8 – Page viii; p arentheses
  • Page 9 – Check Customer’s Order; Install and Cable the Cabinets; Check Customer ’s Order; Direc t all short-ship p ed rep orts to the nearest MSL. Contac t the; Unpack and Inspect; Verify the eq uip ment rec eived . See
  • Page 10 – Eq uip ment c omc od es are listed in; Equipment Packed with the CMC Cabinet
  • Page 11 – Comcodes for CMC; Comcodes for Release 6.1 and Later CMC; Continued on next page
  • Page 12 – Comcodes for Release 6.1 and Later CMC —; Continued; Comcode
  • Page 14 – Install the System Cabinets; Set the Carrier Address ID — All Cabinets; Proc eed to either; Figure Notes; Carrier A switc h setting s
  • Page 15 – Floor-Mount the Cabinet; Typical Floor Mount Installation; ‘‘Cab le the System’’ on p ag e 1-23
  • Page 16 – Wall-Mount the Cabinets; horizontally onto the wall. See; or 3 Vertically Mounted Cabinets; vertic ally onto the wall. See
  • Page 17 – Install Cabinet A — Wall-Mount; Left Panel Used as Mounting Template; See
  • Page 18 – Typical Wall-Mount Installation; Drill two lower mounting holes using the c ab inet as a temp late.; Be sure the rig ht b ottom safety sc rew is in p lac e and tig ht.
  • Page 19 – Install 2 or 3 Vertically Mounted Cabinets; Typical Multi-Cabinet Installation; Sec urely tig hten the should er sc rews and safety sc rews.
  • Page 20 – Typical 3-Cabinet Installation; Sec ond sheet of p lywood
  • Page 21 – Install Left and Right Panels — Wall-Mount; Left and Right Panel Installation; Alig n the c utouts in the p anels with the c ab inet hing es.
  • Page 22 – AC Power and Ground; Check AC Power; Measure the AC voltag e b etween the hot and neutral sid e of the
  • Page 23 – Approved Grounds; Grounded Building Steel
  • Page 24 – APPROVED FLOOR GROUNDS; Build ing steel; Uninterruptible Power Supply; req uirements of all c ab inets:
  • Page 25 – CMC Cabinet Power Switch; CMC Power Supply; Connect Cabinet Grounds and Other Grounds; The following ad d itional g round ing req uirements must b e met:
  • Page 27 – Install the Ground Block; Mount the g round b loc k as shown in; Ground Block Installation to Right Panel
  • Page 28 – Typical Cabinet Grounding; g round wire
  • Page 29 – Install Coupled Bonding Conductor; ) wire tie wrap p ed to the exp osed; Connect and Route Cabinet AC Power Cords; Be sure the c irc uit b reakers at the AC load c enter are
  • Page 30 – Routing AC Power Cords to a Power Distribution Unit; Cab inet AC p ower c ord
  • Page 31 – Cable the System; System Cable Connections; Connec t the Proc essor Interfac e Cab le to slot 1 of Cab inet A. See
  • Page 32 – Cable the Multi-Cabinet System — Wall-Mount; Route the TDM/LAN b us c ab les throug h the c ab le troug h.; TDM/LAN Bus Cables and Terminators
  • Page 33 – Vertically and Horizontally Mounted System; Only 1 horizontal TDM/LAN Bus c ab le is allowed p er system. See
  • Page 34 – Install Main Distribution Frame and External Modem; Install the MDF; ‘‘Proc essor Interfac e Cab le
  • Page 35 – Cable the MDF and Modem; Proc essor interfac e c ab le (c onnec t P2
  • Page 36 – Typical Top-Mount MDF Cable Routing; MDF mounting frame.; Connec t c ab le 1 to slot 1
  • Page 37 – Install Equipment Room Hardware; DEFINITY Communic ations System Generic 1 and Generic 3 Main; Cross-Connect the Cabinets to the MDF; Circuit Packs and Circuit Modules
  • Page 38 – Circuit Packs and Circuit Modules —; Name
  • Page 41 – Circuit Pack Installation; p ort
  • Page 42 – Circuit Pack Slot Loading; Install the TN798 Proc essor c irc uit p ac k in slot 1 of Cab inet A.
  • Page 43 – Control Carrier Slot Layout; Line c irc uit p ac k slots
  • Page 44 – Circuit Pack Installation Order (Loading)
  • Page 45 – Cross-c onnec t the p ort c irc uit p ac ks to the MDF. See; Example MDF Connections
  • Page 46 – Install Sneak Fuse Panels; Model 507B Sneak Fuse Panel; Sneak c urrent p rotec tor
  • Page 48 – is a p inout of the c ab le wiring and assoc iated fuse numb ers.; Sneak Fuse Connector Pinout
  • Page 49 – Label the Main Distribution Frame; shows the g rap hic symb ols used on the sup p lied lab els for the; Label Graphic Symbols and Nomenclature; Floor and b uild ing id entific ation
  • Page 50 – Install and Set Up the Management Terminal; into the TERM c onnec tor (J3) on the Proc essor Interfac e Cab le. See
