Kohler K-410-K-NA- Installation Manual
Kohler K-410-K-NA– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Solder
- Page 3 – Attach the Wall Plate; Finished Wall
- Page 4 – Install the Supplies
- Page 5 – Guide d’installation; Valve de lavabo à montage mural; Outils et matériels; ATTENTION : Risque d’endommagement du matériel.; Coupe tubes
- Page 7 – Installer l’applique murale; Mur fini
- Page 8 – Installer les alimentations
- Page 10 – Guía de instalación; Válvula mural de lavabo; Herramientas y materiales; PRECAUCIÓN: Riesgo de daños a la propiedad.; Soldadura
- Page 12 – Preparación de la instalación; Monte la placa mural; Tornillos
- Page 13 – Instale los suministros
Installation Guide
Wall-Mount Lavatory Valve
M
product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
K-410
1015916-2-E
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
1. Prepare the Site NOTE: The wall plate requires special framing and support considerations. Pay special attention to minimum and maximumfaucet height recommendations noted in the roughing-in sheet. Refer to the roughing-in dimensions for additional mountinginformation. A suggested framing example ...
3. Install the Supplies Install 1/2 ″ hot and cold supply piping to the mixer valve. Temporarily pull the plaster guards from the handle and spoutshanks. Do not discard them at this time. Position a bucket in front of the spout shank, and turn on thewater supplies to the mixer valve. Slowly open the...
