Page 2 - In this Instruction Handbook, the 1810 is referred to as the; copier; and the 1510 is referred to as the
As an ENERGY STAR Par tner, KYOCERA MITA AMERICA, INC. has determinedthat this product meets the ENERGY STAR guidelines for energy efficiency.* ENERGY STAR is a U.S. registered mark. In this Instruction Handbook, the 1810 is referred to as the 18 ppm (pages per minute) copier and the 1510 is referre...
Page 3 - Symbols
Please read the instruction handbook before using the copier. Keep it close to the copier for easy reference. The sections of this handbook and parts of the copier marked with symbols are safety warnings meant toprotect the user, other individuals and surrounding objects, and ensure correct and safe...
Page 4 - CONTENTS; Replacing the toner container and
i CONTENTS CHAPTER 1 IMPORTANT! PLEASE READ FIRST. .. 1-1 CAUTION LABELS ................................... 1-1 INSTALLATION PRECAUTIONS .............. 1-2 PRECAUTIONS FOR USE ....................... 1-3 CHAPTER 2 NAMES OF PARTS ............................... 2-1 (1) Main body .......................
Page 5 - ii; MAKING FULL USE OF THE MACHINE'S ADVANCED FUNCTIONS
ii MAKING FULL USE OF THE MACHINE'S ADVANCED FUNCTIONS 1 Various functions for making enlarged andreduced copies ■ Enlarging/reducing copies to any sizein the 50 - 200% range<Zoom copy mode> (page 4-3) ■ Making copies using the magnificationratios preset in the copier<Standard zoom mode>...
Page 6 - CAUTION LABELS; Label 2; CHAPTER 1; Label 3
Caution labels have been attached to the copier at the following locations for safety purposes.BE SUFFICIENTLY CAREFUL to avoid fire or electric shock when removing a paper jam or when replacing toner. CAUTION LABELS NOTE: DO NOT remove these labels. Label 2 High temperature inside. Do not touchpart...
Page 7 - Power supply/Grounding the copier; Handling of plastic bags; WARNING; INSTALLATION PRECAUTIONS; Environment; CAUTION
■ Power supply/Grounding the copier WARNING • DO NOT use a power supply with a voltage other than that specified. Avoid multiple connections in thesame outlet. These types of situations present adanger of fire or electrical shock. ................................ • Plug the power cord securely into ...
Page 8 - Cautions when using the copier; PRECAUTIONS FOR USE
Other precautions • DO NOT place heavy objects on the copier or cause other damage to the copier. • DO NOT open the front cover, turn off the main switch, or pull out the power plug during copying. • During copying, some ozone is released, but the amount does not cause any ill effect to one's health...
Page 10 - CHAPTER 2 NAMES OF PARTS
CHAPTER 2 NAMES OF PARTS 2-2 1 DF (Document Feeder)(Open/close to set the original on the platen.) 2 Original table(Place the originals here.) 3 Original insertion guides(Adjust the guides to the width of the originals.) 4 DF open/close handle(Hold this handle when opening and closing the DF.) 5 Ori...
Page 14 - CHAPTER 3 PREPARATIONS BEFORE USE
CHAPTER 3 PREPARATIONS BEFORE USE 3-2 * If the paper reaches the right-hand wall of the drawer, the length guide is not used. Store it in the space shown in theillustration. 5 Set the paper flush against the left-hand wall of the drawer. IMPORTANT * Load paper so that it is kept under the claw of th...
Page 15 - Copier
CHAPTER 3 PREPARATIONS BEFORE USE 2 Pull out the support guide. 3 Adjust the insert guides to the width of the paper to beloaded. 4 Insert the paper along the insert guides as far as it will go. IMPORTANT * When loading paper into the multi-bypass, make sure that the copy side is facing downward. (T...
Page 17 - How to set originals
CHAPTER 3 PREPARATIONS BEFORE USE 2. How to set originals (1) Setting originals into the DF Precautions for the use of DF Do not use any of the originals given below with the DF. Also do notset originals with punch holes or tear-off strips positioned as theleading edge.• Transparency films• Carbon p...
Page 19 - Replacing the toner container and waste toner tank
CHAPTER 3 PREPARATIONS BEFORE USE 3. Replacing the toner container and waste toner tank When the level of toner becomes low, the Add Toner indicator lightsand a toner replacement message is printed out. When the messageis printed, replace the toner container and waste toner tankimmediately. It is st...
