Kyocera 82-K5243 - Manual

• fueling areas such as gas stations • below deck on boats • transfer or storage facilities for fuel or chemicals • vehicles using liquefied petroleum gas, such as propane or butane • areas where the air contains chemicals or particles such as grain, dust, or metal powders • any other area where you...

Contents 1 Getting Started .......................................................................... 1 Screen icons .....................................................................................3Menus ..............................................................................................

User’s Guide for the QCP 3035 phone Call Information .............................................................................. 49Network ......................................................................................... 50Extras ..............................................................

User’s Guide for the QCP 3035 Phone 1 1 GETTING STARTED Jack for Hands-free headset (sold separately) only. Home screen. Press to select Menu. Send/Talk key starts or answers a call and starts VM. Speakerphone key activates the speakerphone. Use the keypad to enter numbers, letters, or symbols. Shif...

2 Getting Started Navigation key adjusts volume; scrolls up, down, left or right through lists and menus; and selects a menu item or option when pressed in. End/Power key turns on and turns off the phone, ends a call, or returns to the home screen. Clear key erases the last character in text entry, ...

User’s Guide for the QCP 3035 Phone 3 Screen icons The following icons may appear on your phone screen: The phone is operating in CDMA digital mode. The phone is receiving a signal. You can make and receive calls. The phone is not receiving a signal. You cannot make or receive calls. A call is in pr...

4 Getting Started You have a new text message, voice mail, or page. The battery is fully charged. The more black bars you see, the greater the charge. Press up. Press down. Press to clear an item. Enter text using rapid text entry (available in English only). Enter text using normal alpha text entry...

User’s Guide for the QCP 3035 Phone 5 Menus To view any of these menus from the home screen, press in to select Menu, then press left or right to select a menu option. Contacts View AllAdd NewFind NameSpeed Dial ListVoice Dial ListBusiness ListPersonal ListInformation Messages VoiceSend New*Send Pre...

6 Getting Started Using menus • From the home screen, press in to see menus. • Press in to select a menu or menu item. • Once you have selected a menu, press up or down to scroll through the menu items. • Press to return to the previous screen. • Press to return to the home screen. In this guide, → ...

User’s Guide for the QCP 3035 Phone 7 Basic functions This document describes how to use the basic functions of the QCP 3035 trimode phone, with CDMA digital service at 800 and 1900 MHz, and analog service at 800 MHz. To turn on the phone • Press and hold about two seconds. ¤ and the home screen app...

8 Getting Started To make a call 1. Fully extend the antenna. 2. Enter the phone number. 3. Press . To end a call • Press . To answer a call • Press . To silence the ringer or alert • To silence the ringer or stop the vibration alert during an incoming call, press . Press to answer the call. Note— T...

User’s Guide for the QCP 3035 Phone 9 To mute and unmute during a call • To turn Mute on, press in to select Mute from the bottom of the home screen. • To turn Mute off, press in to select UnMute from the bottom of the home screen. To adjust the volume • To manually adjust the earpiece volume during...

10 Getting Started 4. Select one of the following: – Enabled adjusts the volume automatically. The volume you have just set is used as a baseline. You can manually adjust the volume during a call. – Disabled keeps the volume level the same unless you adjust it using the key. 5. Press in to save the ...

User’s Guide for the QCP 3035 Phone 11 To turn on the speakerphone You may turn on the speakerphone at any time. • During an incoming call alert, press to answer the call and turn on the speakerphone simultaneously. • Once the speakerphone is turned on, “ Speaker is ON” will be displayed on the scre...

User’s Guide for the QCP 3035 Phone 13 2 BATTERY Your phone comes with an external lithium ion (LiIon) battery. The battery is partially charged when you receive the phone. Before using your phone, fully charge the battery. Connect the travel charger to the proper jack on the bottom of the phone as ...

14 Battery Power-save mode Your phone switches to power-save mode after several unsuccessful attempts to locate a signal. When the phone is in power save mode, you cannot make or receive calls. “Power Save Mode” and appear on the screen. Press any key to exit. Caring for your battery Follow these gu...

User’s Guide for the QCP 3035 Phone 15 Removing the battery 1. Power off the phone. 2. Hold the phone in your hand with the home screen facing away from you. 3. Place your finger on the upper ridge of the battery latch. 4. Push down with your finger and pull the battery door toward you until it disl...