  • Page 51 – Rear Panels on Management Terminals; Set Up the Management Terminal; 15GBCS-2 Terminal User’s Guid e; Rear p anel of 715 BCS terminal
  • Page 52 – Remotely Connect Terminal; Typical Connections to Remote Devices
  • Page 53 – Set Ringing Option; Ringing Option Selection; Ring ing op tion switc h
  • Page 54 – Activate and Administer the System; Power Up System; Fully seat the 650A Power Unit in the c ab inet.; Multi-Cabinet Installations; Power up the p ort c arriers first and the c ontrol c arrier last.; System Administration
  • Page 55 – Log into the System; DEFINITY Enterp rise; in; Change Customer Options; and Feature Desc rip tion
  • Page 56 – Set Country Options; Companding Mode; Typical System Parameters Country-Options Screen; Analog Ringing Cadence:
  • Page 57 – Chap ter 2, ‘‘Installation Comp letion; Country Codes
  • Page 58 – Change Craft Password; must; Sc reen; Typical Change Password Screen; Reenter Login’s Password
  • Page 59 – Set Date and Time; Typical Date and Time Screen; Tab le; English Day of the Week Names
  • Page 60 – English Month Names
  • Page 61 – Circuit Pack Administration; DEFINITY Enterp rise Communic ations Server; Set System Maintenance Parameters
  • Page 62 – Administer the Attendant Console; ‘‘Save Translations’’; DEFINITY Ap p lic ation Notes; Save Translations; DEFINITY Enterp rise Communic ations Server Release 6
  • Page 63 – Install and Wire Telephones and Other Equipment; Telephone Connection Examples
  • Page 64 – -wire d ig ital line c irc uit p ac k
  • Page 65 – Connect Adjunct Power; 00B2 Adapter Connecting to a Modular Plug; To ind ivid ual p ower unit (suc h as
  • Page 66 – Analog Station or 2-Wire Digital Station Example; 500-Type Analog Telephone Wiring; Choose a p ort c irc uit on the p ort c irc uit p ac k, for examp le p ort 3.
  • Page 67 – Analog Tie Trunk Example; Analog Tie Trunk Wiring; Chap ter 2, ‘‘Installation Comp letion and Cab le Pinouts’’
  • Page 68 – Digital Tie Trunk Example; Digital Tie Trunk Wiring; ac c ord ing to; DS1 interfac e c irc uit p ac k, p osition
  • Page 69 – DS1 Tie Trunk Example; C6C connector cable; Collocated DS1 Tie Trunks; Pinout of C6F Cable; Green
  • Page 70 – DS1 Tie Trunks Using T1 Channel Service Unit; shows a DS1 tie trunk c onnec ted to an external T1 Channel Servic e; Typical Connections to Channel Service Unit; To DS1 tie trunk c irc uit p ac k
  • Page 71 – shows 3-p air and 4-p air mod ularity from the p ort c irc uit p ac k to the; Port c irc uit p ac k
  • Page 72 – Adjunct Power Connections; Example Adjunct Power Connections
  • Page 73 – Local and Phantom Power; A c onsole’s maximum d istanc e from its auxiliary p ower sourc e is:; Attendant Console Cabling Distances; Feet Meters
  • Page 74 – Install Attendant Console — Optional; mod ular c ord to the information outlet.; Dual Wiring of 2-Wire and 4-Wire Endpoints; the b ottom of the 26B1 Selec tor Console.; DEFINITY Enterp rise Communic ations
  • Page 75 – Connect External Alarms and Auxiliary Connections; Alarm Input; inp ut; Alarm Output; outp ut
  • Page 76 – Emergency Transfer and Auxiliary Power; Telephone Pin Designations; p rovid es p ort c irc uit p ac k and telep hone p in d esig nations.; Emergency Transfer and Auxiliary Power
  • Page 77 – CAMA/E911 Installation; Configuration; Insert the TN429C CO c irc uit p ac k in any availab le p ort slot.; Administration Setup; At the p romp t, typ e add trunk next and p ress
  • Page 78 – field , enter the d esired trunk ac c ess c od e.
  • Page 79 – On the Group Memb er Assig nments sc reen, in the
  • Page 80 – ARS Digit Analysis Table; On ARS Dig it Analysis Tab le sc reen ap p ears. In the
  • Page 81 – Rte Pat; field , enter emer and p ress; b e c hang ed in the examp le b elow, the route p attern is 11) and p ress; FRL
  • Page 82 – b e c hang ed in the examp le b elow, the route p attern is 12) and p ress; g roup numb er and p ress; At the p romp t, typ e change cama-numbering and p ress
  • Page 83 – CAMA Numbering Format form; System; Ext Len
  • Page 84 – Calling Party; field , typ e none and p ress; Typ e Save Translation and p ress
  • Page 85 – Install the BRI Terminating Resistor; #5ESS Switc h Integ rated Servic es Dig ital Network Customer
  • Page 86 – Terminating Resistor Adapter; shows an 8-p in 440A4 terminating resistor ad ap ter. The ad ap ter has
