Page 2 - READ BEFORE INSTALLATION; Carefully check all contents of packages.; IF THERE IS ANY PROBLEM:; Contact your merchant for product replacement due to shipping; PRODUCT HAS BEEN INSTALLED
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects. 3. Have a certified contractor/electrician test the unit before installation. IF THERE IS ANY PROBLEM: 1. DO NOT INSTA...
Page 3 - CONTENTS; - READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING -; A L L W I R I N G M U S T B E D O N E B Y A P R O F E S S I O N A L A N D I N
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......................................................................... 1 COMPONENTS OF PACKAGE ....................................................................................... 3 INSTALLATION ................
Page 4 - IMPORTANT SAFETY INSTRUCTIONS; - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -; ) Ducted fans must be vented to the outside.; TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE; power from switching on accidentally.
1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING. 1) Installation and electrical wiring must be done by qualified professionals and in accordance with all applicabl...
Page 5 - CAUTION; ELETRICAL SHOCK HAZARD
2 What to Do In The Event Of a Range Top Grease Fire • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT ...
Page 6 - COMPONENTS OF PACKAGE; (Must keep all material for returns or refunds); For Under Cabinet Application; ” Round Plastic Exhaust; FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE
3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) For Under Cabinet Application CH7730SQ6- XX (30”) / CH7736SQ6-XX (36”) / CH7748SQ6-XX (48”) Range Hood Box {A} KOBE Range Hood {B} Warranty Registration Card {C} Quick Reference Guide {D} Stainless Steel Filter x 1 {E} Airflow E...
Page 7 - For Wall Mount Application
4 (Must keep all material for returns or refunds) For Wall Mount Application CH7730SQ6-WM- XX (30”) / CH7736SQ6-WM-XX (36”) / CH7748SQ6-WM-XX (48”) Range Hood Box {A} KOBE Range Hood {B} Warranty Registration Card {C} Quick Reference Guide {D} Stainless Steel Filter x 1 {E} Airflow Efficiency Panel(...
Page 8 - INSTALLATION; PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING; Calculation before Installation; TABLE 1; F = Height of the Hood Installation
5 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1 and TABLE 2. (All calculation in inches). - FOR UNDER THE CABINET - TABLE 1 A = Height of Floor to Ceiling B = Height of Floor to Counter Top (Standard:...
Page 9 - SAFETY WARNING; OVER TIGHTEN SCREWS AS THIS MAY CAUSE DAMAGE TO THE HOOD.
6 SAFETY WARNING HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF REMOVING ANY PARTS FOR INSTALLING, CLEANING OR SERVICING. NOTE: DO NOT USE AN ELECTRIC SCREWDRIVER. USE HAND TOOLS ONLY. DO NOT OVER TIGHTEN SCREWS AS THIS MAY CAUSE DAMAGE TO THE HOOD. Installation Contents UNDER CABI...
Page 10 - UNDER CABINET INSTALLATION; Preparation before Installation; Hood Installation; CAUTION: Do not use an electric screwdriver.; CAUTION: MAKE SURE THE HOOD IS; Figure 1
7 UNDER CABINET INSTALLATION Applicable Model: CH7730SQ6- XX (30”) / CH7736SQ6-XX (36”) / CH7748SQ6-XX (48”) Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENTION. - Decide the location of the venting pipe from the hood to the outside. (Fi...
Page 11 - Figure 5
8 Ductwork Installation 5. Use steel pipe to connect the 6” round plastic collar {F} on the hood to the ductwork above. Use duct tape to make all joints secure and air tight. Refer to Figure 6. Wiring to Power Supply THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELEC...
Page 12 - WALL MOUNT INSTALLATION; Figure 8; Mounting Screws
9 WALL MOUNT INSTALLATION Applicable Model: CH7730SQ6-WM- XX (30”) / CH7736SQ6-WM-XX (36”) / CH7748SQ6-WM-XX (48”) Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. - Decide the location of the venting pipe from the hood to the outside...
Page 13 - Attach Together
10 Wiring to Power Supply THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SW...
Page 14 - OPERATING INSTRUCTIONS; Button; presence of a flame or fire, the hood will turn on automatically.