User’s Guide for the QCP 3035 Phone 17 3 CONTACTS Use your phone’s Contacts directory like a set of phone index cards to store information about a person or company. Before using the Contacts directory, see “To enter letters, numbers and symbols” on page 33. The Contacts Directory stores a maximum o...

18 Contacts Working with contact cards To save a phone number 1. From the home screen, enter the phone number you want to save. 2. Press in to Save New. Note— To add to an existing contact, select Add to... after you enter the number. Select the contact you want to add to, then proceed to step 5. 3....

20 Contacts If you want to continue entering information, select another option. Note— You may also save a phone number through the Contacts directory as follows: 1. From the home screen, select Menu → Contacts → Add New → Phone Number. 2. Enter the phone number up to as many digits as will fit on t...

User’s Guide for the QCP 3035 Phone 21 When you save the phone number of an automated service, such as voicemail, you may include a pause where you would be required to select an option or enter a password. For example, you could enter a phone number, then a pause, then a voicemail extension or call...

22 Contacts To edit a contact card 1. From the home screen, select Menu → Contacts or press right. 2. To find the contact you want to edit, select either View All or Find Name. 3. Press in to select the contact card you want to edit. You may edit the entire contact card (see step 4) or select a phon...

24 Contacts – Edit Voice Dial assigns a new voice dial tag to this entry. – Secret sets up your security options for this entry. – Primary Number sets the entry as the primary number for this contact. The primary contact is the one displayed on the contact list by default. – Edit Type changes the ty...

User’s Guide for the QCP 3035 Phone 25 3. Press in to select the contact card you want to edit. 4. If you want to erase the entire contact, select Options → Erase Contact. A message appears: “Erase the entire contact?” Select No to cancel, or Yes to erase the entire contact. 5. If you want to erase ...

26 Contacts 1. From the home screen, select Menu → Contacts or press right. 2. Press down to select a search method: To look through a list of names, select View All, Speed Dial List, Voice Dial List, Business List, or Personal List. -or- To search for a specific name, select Find Name. Enter all or...

User’s Guide for the QCP 3035 Phone 27 Note— You may quickly access your Contacts list from the home screen by pressing right. 2. Scroll to a name on the list and press in. 3. Select the number and press . Speed Dial and 1-Touch Dial Speed Dial and 1-Touch Dial allow you to quickly dial a stored pho...

28 Contacts 5. Press in to Assign. Note— The speed dial location “1” is reserved for your voicemail. To remove a speed dial location 1. From the home screen, select Menu → Contacts → Speed Dial List. 2. Scroll up and down to select a speed dial location. Press in. 3. Select the number to remove and ...

User’s Guide for the QCP 3035 Phone 29 To speed dial • From the home screen, enter the one- or two-digit speed dial number and press . To call your voicemail number • From the home screen after receiving a notification, press in to select Voice. -or- • Press and hold your voicemail speed dial number...

30 Contacts To use 1-Touch Dial • Enter the one- or two-digit speed dial number and hold down the last number. For example, if the speed dial number is 15, press , then press and hold . To redial the last number called • Press twice. To change your voicemail speed dial number 1. Select Menu → Settin...

User’s Guide for the QCP 3035 Phone 31 Working with the Recent Calls list The Recent Calls list shows the last 30 calls made and received. Calls are identified by type. (Some types may not be available on all phones. Check with your service provider.) Note— You may quickly access the Recent Calls li...

32 Contacts To view the Recent Calls list 1. From the home screen, select Menu → Recent Calls, or press left from the home screen. 2. To view details about a call, select a call entry. 3. Scroll left or right to select an option ( Save New, Add to, Number, or View Contact ). 4. Press in. Note— If th...

User’s Guide for the QCP 3035 Phone 33 To enter letters, numbers, and symbols You can enter letters, numbers, and symbols in a contact card. The default text entry mode is  . • To enter spaces between words, press . • To move the cursor, press in the appropriate direction. • To erase characters, pr...

34 Contacts To change text entry modes 1. From a text entry screen, press in to highlight the options at the bottom of the screen. 2. Press right to find the active text entry mode. Press in. 3. Select the text entry mode you want from the list. Shortcut— Press and hold to switch between text entry ...

User’s Guide for the QCP 3035 Phone 35 To use rapid text entry T9 Text Input allows you to enter text quickly. For example, to enter the word “how,” press , , . The software will suggest words as you type. • Wait until you have typed the entire word before checking the screen to see if the word show...