  • Page 87 – shows the wiring of the 110RA1-12. Three rows of 110D-4 c onnec tor; Only first c irc uit shown to all 12
  • Page 88 – shows the wiring c onnec tions for the 110RA1-12 terminal b loc k. The; Typical Installation of Terminating Resistor Block; Part of terminating resistor b loc k
  • Page 89 – Install Multi-point Adapters; Wiring Diagram of BR851-B
  • Page 90 – The 367A ad ap ter p rovid es fanout for up to 7 terminals. See; Wiring Diagram of 367A Adapter
  • Page 91 – Basic Multi-point Installation Distances; Basic Multi-point with One Work Location
  • Page 92 – Install Off-Premises Station Wiring; b loc k c onnec tor assoc iated with the g reen row in Step 2.; Analog Off-Premises Stations; shows the c onnec tions for 1 to 8 off-p remises analog telep hones.
  • Page 93 – Connections for 1 to 8 Out-of-Building Analog Telephones; Loc ally eng ineered c ab les
  • Page 94 – shows the c onnec tions for up to 24 off-p remises analog telep hones.; Connections to 24 Out-of-Building Telephones
  • Page 95 – Circuit Protectors; c annot
  • Page 96 – lists the; Digital Voice Circuit Protectors; ITW Linx Only
  • Page 97 – Install Emergency Transfer Unit and Associated Telephones; Refer to; Install the Emergency Transfer Panel
  • Page 98 – Verify d ial tone is p resent at eac h trunk c irc uit.; 08A Emergency Transfer Panel; Loc ate the c irc uit start selec tion switc hes. See; 08A emerg enc y transfer p anel
  • Page 100 – Pin Assignments for 25-Pair Connector on 808A
  • Page 101 – Chec k the system for emerg enc y transfer op eration as follows:; Pin Assignments for 25-Pair Connector on 808A —; Pin
  • Page 102 – Connections for Telephone Used for Emergency Transfer
  • Page 103 – Connections for Telephone Used for Emergency Transfer and as
  • Page 104 – Install Telephone for Power Transfer Unit
  • Page 105 – Connect Modem to Telephone Network; Pinout of Network Jack; Unused; Pin 1 of network jac k
  • Page 106 – External Modem Option Settings; maintenance and p ress; U.S. Robotics Model 839 External Modem Switch Settings; Switch
  • Page 107 – shown in; when the mod em field s are p rop erly ad ministered .; Release 6 CMC Modem Fields
  • Page 108 – Release 6 CMC Modem Fields —; Field
  • Page 109 – Installation Completion and Cable; Perform System Administration; Resolve Alarms; ‘‘Power Sup p ly LED Ind ic ations’’ on p ag e 2-4
  • Page 110 – Enable Alarm Origination to INADS; External Modem Installed; Place a Test Call
  • Page 111 – Set Neon Voltage — Ring Ping; Set Neon Voltage; ‘‘Set Ring ing Op tion’’ on p ag e 1-45; neon; messag e waiting lamp s or if LED messag e; Setting the Neon Voltage; Chec k for “ ring p ing ” (sing le ring p ulse) eac h time the lamp flashes
  • Page 112 – Installation Completion; Power Supply LED Indications; LED and Alarm Conditions
  • Page 113 – TN760D Tie Trunk Option Settings; Signaling Formats for TN760D
  • Page 114 – TN760D Tie Trunk Circuit Pack (Component Side)
  • Page 115 – TN464E/F Option Settings; and; Option Switch Settings on TN464E/F; Twisted p air
  • Page 117 – Connector and Cable Diagrams — Pinout Charts; Lead and Color Designations
  • Page 118 – Lead and Color Designations —; Pin Color
  • Page 119 – shows the p inout for the Proc essor Interfac e Cab le.; Processor Interface Cable Pinout; EXTALMA
  • Page 121 – LO; Port Circuit Pack Lead Designations —
  • Page 122 – shows the p inouts for the TN2185 ISDN-BRI 4-wire S Interfac e.
  • Page 123 – shows the p inout for the TN793 24-Port Analog Line c irc uit p ac k.
  • Page 129 – Related Documents; BCS Prod uc ts Sec urity Hand b ook
  • Page 130 – How to Order Documentation; Business Communic ations; How to Comment on This Book; and Test for Comp ac t Mod ular Cab inets,; Where to Call for Technical Support; Telephone Number
  • Page 131 – Trademarks
  • Page 132 – Standards Compliance; ECMA
  • Page 133 – Electromagnetic Compatibility Standards; EN50082-1, Europ ean Generic Immunity Stand ard
  • Page 134 – European Union Standards; The “ CE” mark is ap p lied to the following Release 6 p rod uc ts:
  • Page 135 – Federal Communications Commission Statement
  • Page 136 – Means of Connection; If the terminal eq uip ment (DEFINITY; Manufacturer’s Port Identifier
  • Page 137 – Numerics; to
Loading the manual

