LST SLR-E-IS - Manual
LST SLR-E-IS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
SLR-E-IS_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
• Conventional technology
• Optional connection of remote
indicator
• Extremely fl at design
• Function testable with test gas
• ATEX certifi ed
Specifi cations
Ignition protection
intrinsically safe
Ex classifi cation
EEx ia IIC T5
Current consumption at 24V
typ. 50µA (quiescent)
Ambient temperature
-10°C to +55°C
Relative humidity
10 – 95% (no condensation)
Dimensions ø × H (incl. base)
100 × 46 (mm)
Colour
cream
Weight
115g
Approval
BAS01ATEX1281
LPCB 164a
Order number
241090
Order name
IS Optical Smoke Detector/Conv. SLR-E-IS
The Intrinsically Safe Optical Smoke Detector SLR-E-IS
uses the scattered light principle and was developed
for the detection of smoke particles in explosion-prone
rooms.
The modern design of the sensing chamber al-
lows to reliably evaluate the characteristics of fi re.
Conventional technology is used for alarm transmission
to the fi re detection control panel. In conjunction with the
Safety Barrier ES58-2, the detector reaches the given
Ex classifi cation. The two LEDs with 360° visibility indi-
cate the activated condition of the detector. By means
of an auxiliary module, the connection to an ADM loop
is possible.
A detector function test can be conducted by using test
gas. The detector is attached to the IS Detector Base
YBN-R/4IS.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