36 Contacts To enter symbols 1. From the text entry screen, press in to highlight the options at the bottom of the screen. 2. Press right to the text entry mode you are currently using. 3. Press in to select the mode. 4. Press down through the list of modes. 5. Highlight and press in to select it. 6...

User’s Guide for the QCP 3035 Phone 37 To change language and enter accented characters Your phone supports English and one of the following languages: Spanish, French, or Portuguese. If you select English, enter the letters printed on the keys. If you select another language, you can also enter let...

38 Contacts To select a language 1. From the home screen, select Menu → Settings → Display → Language. 2. Select the language from the list and press in. 3. Press the appropriate keys to enter special characters.

User’s Guide for the QCP 3035 Phone 39 4 SETTINGS The Settings menu includes the following options. Silence All Sounds (Cont) No, normal Earpiece Volume Yes, vibe only Key Beep Length Yes, lights only Missed Call Alert Keyguard Smart Sound Guard Now Business Call Ring 30s auto-guard Personal Call Ri...

40 Settings Display (Cont) Extras Time/Date Format Fast Find Contrast Display 1-Touch Dialing Security Voice Training Lock Phone Use Browser Prompt Limit Calls Out Messaging Change Lock Code Voicemail Number Erase All Contacts Auto-Erase Text Erase Recent Calls Voicemail Alert Phone Reset Page Alert...

User’s Guide for the QCP 3035 Phone 41 Silence All You may silence all phone sounds, including the ringer and all alerts, while leaving the phone on. You can replace the sounds by setting the phone to vibrate or light up. 1. Select Menu → Settings → Silence All . 2. Select an option and press in: – ...

42 Settings Keyguard The Keyguard locks your keypad to protect your phone against accidental keypresses when the phone is turned on and a call is not in progress. You may still answer and silence incoming calls with Keyguard on. To turn keyguard on 1. Select Menu → Settings → Keyguard . – Highlight ...

User’s Guide for the QCP 3035 Phone 43 While the keyguard is activated, “Keyguard ON” appears where the menu usually appears. Shortcut —To turn the keyguard on quickly from the home screen, press and hold for several seconds. To turn keyguard off 1. Press , , . The home screen menu returns. Sounds Y...

44 Settings Headset Ringing When a headset is attached to the phone, you will hear incoming calls ring only through the earpiece on your headset. You can set your phone to alert you to incoming calls by vibrating before ringing through the earpiece. 1. Plug the headset into the phone. 2. Select Menu...

User’s Guide for the QCP 3035 Phone 45 2. To change the appearance of the menus you see when you select Menu from the home screen, select Main Menu View, then the option you want: – Small Icons – Large Icons – List Menus Hot Keys Hot Keys provide shortcuts to commonly used features. They allow you t...

46 Settings 3. When finished, select Done and press in. Note— If you no longer want a feature to serve as a Hot Key, you must uncheck the box. Contrast You may change the contrast of your phone’s screen. The default setting is Medium. 1. Select Menu → Settings → Display → Contrast Display. 2. Select...

User’s Guide for the QCP 3035 Phone 49 – Select No to leave the Recent Calls list unchanged – Select Yes to erase all recent calls. A message appears: “Erase ALL recent calls list entries?” Select No to cancel or Yes to erase all recent calls. To reset the phone 1. Select Menu → Settings → Security ...

50 Settings Recent Calls Timer This timer displays the total number and duration of recent calls you have made and received. Press in to select Reset. This resets the timer to zero. All Calls Timer This timer displays the total number and duration of all calls you have made and received. You cannot ...

User’s Guide for the QCP 3035 Phone 55 Extras These settings allow you to program various options. Fast Find Fast Find allows you to quickly find a number. As you enter numbers, your phone will display all matching entries. You may scroll up and down to view more numbers. To activate Fast Find, sele...

User’s Guide for the QCP 3035 Phone 57 – Both prompts you when you start the browser and exit the browser. – No Prompts means you do not receive any prompts. Messaging The messaging setting allows you to send, receive, and store messages. You may create your own or use preformatted messages. For det...

User’s Guide for the QCP 3035 Phone 59 – Vibe & remind alerts by vibrating every five minutes. – Low beep once alerts by beeping once (three quick beeps). – Low beeps alerts by beeping every five minutes. – Loud beep once alerts by beeping once loudly (three quick beeps). – Loud beeps alerts by ...

