KTI Networks KSD-103-A Series - Manual

Page 2 - without permission from KTI Networks Inc.; United States; BOX; International

(C) 2008 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without permission from KTI Networks Inc. KTI Networks Inc. reserves the right to revise this documen...

Page 4 - Table of Contents

4/20 Table of Contents 1. Introduction ................................................................................................................................5 1.1 Features.................................................................................................................6 1.2 ...

Page 9 - Certificate

9/20 Certificate FCC Part 15 Class B CE/EMC EMI EN50081-1 Class B EMS EN55024 CE/LVD Safety EN 60950 EN 50081-1/1992 : EN55022:1994/A1:1995/A2:1997 EN61000-3-2:2000 EN61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001 IEC 61000-4-2:1995 ESD Test IEC 61000-4-3:1995 RS Test IEC 61000-4-4:1995 EFT/BURST Test...

Page 13 - Using Terminal Blocks

2.5 Applying Power The power specifications of the device are: Operating Voltage +7 ~ +50VDC Power Consumption 4W max. @+50VDC Using Terminal Blocks Either DC1 interface or DC2 interface can be used to receive DC power from an external power system. Or, DC2 also can be used to deliver the power rece...

Page 14 - Using DC Power Jack; outlet. Connect the power adapter to the AC outlet.; Failure Alarm Relay Output; replay output is provided with two contacts labeled

If cascading the power to next device is needed, install the power wires and plug for another switch. Then, use DC2 contacts. Note: Only up to four device units can be cascaded to receive power from one main power input source. Using DC Power Jack DC Jack Connector: D 6.3mm D 2.0mm AC Power Adapters...

Page 16 - Making LAN Connections; Link distance: Up to 100 meters; Auto-negotiation Function; use half duplex for the connection.; Making Fiber Connections; example between two SC fiber ports:; Network Cables

3. Making LAN Connections 3.1 Making Copper Port (RJ-45) Connections The copper ports support the following connection types and distances: Network Cables 10BASE-T: 2-pair UTP Cat. 3,4,5 , EIA/TIA-568B 100-ohm 100BASE-TX: 2-pair / 4-pair UTP Cat. 5, EIA/TIA-568B 100-ohm Link distance: Up to 100 mete...

Page 18 - Application in Industrial Networks; cascaded by fiber cables.; Copper to Fiber Bridging Media Converter Application

4. Applications 4.1 Application in Industrial Networks The following figure illustrates an application example in an industrial network. Four devices are cascaded by fiber cables. 4.2 Copper to Fiber Bridging Media Converter Application 4.3 Bridging Multimode to Single Mode Fiber Converter Applicati...

Page 19 - Model Definition

19/20 5. Appendix 5.1 Model Definition KSD-103-A Model Ext. FX Connector Cable Ref. Distance Operating Temperature -T Duplex ST MMF 2km -10 ~ 70 o C -C Duplex SC MMF 2km -10 ~ 70 o C -C1 Duplex SC MMF 2km -20 ~ 70 o C -SA2 Duplex SC SMF 20km -20 ~ 70 o C -SL2 Duplex SC SMF 20km -20 ~ 70 o C -SL3 Dup...

Page 20 - Optical Specifications

20/20 5.2 Optical Specifications KSD-103-A Model Ext. FX Port Wavelength TX Power Sensitivity RX Max. Power -T FX 1310nm -19 ~ -14dBm -31dBm -14dBm -C FX 1310nm -19 ~ -14dBm -31dBm -14dBm -C1 FX 1310nm -20 ~ -14dBm -31dBm 0dBm -SA2 FX 1310nm -15 ~ -8dBm -31dBm -7dBm -SL2 FX 1310nm -15 ~ -8dBm -30dBm...

KTI Networks KSD-103-A Series - Manual

Table of Contents:

Summary

Other KTI Networks Models