Kyocera KM-3650w - Manual

Chapter 1 Before Use 1-4 1. 3 Specifications 1. 3. 1 General Subject Specification Model KM-3650w Configuration Console Maximum power consumption 1500W (Including Scanner, Controller Unit and every option) Acoustic noise Idling Max. 54db Printing Max. 60db Impulse sound Max. 65db EN ISO7779 Ozone Ma...

Chapter 1 Before Use 1-9 1. 5 Specifications for the Scan Original A scan original must satisfy the following specifications. Thickness 0.05mm to 0.6mm Width 279.4mm to 914.4mm (11” to 36”) Length 210mm to 3,600mm Do not scan the following kinds of original, because you may damage the original or sc...

Chapter 1 Before Use 1-12 1. 6 Specifications for the Printing Paper 1. 6. 1 Papers not available to use Do not use the following kinds of printing paper because you may damage the print engine! So much curled paper Folded paper Creased paper Torn paper Punched paper

Chapter 1 Before Use 1-13 Paper that has already been used for printing Very slippery paper Very sticky paper Very thin and soft paper OHP Film 1. 6. 2 Keeping the paper in the custody Keep the paper in the custody taking care of the following matters. 1. Do not expose the paper to the direct sunlig...

Chapter 1 Before Use 1-14 1. 6. 3 Measures against environmental condition Take measures to meet with the environmental condition as shown below. Humidity (%) Possible problem Measures “Void of image”, “crease of paper” and other problems occurs when you print with plain paper and tracing paper. 1. ...

Chapter 2 Basic Operations 2-1 Chapter 2 Basic Operations Page 2. 1 Turning on the Machine 2- 2 2. 2 Turning off the Machine 2- 3 2. 3 Replacement of Roll Paper 2- 4 2. 4 Replacement of Toner Cartridge 2- 9 2. 5 Set of Cut Sheet Paper to the Bypass Feeder 2- 13 2. 6 Copying 2- 14 2. 7 Emergent Stop ...

Chapter 2 Basic Operations 2-2 2. 1 Turning on the Machine 1. Plug the machine into an exclusive wall outlet. 2. Press the Power Switch on the right side of the KM-3650w to turn on the machine. Power Switch Press this side. 3. The Ready Indicator lights when the KM-3650w gets ready. Make scan, copy ...

Chapter 2 Basic Operations 2-3 2. 2 Turning off the Machine 1. Press the Power Switch on the right side of the KM-3650w to turn off the machine. Power Switch Press this side. CAUTION Do not unplug the KM-3650w for 1 minute after turning it off. The Controller Unit requires 1 minute to completely shu...

Chapter 2 Basic Operations 2-4 2. 3 Replacement of Roll Paper Roll 2 is an optional part. The machine is equipped with the Roll 2 in the following instruction. 1. Pull up the Lever (1) and draw out the Roll Deck (2). 2. Remove the Roll Spool (3) with paper core from the Roll Deck. 1 3 NOTE Confirm t...

Chapter 2 Basic Operations 2-9 2. 4 Replacement of Toner Cartridge 1. Open the Toner Hatch (Original Table) (1). 2. Slide the green Lever (2) to the right to unlock the Toner Cartridge. (Lever (2) is held automatically.) 1 2

Chapter 2 Basic Operations 2-15 2. 7 Emergent Stop of Scan or Copy Press the Emergent Stop Button (1) on the Scanner Unit if you will stop scanning or copying emergently in the middle. 1 NOTE The original is stopped at the time you press the Emergent Stop Button. The printing paper is cut at the sam...

Chapter 3 Error Correction 3-1 Chapter 3 Error Correction Page 3. 1 Operator Call Errors 3- 2 3. 1. 1 Paper jam 3- 2 3. 1. 1. 1 Paper jam in the Roll Deck. Set the roll paper correctly. 3- 2 3. 1. 1. 2 Paper jam in the bypass feeder. Remove the paper. 3- 5 3. 1. 1. 3 Paper jam in internal area. Open...

Chapter 3 Error Correction 3-17 3. 1. 3. 3 Toner empty. Replace the toner cartridge. When “Toner empty.” is displayed, replace the Toner Cartridge with the new one. Refer to [2.4 Replacement of Toner Cartridge] on page 2-9 for the way to replace the Toner Cartridge. 3. 1. 3. 4 In Warm Sleep Mode Whe...

Chapter 4 Maintenance 4-1 Chapter 4 Maintenance Page 4. 1 Cleaning of Each Part 4- 2 4. 1. 1 Scanner Unit 4- 2 4. 1. 2 Print Engine 4- 4 4. 1. 3 Operation Panel 4- 6