LST AMS-58000-700 - Manual
LST AMS-58000-700 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
AMS-58000-700_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The addressable Optical-Thermal Detector AMS-
58000-700 uses the scattered light principle as well as
a separate thermal detection unit. It was developed to
detect the characteristics of fi re in a wide range of ap-
plications, and to avoid deceptive alarms. The modern
design of both measurement systems and the analysis
of the parameters by means of a defi ned algorithm al-
low to reliably evaluate the characteristics of fi re.
The response sensitivity and the operating mode of the
detector can be selected in 5 steps (optical-only ope-
ration, thermal-only operation as well as three multisen-
sor levels), via the fi re detection control panel.
The proven ADM loop technology with Apollo/Discove-
ry protocol establishes a permanent communication
between the fi re detection control panel and the de-
tector. That ensures a periodical function testing of the
detector.
The infl uence of contamination of the optical measure-
ment system is compensated for by using intelligent
evaluation algorithms. With that, the response sensiti-
vity of the detector is kept constant for a long time –
a further effective step to avoid false alarms.
The two LEDs with 360° visibility indicate the activa-
ted condition of the detector. The detector address
is selected by means of a code card in the detector
base. Therefore the detector can be changed without
additional tools.
The detector can be attached to various bases and it
can be protected against theft.
• ADM loop technology with
Apollo/Discovery protocol
• Combination of optical and thermal
characteristics of fi re
• Alarm temperature 58°C
• Several sensitivity levels as well
as thermal-only and optical-only
operation selectable
• Constant response sensitivity
• Sealed electronics
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
