Page 2 - Table of Contents
FOOD PROCESSOR SAFETY Important Safeguards .......................................................................................................5 Electrical Requirements ...................................................................................................6 Electrical Equipment Waste ...
Page 3 - English; IMPORTANT SAFEgUARDS; SAVE ThESE INSTRUCTIONS; FOOD PROCESSOR SAFETY
5 English IMPORTANT SAFEgUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Food Processor in water or other liquid. 3. This appliance is not intende...
Page 4 - Electrical Requirements
6 FOOD PROCESSOR SAFETY Electrical Requirements Voltage: 220-240 VoltsFrequency: 50/60 HertzWattage: 300 WattsNOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. This appliance is marked according to the European directive 2002/96/EC on W...
Page 5 - Food Processor Parts
7 English PARTS AND FEATURES Reversible (2 mm and 4 mm) Shredding Disc Externally Adjustable Slicing Disc (Thin to Thick) Stainless Steel Multipurpose blade Dough blade Disc Adapter Slicing Adapter Drive Adapter 950 mL (4-Cup) Mini-bowl and Mini-blade base 3.1 L (13-Cup) Work bowl Work bowl Cover wi...
Page 6 - ACCESSORIES; Included Accessories; Important Food Processor Features
8 PARTS AND FEATURES Externally Adjustable Slicing Control KitchenAid’s exclusive externally adjustable slicing disc allows you to adjust slicing thickness from thin to thick, without having to remove the blade assembly. With the slicing disc installed, simply slide the Slicing Thickness Control to ...
Page 7 - Disc Assembly Overview
9 English ACCESSORIES Disc Assembly Overview There are two different disc adapters included with the food processor. One is used exclusively with the adjustable slicing disc. The other is used with the Reversible Shredding Disc and all other optional discs. Adjustable Slicing Disc Reversible Shreddi...
Page 8 - Accessories Selection guide; Action
10 ACCESSORIES Accessories Selection guide Cheese Chocolate Fruit Fresh Herbs Nuts Tofu Vegetables Meat Pasta Sauce Pesto Salsa Sauces Cake Batter Pie Dough Eggs Yeast Dough Potatoes Vegetables (soft) Cabbage Cheese Chocolate Fruit (hard) Vegetables (hard) Fruit (soft) Potatoes Tomatoes Vegetables (...
Page 9 - before First Use; PREPARINg ThE FOOD PROCESSOR FOR FIRST USE; Storing Parts
11 English before First Use Before using your Food Processor for the first time, wash the work bowl, work bowl cover, mini-bowl, feed tube pushers, discs, and blades either by hand or in the dishwasher (see “Cleaning the Food Processor”). Removing the Work bowl Cover from the Work bowl Your Food Pro...
Page 10 - SETTINg UP YOUR FOOD PROCESSOR; Attaching the Work; Attaching the Work bowl
12 SETTINg UP YOUR FOOD PROCESSOR 3. Grasp the work bowl handle and turn the bowl counterclockwise to lock it on the base. Select the accessory you would like to use and install it according to the instructions on the following pages. Attaching the Work bowl Cover NOTE: Be sure to install the desire...
Page 11 - Installing the Adjustable; Adjusting the Slicing
13 English Installing the Adjustable Slicing Disc SETTINg UP YOUR FOOD PROCESSOR 1. With the work bowl installed, place the drive adapter on the power shaft of the base. TIP: You may need to turn the disc/drive adapter until it drops down into place. 3. Lower the slicing blade and slicing adapter on...
Page 12 - Installing the Shredding Disc
14 SETTINg UP YOUR FOOD PROCESSOR Installing the Shredding Disc 1. Holding the disc by the 2 finger grips, insert the disc adapter into the hole in the bottom of the disc. 2. Slide the drive adapter into the disc adapter as far as it will go, until it clicks into place. IMPORTANT: When using the rev...
Page 13 - Installing the Mini-bowl and; Installing the Multipurpose
15 English Installing the Mini-bowl and Mini-blade 1. Place the mini-bowl inside the work bowl over the power shaft. Rotate the mini- bowl until the tabs on the top edge of the bowl drops into the indents on the top of the work bowl. 2. Insert the drive adapter into the mini- blade, and place on the...
Page 14 - Installing the Egg Whip
16 Using the 3-in-1 Feed Tube The 3-in-1 feed tube features a 3-piece food pusher. Use the entire food pusher to process large items, or use the inner portions to create medium-sized or small feed tubes to process smaller items. To slice or shred small items, insert the 3-piece food pusher into the ...
Page 15 - USINg YOUR FOOD PROCESSOR; before Use; Using the Pulse Control
17 English USINg YOUR FOOD PROCESSOR before Use Before operating the Food Processor, be sure the work bowl, blades, and work bowl cover are properly assembled on the Food Processor base (see “Setting Up Your Food Processor”). Maximum Liquid Level This line on the work bowl indicates the maximum leve...
Page 16 - Removing Processed Foods
18 USINg YOUR FOOD PROCESSOR 1. Press the O (OFF) button.2. Unplug the Food Processor before disassembling. 3. Turn the work bowl cover to the left and remove. 6. Turn the work bowl to the left to unlock it from the base. Lift to remove. Removing Processed Foods 4. If using a disc, remove it before ...
Page 17 - Using the Multipurpose blade; CARE AND CLEANINg
19 English 1. Press the O (OFF) button.2. Unplug the Food Processor before cleaning. 3. Wipe the base and cord with a warm, sudsy cloth, and wipe clean with a damp cloth. Dry with a soft cloth. Do not use abrasive cleansers or scouring pads. 4. Please note these BPA-free bowls require special handli...
Page 18 - TIPS FOR gREAT RESULTS; Using a Slicing or Shredding
20 TIPS FOR gREAT RESULTS To chop nuts or make nut butters: Process up to 3 cups (710 mL) of nuts to desired texture, using short pulses, 1 to 2 seconds each time. For a coarser texture, process smaller batches, pulsing 1 or 2 times, 1 to 2 seconds each time. Pulse more often for finer texture. For ...
Page 19 - Using the Dough blade; helpful hints
21 English Using the Dough blade To shred firm and soft cheeses: Firm cheese should be very cold. For best results with soft cheeses, such as mozzarella, freeze 10 to 15 minutes before processing. Cut to fit feed tube. Process using even pressure. TIPS FOR gREAT RESULTS To slice cooked meat or poult...
Page 21 - TROUbLEShOOTINg; household KitchenAid Food Processor Warranty; SERVICE AND WARRANTY
23 English Food Processor not shredding or slicing properly: • Make sure the raised-blade side of the disc is positioned face up on the common adapter. • If using the adjustable slicing blade, make sure it is set to the correct thickness. • Make sure ingredients are suitable for slicing or shredding...
Page 22 - Service Centers
24 SERVICE AND WARRANTY Service Centers All service should be handled locally by an Authorized KitchenAid Service Center. Contact the dealer from whom the unit was purchased to obtain the name of the nearest Authorized KitchenAid Service Center.In the U.K.:Call: 0845 6011 287 In Ireland: M.X. ELECTR...
