LST SIM216-1 - Manual
LST SIM216-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
SIM216-1_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
Specifi cations
The Serial Interface Module SIM216-1 provides fi re de-
tection control panels Series BC216 or Series BC016,
respectively, with a galvanically separated RS232C in-
terface. Devices with a serial interface (e.g., protocol
printer, PC with parameter setup software or electronic
monitoring system) can be connected to the fi re detec-
tion control panel with the aid of the componentry. The
transfer rate can be adjusted, if required.
The SIM216-1 occupies one of the two slots for serial
interfaces in fi re detection control panels Series BC216.
In BCnet sectional control panels, only one SIM216-1
module can be installed because one slot is always
used by the Network Interface Module for communica-
tion with the other BCnet sectional control panels. In
BC016 fi re detection control panels, only one slot is
designated for the installation of the Serial Interface
Module SIM216-1.
• Suitable for fi re detection control
panels Series BC216 and BC016
• Parameters for function and baud
rate can be freely set
• Selective event output by means of
fi lters
• Monitoring of the data line
• Galvanic separation
Current consumption at 24V
typ. 10mA
Interface
RS232C, galvanically isolated, up to 57.6kBaud
Signal lines
RxD, TxD, CTS/DTR
Connection type
D-SUB plug, 9-pin
Ambient temperature
-5°C to +50°C
Dimensions L × W × H
70 × 45 × 20 (mm)
Weight
50g
Part No.
214025
Order name
Serial Interface Module SIM216-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
