Kenmore Range 790.7131- User Manual

Page 2 - for the serial plate location.; Table of Contents; IMPORTANT SAFETY INSTRUCTIONS; Product Record; Serial Plate Location; Kenmore Appliance Warranty; One Year Limited Warranty; to arrange for free; Disclaimer of implied warranties limitation of remedies

2 In this space below, record the date of purchase, model andserial number of your product. You will find the model and serialnumber printed on an identification plate. This serial plate islocated on the right side of the oven front frame in the storagedrawer or lower panel compartment area. See bot...

Page 3 - Important Safety Instructions; ENGLISH; use this appliance as a space heater

3 Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. This symbol will help alert you to situations that may cause ser...

Page 4 - IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN

4 • Placement of Oven Racks. Always place oven racks in desired location while oven is cool. If rack must be moved while oven ishot use extreme caution. Use potholders and grasp the rack withboth hands to reposition. Do not let potholders contact the hotheating elements in the oven. Remove all utens...

Page 5 - Important Safety Notice

5 ENGLISH Important Safety Notice The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances knownto the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential expos...

Page 6 - Setting Proper Surface Burner Flame Size; For most cooking; Setting Surface Controls; For deep fat frying,

6 Do not place plastic items such as salt and pepper shakers,spoon holders or plastic wrappingson top of the range when it is in use. T h e s e i t e m s c o u l d m e l t o r i g n i t e .Potholders, towels or wood spoons couldcatch fire if placed too close to a flame.In the event of an electrical ...

Page 7 - Before Setting Oven Controls; Oven Vent Location; The oven vent is located; below the backguard; When the oven is on, warm air is; Arranging Oven Racks; Always use oven mitts when using the oven.; Oven Control Functions; READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.; For satisfactory use of your oven, become familiar with; Rack Position; Removing & Replacing Oven Racks; To remove; Arranging Oven Racks with 6 Rack Positions; To bake on a single rack

7 Before Setting Oven Controls Oven Vent Location The oven vent is located below the backguard . When the oven is on, warm air is released through this vent. This venting is necessary for proper air circulation in theoven and good baking results. DO NOT BLOCK THE OVEN VENT. Arranging Oven Racks ALWA...

Page 8 - To Set the Controls for Baking:; Setting Oven Controls; Changing the Temperature Display Mode; OR; FFFFF; cancel

8 Note: The time of day must first be set in order to operate the oven. To Set the Clock When the range is first plugged in, or when the powersupply to the range has been interrupted, the display willflash "12:00". 1. Press . 2. Within 5 seconds, press and hold the or until the correct time ...

Page 9 - DO NOT use the broiler drawer for storage.; Items placed in the broiler drawer will catch fire.

9 ENGLISH Fig. 1 Fig. 2 To Broil: 1. Slide broiler drawer out to the stop position. 2. Remove broiler pan and insert (See Fig. 1). 3. Always postion rack before setting control, while range iscool. 4. Postion rack by tilting front of rack and pulling rack out fromlocating holes in rear of broiler dr...

Page 10 - Changing the Oven Light; General Care & Cleaning

10 Changing the Oven Light (some models) On some models, the oven light automatically turns on when the door is opened.Some models have a switch located on the control panel to turn on the light. The ovenlight is located at the rear of the oven and is covered with a glass shield held by a wireholder...

Page 11 - Use caution when replacing the burner cap; Sears Service Center.; Do not attempt to remove or lift the cooktop.; Cleaning the Cooktop; How to Clean

11 ENGLISH Use caution when replacing the burner cap so the electrode is not damaged. This may cause adelayed ignition or prevent the burner from igniting. Any additions, changes or conversions required in order for this appliance to perform satisfactorily must bemade by an authorized Sears Service ...

Page 12 - Removing & Replacing the Oven Door

12 To Clean the Recessed and Contoured Areas of the Cooktop - If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbentcloth. Rinse with a clean, damp cloth and wipe dry. To Remove and Replace the Surface Burner Caps and Surface BurnerHeads - Remove in the following...

Page 13 - Before You Call; Solutions to Common Problems

13 ENGLISH Before you call for service, review the following list. It may save you time & expense. The list includes common occurrences (shown in bold) that are not the result of defective workmanship or materials in this appliance. The possible corrections to theseproblems are provided with the...

Kenmore Range 790.7131- User Manual

Table of Contents:

Summary

Other Kenmore Models