LST CR-6 - Manual
LST CR-6 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
CR-6_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The addressable Control Module CR-6 serves for the ac-
tuation of external devices by means of 6 independent
dry relay contacts, via the bidirectional communication
on the ADM loop with System Sensor/200 protocol.
The Control Module CR-6 occupies 6 consecutive
addresses on the ADM loop. During commissioning, the
base address, i.e., the lowest one of the 6 addresses,
is set by means of decadic rotary switches.
The optional steel sheet Surface Mounting Box
M200SMB-MM accommodates one Monitor Module
IM-10 or Control Module CR-6.
• ADM loop technology with
System Sensor/200 protocol
• 6 independent, dry relay outputs
• Status LED for each output
• Setting of module address via
decadic rotary switches
• Mounting in surface mounting box
Specifi cations
Operating voltage
Supply through loop voltage
Current consumption
approx. 1.5mA (quiescent)
Contact rating
2A/30VDC
Ambient temperature
0°C to +50°C
Dimensions L × W × H
172 × 147 × 25 (mm)
Weight
500g
Order number
249116
Order name
Control Module 6xRel.Out/Anal./200/SS CR-6
Surface Mounting Box
Ambient temperature
0°C to +50°C
Dimensions L × W × H
285 × 225 × 62 (mm)
Colour
cream
Weight
2kg
Order number
249117
Order name
Surface Mounting Box for Multimodule/SS M200SMB-MM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
