Lucent Technologies 553B - Manual

Lucent Technologies 553B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – M e m o r y M o d u l e; Release 2 System Manual.
Page 3 – Make sure the power cord is unplugged and the; power switch on the control unit is set to Off before you insert or; remove any modules. You risk damage to the system and the; two top corner tabs and putting the top away from the control unit
Page 4 – Loosened screw; To Insert the new memory module, first grasp its plastic handle on
Page 5 – the control unit to On.
Page 6 – Customer Administerable Timer; The console beeps twice.; R E C Y C L E D P A P E R
Page 7 – Lucent Technologies

Loading the manual

Lucent Technologies

Bell Labs Innovations

CIB 3140

(533B) Memory Module (61227A)

(106433691)

CIB 3140

Comcode 106433691

Issue 2

January 1997

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - M e m o r y M o d u l e; Release 2 System Manual.

M e m o r y M o d u l e When installed in the MERLIN ® Plus system control unit, this memory module (Figure 1) upgrades your system to the MERLIN Plus Communi- cations System Release 2. M E M O R Y MODULE Figure 1 MERLIN Plus Communications System Release 2 Memory Module The new system features avai...

Page 3 - Make sure the power cord is unplugged and the; power switch on the control unit is set to Off before you insert or; remove any modules. You risk damage to the system and the; two top corner tabs and putting the top away from the control unit

NOTE: This memory module also houses a battery that preserves allprogramming for at least four days in case of a power failure.In addition, a 450F adapter is included to provide a connection betweenthe control unit and the Data Collector, and to allow the Data Collectorand the Busy Buster feature to...

Page 4 - Loosened screw; To Insert the new memory module, first grasp its plastic handle on

Loosened screw Removing the Front and Top Covers From the control Unit 4 5 6 7 Figure 2 To Insert the new memory module, first grasp its plastic handle on the front and align the four pin guides at each corner of the modulewith the rectangular opening at the top of the control unit (Figure 3). Push ...