Page 2 - Legal and General Information; Notice
Legal and General Information Notice Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. Kyocera Mita cannot be held liable for any problems arising from the use of this product, regardless of the information herein...
Page 3 - Table of Contents
1. Features ................................................................................................................. 1 1.1. What is KM-NET for Clients? .......................................................................... 11.2. System Requirements..........................................
Page 6 - Features; supports the following languages: Arabic, Brazilian Portuguese,
Features 2 KM-NET for Clients 1.3. Support Language KM-NET for Clients supports the following languages: Arabic, Brazilian Portuguese, Czech, Danish, Dutch, English, Farsi, Finish, French, German, Hebrew, Hungarian, Italian, Lithuanian, Japanese, Korean, Norwegian, Polish, Russian, Simplified Chines...
Page 7 - Installation and Startup; Install
Operation Guide 3 Installation and Startup 2. Installation and Startup 2.1. Installation Install KM-NET for Clients on your computer. Note Before installing this application, check that the KX driver is installed on the computer. KX Driver is on the CD-ROM supplied with the printing system. Insert t...
Page 8 - Main Screen; The main screen is explained below.; Clients
Main Screen 4 KM-NET for Clients 3. Main Screen 3.1. Views and Buttons The main screen is explained below. The following table explains the views and buttons on the main screen of KM-NET for Clients . The numbers appearing in the figure above are referred to in the Reference Number column on the fol...
Page 9 - Connection View
Operation Guide 5 Main Screen Ref. No. Name and Icon Description 1 Connection View The Connection View displays connected printing system icons for that have been discovered through the printer discovery process. A maximum of five printing system icons can be displayed in this view. Each icon descri...
Page 10 - Information View; Name and Icon
Main Screen 6 KM-NET for Clients 2 Information View The Information View describes the status of the printing system in greater detail. Green indicates normal status and red indicates that a problem has occurred. Click the triangular icon circled in red in the left diagram to switch screens. Dependi...
Page 12 - About KM-NET for Clients
Main Screen 8 KM-NET for Clients 3.2. Settings When operating KM-NET for Clients , you can change settings for polling interval, audible (error) notification, whether you want to use the 3D virtual printing system to monitor the printing system status, etc. 1 Click SETUP on the main screen. The KM-N...
Page 14 - Add Printing System Wizard; Adding the Printing Systems Using Standard Mode
Add Printing System Wizard 10 KM-NET for Clients 4. Add Printing System Wizard To search for printing systems to be registered, click Add . The Add Printing System Wizard starts. 4.1. Adding the Printing Systems Using Standard Mode To add the printing systems using standard mode, perform the followi...
Page 15 - Adding the Printing Systems Using Advanced Mode; Local Printer
Operation Guide 11 Add Printing System Wizard 5 After searching completes, the searched printing systems are displayed. Up to five desired printing systems can be selected. To select multiple printing systems, press and hold Ctrl key and click on the desired printing system name. 6 Click Finish to r...
Page 16 - Network Address
Add Printing System Wizard 12 KM-NET for Clients 3 Select Local printer . 4 Click Next . 5 Perform the instructions displayed by the wizard. Network Address To add printing system using network address option, perform the following procedure. 1 Select Advanced . 2 Click Next . 3 Select Network addre...
Page 17 - Import Printing Systems
Operation Guide 13 Add Printing System Wizard Import Printing Systems To add printing system using import printing systems option, perform the following procedure. 1 Select Advanced . 2 Click Next . 3 Select Import printing systems . 4 Click Next . 5 Select one data file to import network address. T...
Page 18 - Add Printing System Wizard; Adding the Printing Systems Using History Mode; Select; History; Click; Next; key and click on the desired printing system name.; Finish
Add Printing System Wizard 14 KM-NET for Clients 4.3. Adding the Printing Systems Using History Mode History mode displays the printing systems that were previously searched using standard mode or IP range discover in advanced mode. To add the printing system using history mode, perform the followin...
Page 19 - Operation Guide
Operation Guide 15 Properties 5. Properties 5.1. Accessing the Properties Dialog Box When you click the Properties button on the main screen, the printing system properties dialog box as shown below appears. For details of the property items, refer to Help . Notes • The contents of the printing syst...
Page 20 - Properties; Displays the current condition of the printing system.; Trouble tips; appears instead of; General; information like below.
Properties 16 KM-NET for Clients 5.2. Status Tab Displays the current condition of the printing system. If an error occurs, Trouble tips appears instead of General information like below.
Page 24 - Feed
Properties 20 KM-NET for Clients 5.7. Copy Tab Allows you to check and configure the settings for the copy function. Main Item Sub Item Description Feed APS media type When Enable is checked and a paper type is selected from the Paper Type dropdown list, the feeding destination is automatically sele...
