Jwin JT-P870 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
10
11
12
Table of Contents:
Page 2 – TABLE OF CONTENTS
Page 3 – FEATURES; CALLER ID FUNCTIONS
Page 4 – Diagram
Page 5 – INSTALLATION; Easy Set Up; Use the flat cord to connect the phone base to the wall jack.; SETTINGS; Area Code Setting; Repeat first two steps to set the second and the third numbers.
Page 7 – Use steps 2-3 to set the remaining digits.; OPERATION; once and the LCD will display the message, ‘NEW CALL PROTEC’.
Page 8 – Caller ID Status Messages; This message indicates that the call is made through a telephone; Dial Back Incoming Calls; The telephone will immediately play the OGM1 after recording.
Page 9 – Memory full, please call again later; Record a Memo; Memory full
Page 10 – VOX Function
Page 12 – SAFETY INSTRUCTIONS; Handle the phone carefully. Do not drop it.; REMARKS; Remove the batteries.
Loading the manual
12/19/2003 8:34 AM
1
jWIN
jWIN Electronics Corporation
digital generation
JT-P870
OWNER’S MANUAL
and
OPERATING INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 - TABLE OF CONTENTS
12/19/2003 8:34 AM 2 TABLE OF CONTENTS FEATURES .................................................................................................................................. 3 Diagram...................................................................................................................
Page 3 - FEATURES; CALLER ID FUNCTIONS
12/19/2003 8:34 AM 3 FEATURES CALLER ID FUNCTIONS ANSWERING MACHINE FUNCTIONS LED For Incoming Call 14 Mins Of Voice Storage English/Spanish/French Selectable Voice Date/Time Stamp (Dts) Up To 65 Incoming Call Memory Up To 59 Recorded Messages 15 Digit Name Display, 14 Digit Telephone # Display OGM1...
Page 4 - Diagram
Page 5 - INSTALLATION; Easy Set Up; Use the flat cord to connect the phone base to the wall jack.; SETTINGS; Area Code Setting; Repeat first two steps to set the second and the third numbers.
12/19/2003 8:34 AM 5 INSTALLATION Easy Set Up 1. Use the coiled cord to connect the receiver to the phone base or console. 2. Use the flat cord to connect the phone base to the wall jack. 3. Insert the 9V DC Adapter in the topside of the phone base and connect the opposite end to an electrical outle...
Page 7 - Use steps 2-3 to set the remaining digits.; OPERATION; once and the LCD will display the message, ‘NEW CALL PROTEC’.
12/19/2003 8:34 AM 7 Setting the Remote Security Code The remote security code is initially preset to ‘000’. The code range is from 000 to 999. Reset the security code as follows: 1. Depress the [ANSWER] key for about 2 seconds; the telephone will display ‘security code’. 2. Use the [OGM] or [MEMO] ...
Page 8 - Caller ID Status Messages; This message indicates that the call is made through a telephone; Dial Back Incoming Calls; The telephone will immediately play the OGM1 after recording.
12/19/2003 8:34 AM 8 Caller ID Status Messages ‘UNAVAILABLE’ - This message indicates that the call is made through a telephone company which does not offer Caller ID service. ‘BLOCKED CALL’ - If the call is restricted, the LCD will display ‘BLOCKED CALL’ . Dial Back Incoming Calls a) To dial back l...
Page 9 - Memory full, please call again later; Record a Memo; Memory full
12/19/2003 8:34 AM 9 OGM2 The JT-P870 Telephone has a backup message, the OGM2, which takes over when the message recorder has reached full capacity. The recording capacity for this phone is as follows: - 59 messages, or - 14 minutes of recording time OGM2 gives callers the following message: “ Memo...
Page 10 - VOX Function
12/19/2003 8:34 AM 10 ICM - Answer On/Off Function When a call is received in Answer ‘ON’ mode: a) If there are no newly recorded incoming messages, the telephone will play the OGM1 message after 4 rings. b) If there are new ICM messages recorded, the telephone will play the OGM1 message after 2 rin...
Page 12 - SAFETY INSTRUCTIONS; Handle the phone carefully. Do not drop it.; REMARKS; Remove the batteries.
12/19/2003 8:34 AM 12 IMPORTANT NOTES: To operate this unit with all features active, you must have ‘CALLER ID SERVICE’ setup with your local telephone company. Some functions such as ‘CALLER NAME ID’ will only operate if such services are included in the user’s Caller I.D. program with the local te...
