Page 2 - TABLE OF CONTENTS
TABLE OF CONTENTS This manual may contain images or content different from the model you purchased.This manual is subject to revision by the manufacturer. SAFETY INSTRUCTIONS ................................................... 3 IMPORTANT SAFETY INSTRUCTIONS ............................................
Page 3 - SAFETY INSTRUCTIONS; The following safety guidelines are intended to prevent; Children in the Household; with reduced physical, sensory or mental capabilities, or lack of
3 SAFETY INSTRUCTIONS EN The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. This symbol is displayed to indicate matters and operations t...
Page 4 - Installation
4 EN Installation • Do not install the air conditioner on an unstable surface or in a place where there is danger of it falling. • Contact an authorized service center when installing or relocating the air conditioner. • Install the panel and the cover of the control box safely. • Do not install the...
Page 5 - Operation
5 EN • Install dedicated electric outlet and circuit breaker before using the air conditioner. • Do not connect the ground wire to a gas pipe, a lightning rod, or a telephone ground wire. Operation • Be sure to use only those parts listed in the service parts list. Never attempt to modify the equipm...
Page 6 - Maintenance
6 EN • Do not block the inlet or outlet of air flow. • Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. • Make sure that the power cable is neither dirty, loose, nor broken. • Never touch, operate, or repair the air conditioner with wet han...
Page 7 - Technical Safety
7 EN Technical Safety • Installation or repairs made by unauthorized persons can pose hazards to you and others. • The information contained in the manual is intended for use by a qualified service technician who is familiar with the safety procedures and equipped with the proper tools and test inst...
Page 10 - Never touch the metal parts of the air conditioner when removing
10 EN Maintenance • Never touch the metal parts of the air conditioner when removing the air filter. • Use a sturdy stool or ladder when cleaning, maintaining, or repairing the air conditioner at a height. • Never use strong cleaning agents or solvents when cleaning the air conditioner or spray wate...
Page 11 - OPERATION; Notes for Operation; Suggestion for Energy Saving; Parts and Functions; Indoor Unit; NOTE
11 OPERATION EN Notes for Operation Suggestion for Energy Saving • Do not cool excessively indoors. This may be harmful for your health and may consume more electricity. • Block sunlight with blinds or curtains while you are operating the air conditioner. • Keep doors or windows closed tightly while...
Page 12 - Wireless Remote Control; Inserting Batteries
12 EN Wireless Remote Control Inserting Batteries If the display screen of the remote control begins to fade, replace the batteries. Insert AAA (1.5 V) batteries before using the remote control. 1 Remove the battery cover. 2 Insert the new batteries and make sure that the + and - terminals of the ba...
Page 13 - Setting the Current Time; Using the °C/°F Conversion; Operating the Air Conditioner
13 EN Setting the Current Time 1 Insert batteries. • The icon below blinks at the bottom of the display screen. 2 Press or button to select the minutes. 3 Press SET/CANCEL button to finish. NOTE • The On/Off Timer is available after setting the current time. Using the °C/°F Conversion Function (Opti...
Page 14 - Using Wireless Remote Control
14 EN Using Wireless Remote Control You can operate the air conditioner more conveniently with the remote control. SWING kW [3 s] ℃↔℉ [5 s] DIAGNOSIS [5 s] SWING SET UP ROOM TEMP JET MODE MODE TEMP FAN SPEED FUNC. TIMER CANCEL SET CANCEL * * 1 2 * RESET Button Display Screen Description - To turn on...
Page 17 - Disabling Auto Restart; Using the Mode Function; Cooling Only Model
17 EN Restarting the Air Conditioner Automatically When the air conditioner is turned on again after a power failure, this function restores the previous settings. Disabling Auto Restart 1 Open the front cover (Type2) or horizontal vane (Type1). 2 Press the ON/OFF button and hold it for 6 seconds, t...
Page 18 - Fan Mode; Cooling & Heating Model
18 EN Heating Mode 1 Turn the appliance on. 2 Press MODE button repeatedly to select the Heating Mode. • is displayed on the display screen. 3 Press or button to set the desired temperature. Dehumidification Mode This mode removes excess moisture from a highly humid environment or during the rainy s...
Page 19 - Auto Operation (Artificial; Using the Jet Mode Function; Changing Room Temperature
19 EN Auto Operation (Artificial Intelligence) Cooling Only Model This mode automatically sets the fan speed and temperature depending on the room temperature. 1 Turn the appliance on. 2 Press MODE button repeatedly to select the Auto Operation. • is displayed on the display screen. 3 Press or butto...