Page 29 - Restriction
Operation Guide 25 Properties 5.10. FAX Advanced Tab Allows you to configure the advanced settings for FAX function such as transmit/receive restrictions, or report print out settings. Main Item Sub Item Description Restriction Transmit restriction Select the list used for transmit restriction. Off ...
Page 34 - Address Book
Properties 30 KM-NET for Clients Timer Auto panel reset Specifies the time for auto panel reset. When this function is enabled, if no operation has been performed on the operator panel during a specified time, the display automatically returns to the default. Form feed timeout Adjusts the form feed ...
Page 39 - Name Tab
Operation Guide 35 Address Book 6.3. Edit Address Dialog Box In the Edit Address dialog box, you can configure or edit addresses in detail. Name Tab Item Description Name Enter the name.The maximum length of the Name is 32 characters. Address The address is displayed in the following format. E-Mail ...
Page 40 - Cover page Tab; Item; Recipient
Address Book 36 KM-NET for Clients Cover page Tab You can load the information registered here when creating a cover letter with the Network FAX driver before Network FAX transmission. Item Description Recipient Enter the name of the recipient.The maximum length of the destination name is 32 charact...
Page 41 - FTP Tab; Host Name
Operation Guide 37 Address Book E-Mail Tab FTP Tab Item Description E-Mail Address Enter the e-mail address.The maximum length of the e-mail address is 126 characters. Item Description Host Name Enter the host name of the FTP server. When the port number is different from the value set on the system...
Page 42 - SMB Tab
Address Book 38 KM-NET for Clients SMB Tab Login user name Enter the login user name.The maximum length of the login user name is 62 characters. Login password Enter the login password.The maximum length of the login password is 62 characters. Item Description Host Name Enter the host name. When the...
Page 43 - FAX Tab
Operation Guide 39 Address Book FAX Tab Item Description FAX No. Enter the FAX number.The maximum length is 32 characters. TX Start Speed Select the transmission speed from "33600bps," "14400bps" and "9600bps." ECM Select ON or OFF for ECM. Sub Address Enter the subaddress.Th...
Page 44 - Internet FAX Tab
Address Book 40 KM-NET for Clients Internet FAX Tab Item Description Internet FAX address Enter the Internet FAX address. The maximum length is 126 characters. Mode Select the mode from Simple and Full. File format Select the file format from TIFF-MH, TIFF-MR, TIFF-MMR, and TIFF-JBIG. Resolution Sel...
Page 47 - Deleting a member; From the address list, select the member to be deleted.; Delete; OK
Operation Guide 43 Address Book Deleting a member 1 From the address list, select the member to be deleted. 2 Click Delete . 3 Click OK .
Page 48 - Job Viewer
Job Manager 44 KM-NET for Clients 7. Job Manager 7.1. What is Job Manager? The printing job can be stored in the storage devices of the printing system. This job is administered, reprinted and deleted using Job Manager function. Turning the printing system power off will not delete stored jobs. Note...
Page 49 - Click the Delete icon to delete the selected job.
Operation Guide 45 Job Manager 2 Select the job to be operated. In this screen, users can obtain job information and manage jobs. Click the Refresh icon to update information about the selected job. Click the Delete icon to delete the selected job. Click the Print icon to start the print job wizard....
Page 50 - Job Manager
Job Viewer 46 KM-NET for Clients 8. Job Viewer 8.1. What is Job Viewer? Printing jobs can be stored on the hard disk drive (HDD) in the printing system. The job log can be downloaded or deleted using the Job Viewer . Stored jobs will not be deleted even if the printing system is turned off. Note Job...
Page 57 - Creating or Deleting a Document Box; Creating a Document Box
Operation Guide 53 Document Box 10.2. Creating or Deleting a Document Box The following three types of document boxes exist.. Creating a Document Box 1 Click New in the Document Box window. 2 The Add a new document box dialog box appears. 3 Enter the information about the document box. 4 Click OK . ...
Page 58 - General Tab
Document Box 54 KM-NET for Clients 10.3. Editing a Document Box You can edit the details in a document box. When you select the document box and then select Properties from the right-click menu, the Properties dialog box appears. You can display the Properties dialog box from the menu or toolbar ico...
Page 59 - Security Tab; Delete transmitted file
Operation Guide 55 Document Box For the Polling Box Security Tab Item Description Delete transmitted file Documents are deleted after they are polled from other FAX machines. Item Description Permission Select "Shared" for printer sharing, or "Private" for personal use.This item can ...
Page 60 - Troubleshooting; If trouble occurs with using; Symptom
Troubleshooting 56 KM-NET for Clients 11.Troubleshooting If trouble occurs with using KM-NET for Clients , carry out the applicable remedy indicated below. If the trouble persists, contact your service representative or authorized service center. Symptom Cause Remedy The utility does not start. Your...
