LST SM-55000-852 - Manual
LST SM-55000-852 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
SMU-55000-852_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The addressable Control Module SMÜ-55000-852 ser-
ves for the line-monitored actuation of external devices,
such as fi re controls and acoustical or optical signal-
ling devices, via the bidirectional communication on the
ADM loop with Apollo/Discovery protocol. The external
devices are actuated by means of a monitored output.
An external supply voltage is required for powering the
external devices.
The address is easily selected by means of a built-in DIL
switch. The module has an integrated dual-isolator and
is fi tted into a plastic case. Status LEDs indicate the
condition of the output and the dual-isolator.
• ADM loop technology with
Apollo/Discovery protocol
• One line-monitored output
• Output line monitored for wire
breakage and short circuit
• Setting of module address by means
of address switch
• Integrated dual-isolator
Specifi cations
Operating voltage
Supply through loop voltage
Current consumption from loop
1.9mA (quiescent)
External supply voltage
max. 32VDC
Output current
max. 1A (resistive or inductive load)
Monitoring voltage
-10VDC
End-of-line resistor
10k
Ω
Ambient temperature
-20°C to +70°C
Dimensions L × W × H
150 × 90 × 48 (mm)
Colour
white
Weight
240g
Approval
VdS G201095
Order number
249073
Order name
Control Module/Anal./XP95/Apo SMÜ-55000-852
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