User’s Guide for the QCP 3035 Phone 61 5 TOOLS The Tools menu offers a variety of helpful items. Voice Memos For information on Voice Memos, see page 82. Scheduler The Scheduler allows you to schedule events, such as meetings or appointments. You can then view these events, and use the alarm to aler...

62 Tools 4. Press in when you are done entering letters. 5. Select Next to set the time and date of the event. –Press up or down to select the hour and minutes for the appropriate setting. –Press left or right to switch between Start, Duration, and Alarm. 6. Press in to select Next. 7. You can add a...

User’s Guide for the QCP 3035 Phone 63 Alarm Clock Use the Alarm Clock to set an alert for a specific time. The alert occurs only if the phone is on. 1. Select Menu → Tools → Alarm Clock → Set. – Press up or down to select an hour and minutes. – Press left or right to switch between hours, minutes, ...

64 Tools Tip Calculator 1. Select Menu → Tools → Tip Calculator. 2. Enter the amount of your bill and press in. 3. Select the amount you want to include as a tip (15%, 18%, 20%, 10%, 5%, Other) and press in. 4. Your total bill, including tip, is calculated and displayed. Note —You also have the opti...

66 Tools Countdown This timer counts down for a specified amount of time. It beeps, using the volume set for alerts, when that amount of time has elapsed. 1. Select Menu → Tools → Countdown. 2. Press in to Set . 3. Press up or down to set the hours, minutes, and seconds. To move the cursor, press le...

User’s Guide for the QCP 3035 Phone 67 3. Select Stop to quit counting. 4. Select Start to resume counting, or select Reset to set the counter back to zero. Text Memos Text Memos allows you to create and retrieve short text messages. 1. Select Menu → Tools → Text Memos. 2. Select Add New to create a...

68 Tools 1. Select Menu → Tools → Text Memos. 2. Highlight the appropriate message, and press in to select it. 3. Edit or erase the message as desired. Brick Attack Game 1. Select Menu → Tools → Brick Attack. 2. To start the game, press in. 3. To pause the game, press , then press in to Resume. The ...

User’s Guide for the QCP 3035 Phone 69 6 WEB BROWSER You can use your phone to browse the Internet if you have obtained phone Internet services from your service provider and if over-the-air Internet access is available in your area. Using the Web Browser • To learn how to enter text in the Web Brow...

User’s Guide for the QCP 3035 Phone 71 – Restart restarts the browser. Indicators and alerts Browser screen indicators • The icon appears at the top of the screen in a secure browser session. • Links are identified with an underline and an arrow. To select a link, press . Your weekend weatherwill be...

72 Web Browser Net alerts If your service provider activated Internet services on your phone and you are in an area that provides over-the-air Internet access, you may receive Net Alerts. These short messages allow you to quickly access information on the Internet.

User’s Guide for the QCP 3035 Phone 73 7 VOICE FEATURES The voice features of your QCP 3035 phone allow you to originate calls and record voice memos. Saving New Voice Tags Voice Recognition (VR) allows you to initiate a call to one of your entries in the Contacts directory by speaking the name of t...

74 Voice Features 3. Enter a name for the contact. (If you need to know how to use the keypad to enter letters, see page 33). Press in when you are done entering letters. 4. Scroll right and select Options → Add Voice Dial. 5. Follow the voice prompts. The VR says “Speak a name.” Recite the name, th...

User’s Guide for the QCP 3035 Phone 75 2. Find the contact you want to add a voice tag to by selecting either View All or Find Name. 3. Press in to select the contact card you want to edit. 4. Select the number you want to add a voice tag to and press in. 5. Select Add Voice Dial, then proceed to st...

76 Voice Features 2. To find the contact whose voice tag you want to edit, select either View All or Find Name. 3. Press in to select the contact card. 4. Select the number you want to edit a voice tag for and press in. 5. Select Edit Voice Dial, then proceed to step 5 in “Saving New Voice Tags” on ...

78 Voice Features The “Wake Up” command allows you to activate VR by voice. You must train the “Wake Up” command, but this feature may only be used with external power or an accessory, such as a hands-free car kit or portable hands-free car kit. Also, Voice Wake Up must be activated. To activate the...

User’s Guide for the QCP 3035 Phone 81 To answer a call • Say “Yes” or press any key except , , or . To ignore a call You may ignore an incoming call in two ways: • Say “No” or press , , or . The voice alert is silenced. • Remain silent. The voice alert repeats twice and the phone rings once, then r...

