LST ISM1-3 - Manual
LST ISM1-3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
ISM1-3_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
Specifi cations
Operating voltage
Supply through loop voltage
Current consumption
max. 0.2mA
Ambient temperature
-5°C to +50°C
Dimensions L × W × H
70 × 24 × 15 (mm)
Weight
20g
Approval
VdS G296012
Order number
249029
Order name
Isolator Module/Anal./Apo ISM1-3
The Isolator Module ISM1-3 is used on the ADM loop with
Apollo/Discovery protocol and disconnects the loop in
the event of a short circuit of the loop connection.
Thereby only the loop elements located between two
isolator modules are affected by the short circuit.
The Fire Detection Control Panels Series BC216 report
the affected loop elements as faulty and operate the
remaining loop sections, which are not faulty, from both
ends of the loop, until the fault is removed.
• Safe disconnection of a faulty loop
section
• For use in an Apollo/Discovery loop
• Installation in commercial installation
boxes or in the LST standard grid
• Small design
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