Page 21 - Basic copying procedure
4-1 CHAPTER 4 BASIC OPERATIONS 1 1. Basic copying procedure 2 3 4 -1 4. Copy quality selection Copy quality can be selected according to the original type. Press theimage mode selection key to light the respective indicators.To adjust automatically: Auto Exp. indicatorText and photo originals: Text ...
Page 22 - CHAPTER 4 BASIC OPERATIONS
CHAPTER 4 BASIC OPERATIONS 4-2 5 5. Copy exposure adjustment Copy exposure can be selected for all the image modes excluding theauto exposure mode. To make the copy density darker, press the rightcopy exposure adjustment key to move the indication on the exposurescale to the right; to make the copy ...
Page 26 - CHAPTER 5 FUNCTIONS
CHAPTER 5 FUNCTIONS 1 To change the type of the borderline, hold down the 2 in 1/4in 1 key for 5 seconds. “F17” appears on the copy quantitydisplay and then a number appears. The number displayedindicates the type of the borderline as follows: 1: None2: Solid line3: Dotted line (English text panel) ...
Page 29 - Default code; Setting code
6-1 CHAPTER 6 COPIER DEFAULT SETTING 1. Default settings The state the copier is in at the end of warm-up or when the Reset key is pressed is called the initial mode, and the function settings that areautomatically set for the initial mode are called the default settings. The default settings can be...
Page 30 - CHAPTER 6 COPIER DEFAULT SETTING
CHAPTER 6 COPIER DEFAULT SETTING 6-2 Default code F06 F07 F08 F09 F10 Setting item Photo original exposureadjustment Text original exposureadjustment Default drawer Automatic drawer switching Upper drawer paper size Setting code 1: 1 Light2: 23: 3*4: 45: 5 Dark 1: 1 Light2: 23: 3*4: 45: 5 Dark 1: Up...
Page 35 - How to make default settings
CHAPTER 6 COPIER DEFAULT SETTING 6-7 2. How to make default settings 1 Hold down both of the copy exposure adjustment keys for 3seconds. "F00" (default code) appears on the copy quantitydisplay. (English text panel) (Symbol panel) 2 The default code changes each time the Number of Copies/Zoo...
Page 37 - Error and status indications; Indication; Page
7-1 CHAPTER 7 WHEN A PROBLEM OCCURS 1. Error and status indications When any of the indications listed in the table below appears on the operation panel, take the corrective action as instructed. Indication “A” and “100” alternate on the copy quantitydisplay. “C” and “610”, “620”, “630” or “710” alt...
Page 38 - CHAPTER 7 WHEN A PROBLEM OCCURS; Action
CHAPTER 7 WHEN A PROBLEM OCCURS 7-2 Indication “A” and “011” alternate on the copy quantitydisplay. “A” and “040”, “041” or “043” alternate on thecopy quantity display. The Add Toner indicator lights. “AP” appears on the copy quantity display. “PF” appears on the copy quantity display. “E07” appears...
Page 40 - When paper misfeeds
CHAPTER 7 WHEN A PROBLEM OCCURS 2. When paper misfeeds If a paper misfeed occurs, copying will stop. An indication signaling a paper misfeed appears on the operation panel and an indicator lights showingthe location of a paper misfeed. Remove the misfed paper by referring to “(3) Removal procedures”...
Page 45 - Trouble
CHAPTER 7 WHEN A PROBLEM OCCURS 3. Troubleshooting If trouble occurs, carry out the applicable checks and actions given below.If the trouble persists, print out a user status report and contact your service representative. 7-9 Trouble Nothing lights on theoperation panel when themain switch is turne...
Page 47 - CHAPTER 8; Cleaning the copier
Lift open the DF. Wipe the shaded areas shown in the belowillustrations with a soft cloth dampened with alcohol or a milddetergent.* Never use thinner or other organic solvents for this purpose. * If black lines appear on the copy image when the DF is used, the slit glass a is soiled. 8-1 CHAPTER 8 ...
Page 48 - CHAPTER 8 CLEANING AND SPECIFICATIONS
CHAPTER 8 CLEANING AND SPECIFICATIONS 8-2 2. Specifications Type ............................................................................... Desk-topOriginal table .................................................................. Fixed typeCopying system ...........................................
Page 49 - Safety of laser beam; SAFETY OF LASER BEAM; The power to the laser unit is cut off when the front cover is opened.
1. Safety of laser beam This copier has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation andmaintenance. ...
Page 52 - * The above warning is valid only in the United States of America.
WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equi...