82 Voice Features Voice Memo The Voice Memo tool allows you to record and name multiple memos. The following options are available to create and edit your memos: To record a memo 1. Select Menu → Tools → Voice Memos. 2. Press in to select Record New. The phone says “Please record at the tone.” Follo...

User’s Guide for the QCP 3035 Phone 83 3. When you are done recording your memo, select and press in to stop. To name a memo Once you finish recording a memo, you may give your memo a name. 1. Select Name and press in. 2. You may enter up to 12 characters for your memo. See page 33, “To enter letter...

84 Voice Features 2. Highlight the appropriate message, and press in to select it. 3. Edit the name or erase the message as desired. To listen to a memo 1. Select Menu → Tools → Voice Memos. 2. Highlight the appropriate message, and press in to select it. 3. Select and press in to play the memo.

User’s Guide for the QCP 3035 Phone 85 8 TROUBLESHOOTING What is my lock code? The default lock code is usually either 0000 or the last four digits of your phone number. If you forget your lock code, call your service provider. How do I lock and unlock the phone? For detailed instructions, see page ...

86 Troubleshooting How do I store phone numbers? From the home screen, enter a phone number and press in. How do I change my banner? Select Menu → Settings → Display → My Banner. Type your text and press in. How do I speed dial? Enter the one- or two-digit speed dial number and press . How do I eras...

User’s Guide for the QCP 3035 Phone 87 My phone displayed the message “Reading Info. Please wait ...” when I turned it on. What does this mean? Your phone is performing routine maintenance. This normally takes a few minutes. My phone is out of memory. What do I do? Erase old messages or contacts or ...

88 Troubleshooting Where to find help Your service provider’s customer support department may be accessible directly from your phone when you dial a number such as *611. They can answer questions about your phone, phone bill, call coverage area, and specific features available to you (such as call f...

User’s Guide for the QCP 3035 Phone 89 • The actual error message or problem you are experiencing. • The steps you took to reproduce the problem. • The phone’s Electronic Serial Number (ESN). To find the ESN, remove the battery as described on page 15. The ESN is on the sticker on the inside of the ...

90 Glossary Glossary ~å~äçÖ=ãçÇÉ A state in which a phone communicates at 800 MHz and sends voices and key beeps as analog sounds. ^ìíçJp~îÉ A feature which allows your phone to prompt you to save a phone number after you have dialed it three times. Äççâã~êâ A Web file that lets you quickly connect ...

User’s Guide for the QCP 3035 Phone 91 Åçåí~Åíë= ÇáêÉÅíçêó A feature of your phone that works like a set of phone index cards, allowing you to save phone numbers and other information. Ç~í~=Å~ÄäÉ An electrical wire capable of transmitting information between two or more devices. ÇáÖáí~ä=ãçÇÉ A state...

92 Glossary Ü~êÇ=é~ìëÉ A delay which is programmed into a stored number. The phone does not continue dialing until you press a specific key. ÜçãÉ=ëÅêÉÉå The screen that appears when the phone is first turned on. âÉó=ÄÉÉé= îçäìãÉ The level of noise that the phone makes when you press a key. âÉóÖì~êÇ ...

User’s Guide for the QCP 3035 Phone 93 éçïÉê=çÑÑ When you turn off the phone, you cannot send or receive calls. éçïÉê=çå When you turn on the phone, you can send and receive calls. êÉÅÉåí=Å~ääë= äáëí A list of phone numbers from recent incoming or outgoing calls, when the phone number is available. ...

94 Glossary ëáÖå~ä= ëíêÉåÖíÜ The degree of radio frequency energy available to the phone. Both weather and distance affect signal strength. If signal strength is weak, call quality may decrease or the call may be disconnected. páäÉåÅÉ=^ää= ãçÇÉ A state in which all phone sounds are silenced, includi...

User’s Guide for the QCP 3035 Phone 95 íê~îÉä= ÅÜ~êÖÉê A cable that connects the phone to a wall outlet and charges the phone battery. íêáãçÇÉ Able to operate in CDMA digital service at 800 and 1900 MHz, and analog cellular service at 800 MHz. roi Uniform Resource Locator, the address of an Internet...

96 User’s Guide for the QCP 3035 Phone Index Numerics 1-Touch Dial, 27, 29 A accessories, 59 travel charger, 2 alarm clock, 63alert roam/service, 52 alert sounds, 43answering calls, 8 B banner my banner, 39see also home screen battery care and safety, 13improving performance, 14removing and insertin...