Page 20 - Using the Fan Speed Function; Adjusting the Fan Speed; Using the Air Flow Direction
20 EN Using the Fan Speed Function Adjusting the Fan Speed • Press FAN SPEED button repeatedly to adjust the fan speed. Display Screen Speed High Medium - High Medium Medium - Low Low - Natural Wind NOTE • The fan speed of Natural Wind adjusts automatically. → → • The fan speed icons are displayed o...
Page 21 - Setting the On/Off Timer; Setting the On Timer; Canceling the On Timer; Setting the Off Timer; Canceling the Off Timer; Canceling the Timer Setting
21 EN Setting the On/Off Timer This function sets the air conditioner to turn on/ off automatically at desired time. Setting the On Timer 1 Press TIMER button repeatedly. • The icon below blinks at the bottom of the display screen. 2 Press or button to select the minutes. 3 Press SET/CANCEL button t...
Page 22 - Using the Sleep Function; Using the Simple Timer
22 EN Using the Sleep Function (Optional) This function turns off the air conditioner automatically when you go to sleep. 1 Turn the appliance on. 2 Press TIMER button repeatedly. • The icon below blinks at the bottom of the display screen. 3 Press or button to select the hour (up to 7 hours). 4 Pre...
Page 23 - Using the Energy Display; Display the Current Energy Usage; Using the Light Off Function; Display Screen Brightness; Using the Comfort Air; Comfort Vane Operation
23 EN Using the Energy Display Function (Optional) This function displays the amount of electricity generated on the indoor display as the product operates. Display the Current Energy Usage 1 Turn the appliance on. 2 Press kW [3 s] button and hold it about 3 seconds. • The instantaneous power consum...
Page 25 - Using Special Functions
25 EN Using Special Functions 1 Turn the appliance on. 2 Press FUNC button repeatedly to select the desired function. 3 Press SET/CANCEL button to finish. Display Screen Description To purify the air by removing particles that enters the indoor unit.To reduce noise from outdoor units.To keep your sk...
Page 26 - Using the Silent Function; Using the Ion Care Function; Using the Jet Dry Function
26 EN Canceling Special Functions 1 Press FUNC button repeatedly to select the desired function. 2 Press SET/CANCEL button to cancel the function. Using the Air Purification Function These functions supply clean and fresh air by ion particles and the filter. Function Display Description Ionizer Ion ...
Page 27 - Using the Low Heating Function; Using the Mosquito Away; Using the Auto Clean Function; Using the Comfort Sleep Function
27 EN Using the Low Heating Function This function operates the heating system to maintain a minimum room temperature and prevent objects in the room from freezing where there is no permanent resident, such as a vacation. • , are displayed on the display screen. NOTE • This function is available wit...
Page 28 - SMART FUNCTIONS; Using Smart ThinQ; Installing Smart ThinQ; Using the Application
28 SMART FUNCTIONS EN Using Smart ThinQ Application Installing Smart ThinQ Search for the LG Smart ThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application. Product Registration 1 Run the LG Smart ThinQ application ...
Page 29 - RF Radiation Exposure Statement; Smart DiagnosisTM Using a Smart
29 EN RF Radiation Exposure Statement • This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this pr...
Page 30 - MAINTENANCE; WARNING
30 MAINTENANCE EN WARNING • Before cleaning or performing maintenance, disconnect the power supply and wait until the fan stops. If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. Clean the product regularly to maintain o...
Page 32 - Clean the Air Filter
32 EN Clean the Air Filter Clean the air filters once every 2 weeks, or more, if necessary. NOTE • The air filter can be broken when it is bended. • When the air filter is not assembled correctly, dust and other substances come into the indoor unit. Type1 If you look at the indoor unit from above it...
Page 33 - Clean the 3M and Triple Filter
33 EN Clean the 3M and Triple Filter (Optional) 1 Turn off the power and unplug the power cord. 2 Remove the air filters from the indoor unit. 3 Remove the 3M and Triple filters from the indoor unit. Type1 Type2 4 Clean the filters with a vacuum cleaner. 5 Insert the 3M and Triple filters. Type1 Typ...
Page 34 - TROUBLESHOOTING; Self-diagnosis Function
34 TROUBLESHOOTING EN Self-diagnosis Function This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit will blink in 2 second intervals. If this occurs, contact your local dealer or service center. Before Calling for Service Please check the following befo...
Page 37 - Memo