DEFINITY

®

Enterprise Communications Server

Release 6
Installation and Test for Compact Modular
Cabinets

555-230-128
Comcode 108215609
Issue 3
May 1998

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Issue 3; Page iii; Contents; Contents

DEFINITY Enterprise Communications Server Release 6Installation and Test for Compact Modular Cabinets 555-230-128 Issue 3 May 1998 Contents Page iii Contents Contents iii About This Book vii ■ Conventions Used in This Book vii 1 Install and Cable the Cabinets 1-1 ■ Check Customer’s Order 1-1 ■ Corre...

Page 4 - Page iv; Installation Completion and Cable Pinouts

DEFINITY Enterprise Communications Server Release 6Installation and Test for Compact Modular Cabinets 555-230-128 Issue 3 May 1998 Contents Page iv ■ Activate and Administer the System 1-46 Power Up System 1-46 System Administration 1-46 ■ Install and Wire Telephones and Other Equipment 1-55 Install...

Page 5 - Page v; References; IN; Index

DEFINITY Enterprise Communications Server Release 6Installation and Test for Compact Modular Cabinets 555-230-128 Issue 3 May 1998 Contents Page v A References A-1 ■ Related Documents A-1 ■ How to Order Documentation A-2 ■ How to Comment on This Book A-2 ■ Where to Call for Technical Support A-2 ■ S...

Other Lucent Technologies Models

All Lucent Technologies Other