12 OPERATING INSTRUCTIONS Button Power Light Decrease Fan Speed ECO Mode Increase Fan Speed LED Display Indicator ECO Mode Icon Auto Mode Icon QuietMode ™ Speed #1 Speed #2 Speed #3 Speed #4 Speed #5 Auto Mode • The hood has advanced built-in flame and temperature sensors. When the sensor detects th...
Page 16 - Decrease fan speed
14 Light Control Press the light button to turn the LED lights ON. Each press of the button will cycle the light intensity through bright, medium bright, dim and off. Lights are controlled independently from power and speed control. Lights will not turn off by itself in delay shut-off, so please be ...
Page 17 - MAINTENANCE; Use dry soft towel to dry the hood.
15 MAINTENANCE For optimal performance, clean the range hood surface and filters regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. ***Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth...
Page 18 - SPECIFICATIONS
16 SPECIFICATIONS MODEL / SIZE Under Cabinet Application Wall Mount Application CH7730SQ6- XX (30”) CH7730SQ6-WM-XX (30”) CH7736SQ6- XX (36”) CH7736SQ6-WM-XX (36”) CH7748SQ6- XX (48”) CH7748SQ6-WM-XX (48”) COLOR 18-Gauge Commercial Grade Stainless Steel CONSUMPTION / AMPERE 420W / 3.5A Power Rating ...
Page 19 - MEASUREMENTS & DIAGRAMS; - FOR UNDER THE CABINET
17 MEASUREMENTS & DIAGRAMS ***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in ( ) are millimeters. - FOR UNDER THE CABINET – MODEL NO.: CH7730SQ6- XX (30”) / CH7736SQ6-XX (36”) / CH7748SQ6-XX (48”) - FOR WALL MOUNT – MODEL NO.: CH7730...
Page 21 - PARTS LIST; DESCRIPTION
19 PARTS LIST MODEL NO.: CH7730SQ6- XX (30”) CH7736SQ6- XX (36”) CH7748SQ6- XX (48”) NO. DESCRIPTION MODEL / SIZE PART NO. 1 6” Round Plastic Exhaust L1-0505-0007 2 Blower System L1-0320-0120-590RO 3 Stainless Steel Filter B101-27300-09-M 4 Temperature Sensor L1-0404-3001-C 5 Motor Transformer L1-04...
Page 25 - CIRCUIT DIAGRAM
23 CIRCUIT DIAGRAM MODEL NO.: CH7730SQ6-XX and CH7730SQ6-WM- XX (30”) CH7736SQ6-XX and CH7736SQ6-WM- XX (36”) CH7748SQ6-XX and CH7748SQ6-WM- XX (48”)
Page 26 - TROUBLE SHOOTING; Issue
24 TROUBLE SHOOTING Issue Possible Cause Solution After installation, both motors and lights are not working. The power is not on. Make sure the circuit breaker and the unit’s power is ON. Use a voltage meter to check the power supply. The wire connection is not secure. Check and tighten wire connec...
Page 27 - WARRANTY; WARRANTY CERTIFICATE; TWO-YEAR LIMITED PARTS WARRANTY ON KOBE PREMIUM SERIES:; abrasive cleaning products.
25 WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Please keep a copy of your original invoice as proof of purchase. TWO-YEAR LIMITED LABOR WARRANTY ON KOBE PREMIUM SERIES: For two years from the date of yo...
Page 28 - THIS WARRANTY WILL BE VOIDED BY:; residential indoor usage.
26 THIS WARRANTY WILL BE VOIDED BY: 1. Improper installation and failure to follow installation instructions. 2. Any repair, alternation, modification not authorized by KOBE. 3. Duct alternation, modification and connection. 4. Incorrect electric current, voltage or wiring. 5. Improper usage of the ...
Page 29 - WARRANTY INFORMATION FORM; Fill in the blanks and keep this paper with the; original invoice; in a; For warranty service or spare parts purchase in US, contact:
27 WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : ______________________________ 2. Model No. : ______________________________ 3. Serial No. : ______________________________ For warranty ser...
Page 30 - KOBE Range Hoods; Using a KOBE hood overseas is at your own risk and
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood ov...
