Page 4 - Applications and functions; A. DVD player front panel; POWER
- 4 - DVD-PLAYER KH6517/6518 1. Technical Data This device has been tested and approved in accordance with the basic requirements and other relevent regulations of the EMC guidelines2004/108/EG as well as the guidelines for low voltage appliances2006/95/EG.Power supply: AC 220 V - 240 V ~50 Hz Power...
Page 5 - B. DVD player rear panel; Setting up of the DVD player; Risk of electrical shocks.
- 5 - B. DVD player rear panel h S VIDEO : S Video output j AUDIO OUT L/R : Left and right audio outputs k EURO SCART : Scart/RGB output l CENTER : Output for front and centre audio channels ; SL/SR : Output for rear, left and right audio channels 2) FL/FR : Output for front, left and right audio ch...
Page 6 - Connecting the DVD Player to a television
- 6 - • Never cover the ventilation slots of the device while it is being used. • Do not place any open sources of fire, like candles, on the device. Injury hazard • Keep children away from the connecting cable and the device. Childrenfrequently underestimate the dangers of electrical devices. • Ens...
Page 7 - Connecting to a television via ScartCable/RGB; EURO SCART; Connecting to a television via S-Video; VIDEO
- 7 - 8.1 Connecting to a television via ScartCable/RGB Note: Connecting the DVD player to a television with a Scart cable via the RGBinput offers a high quality connection. Select this connection variation inthe case of televisions equipped with an RGB input. If you are not sure ifthe television is...
Page 8 - Connecting the DVD player via component signal:; Connection via VGA; Connecting the DVD player via VGA:; Connection via HDMI; Connecting the DVD player via HDMI:; Connecting audio components to the DVD; Requirements for the connection of a HiFi system
- 8 - For both variations – "YPbPr" and "YUV"– you will need• an audio cinch cable (not supplied) • an YUV cable (not supplied) These can be obtained from your dealer. On the rear panel of the DVD player you will find the three so called "Com-ponent Colour Out" sockets Y , Pb...
Page 9 - Connecting a HiFi system:; Connecting digital audio components via digital cables; Connection via coaxial cable
- 9 - Connecting a HiFi system: • Connect the audio output sockets L/R on the rear panel of the DVD player to the corresponding audio inputs on the HiFi system with an audio cinchcable. Make sure that the red and white colour markings correspond.• Check with the instruction manual which settings on ...
Page 10 - Connecting audio components via an analogue cable; FL; OSD menu settings; Administering settings via the OSD menu
- 10 - 9.3 Connecting audio components via an analogue cable If a digital input is not available on the audio component you can connectthe DVD player to it via conventional analogue cinch cables. To connect the DVD player with analogue cables:• Plug a cinch cable into each of the sockets FL (front l...
Page 11 - Using the OSD Menu; SETUP; Language Settings; OK
- 11 - 10.1 Using the OSD Menu • To access the DVD players OSD menu press the SETUP button on the remote control. The OSD Menu with its menu options will appear on the televisionscreen: The following menu options can be set: Languages , Video , Audio , Age release and Diverse . • The control buttons...
Page 14 - Initial operation of the DVD player; Inserting the DVD; Inserting memory cards/USB memory sticks; Supported memory card types and capacities
- 14 - 11. Initial operation of the DVD player After you have …• placed the DVD player in a suitable location • connected the DVD player to a television by one of the designated connection options • connected the DVD player, if desired, to a HiFi or Surround system (analogue/digital) for example a D...
Page 15 - Removing memory cards/USB memory sticks
- 15 - SmartMedia memory cards (SM) Note: Only SmartMedia memory cards of type 3.3 V can be used! SmartMediamemory cards of type 5 V cannot be used! You can easily distinguish SmartMedia memory cards by means of the followingdiagram: You must insert the SmartMedia memory cards (3,3V) into the upper ...
Page 16 - STOP
- 16 - 12. Playing back DVDs, VCDs or S-VCDs To play back a DVD/VCD/S-VCD with the DVD player...• Switch on your television. • Make sure that the DVD player is ready for operation. If the television, the DVD player and possibly other connected devices (i.e. anaudio component) are ready for operation...
Page 17 - Title number input via the number buttons
- 17 - Accessing the DVD menu (Menu) Note: This function may not be available on all DVDs! If you attempt to executea function that is not available, the symbol is displayed on the televi- sion screen. With many films on DVDs there is a main menu on the disc which, apart fromthe option of playing ba...
Page 18 - Fast scan forward/backward; AUS
- 18 - • Press the control button to select the – – – marked input field Chapter . Enter the desired chapter with the number buttons 0 to 9 . • Press the control button to select the – – : – – : – – marked input field Time . With the number buttons 0 to 9 enter the time position in hours, minutes an...
Page 19 - Superimpose/fade out subtitles; Change playback language
- 19 - Superimpose/fade out subtitles Note: This function may not be available on all DVDs! If you attempt to executea function that is not available, the symbol is displayed on the tele- vision screen. If the film on the inserted DVD/VCD/S-VCD has subtitles available you cansuperimpose these on the...
Page 20 - Programme example; Superimpose disc information
- 20 - • When you have programmed the desired chapter, select with the controlbuttons the option Start underneath the input fields. Press the OK button. The programmed playback now starts with the chapter entered in the programme memory cell 1. • Within the programmed chapter you can skip to the sta...
Page 21 - Dimmer
- 21 - With DVDs: By pressing the OK button you select between the options Single , Repeat all and Off . • Select Single to continuously repeat the currently playing back chapter until repeat playback is switched off or playback is cancelled by pres-sing the STOP button twice. • Select Repeat all to...
Page 23 - CD Ripping function; Note
- 23 - Effects (JPEG images only) With the Effect function you can cross blend JPEG images with different effects.• Press the ANGLE button during playback. The type of cross blending will be displayed on the television screen: Fade out downwards , Fade out upwards , Superimpose to the centre , Super...
Page 24 - Cleaning of the DVD player; Disposing of the appliance; DIMMER; No sound
- 24 - 15. Cleaning of the DVD player Clean the housing of the DVD player with a slightly damp cloth and a mildcleanser only. When cleaning, make sure that no moisture gets into the DVDplayer!Clean the inside of the disc tray, if necessary, exclusively with a clean drybrush (i.e. a lens brush obtain...
Page 25 - What are Title and Chapter?; Scart
- 25 - D Check by means of the televisions operating instructions to see if settingsto the television may be necessary in order to use the DVD player withthe television. E Check by means of the operating instructions for a potential connectedaudio component if settings to it are necessary in order t...
Page 27 - FOLDER
- 27 - Nero Digital NERO is a dta compresion program, which can compress all video formats toless than 20% of their original size, while still maintaining a high qualiyt. CDs,which have been recorded with NERO, can contain chapters and sub-titles intwo languages. The CDs are operated via the normal ...
Page 29 - Warranty
In order to guarantee a cost free repair procedure pleaseget in touch with the service hotline. Make sure you haveyour sales slip handy. Sender, please write clearly: Last name First name Street City/Town Country Telephone Date/Signature Description of fault : Warranty Com plet el y f ill out t his ...
