Kenwood TK-7180- Manual

Table of Contents:

• Page 2 – The models listed below are covered by this manual:; VHF FM Transceiver; power immediately. Contact your KENWOOD dealer.
• Page 3 – ii; One or more of the following statements may be applicable:
• Page 4 – iii; CONTENTS
• Page 5 – iv; GPS R
• Page 6 – UNPACKING AND CHECKING EQUIPMENT; Microphone
• Page 7 – The following tools are required for installing the transceiver:; • Circle cutters; compartment, from the passenger compartment.; • Locate the fuse as close to the battery as possible.; Coil and secure the surplus cable with a retaining band.; servicing while keeping the power applied.; PREPARATION
• Page 8 – location where it will be within easy reach of the user.
• Page 9 – GETTING ACQUAINTED; key
• Page 10 – il
• Page 12 – PROGRAMMABLE FUNCTIONS; keys can be programmed with the
• Page 13 – OPERATING BASICS; Press the switch to switch the transceiver ON.; To enter the password:; Press the and keys to select a digit.; To enter the password using an optional DTMF keypad:; Press the DTMF keys corresponding to the password digits.; A or DTMF # key to delete all entered characters.; Press the S or DTMF; key to confirm the password.
• Page 14 – ID; • The default setting for the
• Page 15 – TRUNKING ZONES; Select the desired zone and group ID using the Zone and CH/GID keys.; automatically search for a Telephone Repeater.; • Confirm that there is a dial tone after you release the PTT switch.; Press and hold the PTT switch to speak, and release it to receive.; • Only one person can speak at a time.
• Page 16 – CONVENTIONAL ZONES; not the channel is free.; • If the channel is busy, wait until it becomes free.; Select the desired zone and channel using the Zone and CH/GID keys.; • Alternatively, you can turn the Scan function on if desired.
• Page 17 – Select your desired zone and channel.; To switch OST On or Off, press the key programmed as OST.; To change the preset encode/ decode tones:
• Page 18 – SCAN; To activate Scan, press the key programmed as Scan.
• Page 20 – FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION; Press the PTT switch and begin your conversation.
• Page 21 – Status to enter Selcall Mode.; key to initiate the Status call.
• Page 22 – Press any key to return to Normal Operation Mode.; Press and hold the key programmed as Selcall, Status, or Selcall +
• Page 24 – DTMF N; key to store the entered name and number in the
• Page 25 – key to delete the entry from the Autodial list.; You can redial the last number you transmitted.; key followed by the DTMF 0 key to display the last called; Disconnect ID: Press the DTMF
• Page 26 – DTMF S; • The LED indicator flashes orange.
• Page 27 – EMERGENCY CALLS; Press and hold the key programmed as Emergency.; you must hold the Emergency key will vary.; To exit Emergency mode, press and hold the Emergency key again.
• Page 28 – ADVANCED OPERATIONS; • The icon appears on the display while Talk Around is active.; Your dealer can program a key with one of 4 functions:; Signaling. Press the key again to return to normal operation.; To adjust the squelch level in Conventional operating mode:; Press the key programmed as Squelch Level.
• Page 29 – To activate the scrambler, press the key programmed as Scrambler.; • The icon appears on the display while the scrambler is active.; To deactivate the scrambler, press the Scrambler key again.; the transceiver power ON.; • The current year setting appears.; Press the and keys to select the year, then press the S key to cycle; to the month setting.; Press the S key again, to return to the year setting.
• Page 30 – LCD B; • The icon appears on the display while Horn Alert is active.; To use the PA system:; Press the key programmed as Public Address.; • The icon appears on the display while the PA system is active.; Press the PTT switch, then speak into the microphone.
• Page 31 – BACKGROUND OPERATIONS; Strong signal
• Page 32 – VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT; • The auto recording indicator (; To record a voice memo, for later playback:; Press and hold the key programmed as Playback for 1 second.; key to end the recording at any time and store it into the; voice memo to memory.
• Page 33 – ” appears on the display.; Press the key programmed as Playback to enter Playback mode.; automatically play back.